Why not FF 3.6.24 write 'Close tab' in the Console log?

Similar Questions

• Windows Explorer is not responding. you want to wait, close or restart the program

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs: WINDOS VISTA
  • Error messages: WINDOWS EXPLORER IS NOT ANSWER
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why not convert a Microsoft Office Document to PDF using the context Menu?

  Why not convert a Document Microsoft Office 2013 in PDF format using the options in the context Menu? (Ex: convert to PDF, combine taken files supported in PDF?)

  I've recently upgraded to Acrobat PRO of XI, but now I am unable to combine or convert microsoft word documents to PDF format.

  In Adobe Acrobat X, I had this function below, and he could combine the Microsoft Office Documents in a single PDF. Now I have over this issue in Adobe Acrobat Pro XI. It seems as if it was the program called Adobe Elements having performed the conversion.

  

  You can try to repair the installation of office 2013 by using the microsoft Support article: http://support.microsoft.com/kb/2464297/en-us

  Try to repair the Acrobat pro also, you must use the same options

  Trees try to repair office and Acrobat. Re start the computer and try once more.

• Why my Windows Vista Ultimate PC keep close (turn to the)?

  My PC suddenly started to fade.  Things worked very well and then all of a sudden it's as if someone just keeps pushing the power button to do a forced hard shutdown.  This happens several times a day now (started last week).  I have scanned for viruses/malware and performed maintenance such as checking errors in registry, checkdisk, own drive for temporary files, and so on with no resolution. My PC is a HP Pavilion dv6000.  My drivers are all up to date, and all my windows and other products Microsoft (automatic updates regularly) software.

  Hello David,.

  Answers to your questions:

  1 NO.

  2 NO.

  3 NO.

  After a lot of research on the internet on this kind of problem, I saw a number of people who spoke a coup without turnoff of warning being due to heat issues.  Assuming that the problem was due to my computer overheating so I used little of compressed air to blow on all areas of the event and around the fan on the underside of the laptop. After doing this, my computer seems to be less noisy (not too strong fan) and overall failure is less heat.  I did have a recurrence of the problem in the last 24 hours while it was intermittent occurring since the last few days.  I had recently traveled with the computer in a more humid environment that my house so don't know if this helped.

  I also checked the event logs for events around the time I knew the computer shuts off but can't find anything notable that said something about heat material or similar.

  Thanks for your attempt to help.

• How to restore the button 'Close tab' at the END of the tab bar?

  Until FF31, I used the following configured setting that installs the small 'X' button which tabs off the tabs themselves and on the far right of the bar closed tabs.

  browser.tabs.closeButtons; The user's game; Integer; 3

  No, this no longer works. It is always placed close buttons in the buttons on the tab. Until I can understand how to solve this problem, I'll be move back to a previous version. I can't for the life of see me why this feature has been removed, other than the apparently arrogant insistence of Mozilla that he knows what the people want better than them.

  You can watch these extensions.

  • tabs restored closebutton: https://addons.mozilla.org/firefox/addon/tabs-closebutton-restored/
  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/

  You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.

• Why can't I just open a new tab with the "Plus" sign or "command-T"?

  If I want to open a new tab, I either press 'Command T' or select 'New tab' in the file menu, or click on the little "plus" sign in my tab bar - right? None of them work. What Miss me?

  This problem is Firefox on your Mac?

  Perhaps users have discovered that this problem is caused by led modules, for example a plugin Conduit and/or an extension "Community Toolbar".

  You can check and disable the extensions on page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, when in doubt, turn off.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  What helps with the button "+"? If so, you can name the specific extension that caused the problem?

  You can also see the Plugins page modules. You can never use 'activate' to disable plugins that you do not usually use.

• Why suddenly I "You've opened a new tab" on the page every time I open a new tab?

  All of a sudden a few days, instead of a blank page when I open a new tab, Foxfire began to display a whole thing under the heading "you've opened a new tab". I am quite aware that I opened a new tab. I purposely, and I do it all the time. There is a checkbox "don't show me this page again" to check, but I already checked it several times and it doesn't change anything. Why this message start showing and, more importantly, how can I get to stop?

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works find in safemode, then it's probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can turn off this add-on and report the problem to the developer of this - on Add.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

  If none of these works, please see Preferences are not saved, that includes a few steps, you can take which should solve the problem.

  In addition, you should start getting ready to upgrade to Firefox 11. Firefox 3.6 support will be removed in a few weeks, which means he will receive more updates of stability or security. 11 Firefox is up to 7 times faster than 3.6, has many new features and improvements, as well as support for new web standards. http://www.Mozilla.org/en-us/Firefox/features/ and Update Firefox have more information.

• 31.0a2 (2014-05-06), since this version cannot close tabs, when the tab is closed, it became inactive, but still visible, I had disabled tab mix addon but nada

  When closing the tab, it became inactive but still visible, I had turned off the mix tab add on but Nada, same problem. What should I do my Aurora lots of tabs, that I don't have.
  Restart Aurora did not help eider.
  Please fix it, thank you

  Hello again,
  OK, that's the Tab Mix Plus that disrupt the system, had a drink in 31.0a2 (2014-05-07), I would try to install their last WORM DEV as they suggest, but no change, then I would disable it for now to know their answer on.
  one thing: it is impossible to disable or enable the Adds in safemode, but no problem to start, restart aurora whenever he asked the condition.
  Thank you

• PROCESS ASSETS PREVENTS THE CLOSE OPERATION IN THE ALERTS LOG

  Immediate stop seems to be hanged for a few hours...
  
  Alert log says that...
  
  PROCESS ASSETS PREVENTS THE CLOSE OPERATION...
  
  Excerpt from alert_log:
  
  
  STOP: Active processes prevent the functioning of the stop
  Thu Aug 12 11:52:59 2010
  STOP: Active processes prevent the functioning of the stop
  Game 12 Aug 11:58 2010
  STOP: Active processes prevent the functioning of the stop
  Thu Aug 12 12:03:01 2010
  STOP: Active processes prevent the functioning of the stop
  Thu Aug 12 12:08:03 2010
  STOP: Active processes prevent the functioning of the stop
  Thursday, August 12 at 12:13:04 2010
  STOP: Active processes prevent the functioning of the stop
  Thursday, August 12 at 12:18:05 2010
  STOP: Active processes prevent the functioning of the stop
  Thu Aug 12 12:23:07 2010
  STOP: Active processes prevent the functioning of the stop
  Thursday, August 12 at 12:28:08 2010
  STOP: Active processes prevent the functioning of the stop
  Thu Aug 12 12:33:09 2010
  STOP: Active processes prevent the functioning of the stop
  
  
  Thanks in advance...
  Kind regards
  New2DBA

  Connect sqlplus "virtue sysdba" shutdown abort refer below metalink doc
  * Getting stop: active processes prevent the operation of the judgment [ID 780167.1] *.

• Why I can't change what open my tabs of the page?

  When I open a new tab, it evokes a search engine of delta, I tried to change it and I can't seem to change.

  See:

  • [949921/questions/949921]
  • [943111/questions/943111]

• After the ff6 3.5 update, I don't have the orange button ff. Why not?

  Update 3.5 to 6. Supposed to have a button menu firefix.
  I haven't it. Why not??

  Maybe because you're showing the bar menu, which is supposed to be one or the other.

  View > toolbars > (uncheck) menu bar

  Or maybe you are in mode full screen that is pushed power with F11

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  You can make Firefox 6.0 look to Firefox 3.6. *, see numbered items 1-10 of the next topic difficulty Firefox 4.0 UI toolbar, problems (make Firefox 4.0 to 6.0, resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#fx4interface

  It is much more beyond these first 10 steps in the list, if you want to make Firefox more functional.

• Y at - it a shortcut to 'return' or 'close tab', according to?

  When you browse a topic, I often Google it, then command-click on the links to open them in new tabs. While they are loading, I can continue browsing the Google page for more links.

  Then, when I start to visit the newly created tabs, I click on links in them, sometimes with and sometimes without, command. This generates a tree of Web pages, some on a tab and some different tabs, but all on the same subject.

  When I want to cut a branch of the tree, I can use the shortcut "command-[]" (back), if the arrow is dark, or "command-W" (Close Tab) if the arrow is gray. Very practical, but there may be a change that would make it even more manageable...

            Is there a single shortcut which will do either, depending on the darkness of the arrow?
  

  I went through the documentation and it's probably not there. But I found a few things that do not exist (command - click here to open a link in a new tab and in the background is very convenient), so I thought I'd ask.

  -Gil

  I'm not aware of an extension to get this behavior.

  You can open all links in a new tab.
  Then you just close the tabs and do not use the back button.

  You can open links in a new window.
  Then the closure of the last tab in a window closes this window if you have not changed this setting.

• Local database not accessible from the console of the enterprize Manager

  Hi all.. I have a strange problem, please help
  
  I have installed hv oracle 9i on my pc. It is related to a db server and a local database (for scott schema) is also installed on the pc. with console of oracle enterprise manager, I was and want to access the two databasses. (db server and local)
  I can access the database server of db as sys: attributes are...
  
  Host: 10.4.34.59
  Port: 1526
  SID: grid59
  
  attributes for local db
  ---------------------
  Host: e5687g7665
  Port: 1523
  SID: ora123
  
  the two dbs are accessible from sql plus, but when I write scott, tiger on the console, it says 'no listener'... on the net manager oracle I HAV already added the address for pc local db.
  Thanks in advance, please help

  Hello
  It's very strange, using tnsping you get the listener, so I don't understand why sqlplus returns 'no listener '.
  You have run the tnsping and sqlplus from the same computer and same ORACLE_HOME, right?
  You have several installed Oracle customers?

  Liron Amitzi
  Consultant senior s/n
  [www.dbsnaps.com]
  [www.orbiumsoftware.com]

• Signatures - cannot have .jpg and text; Why not?

  I just downloaded 38.0.1

  Please don't tell me this - it does not solve my problem. https://support.Mozilla.org/en-us/KB/signatures

  I want this: http://www.freisco.com/zig2015.htm
  I created the file using FrontPage2000 as a html editor and posted online. Files and photos are in the same directory on my laptop. Files and photos also reside in the same directory on Freisco.com.

  After passing through ACCOUNT - TOOLS SETTINGS options Signature text (using html) and attach the signature of a file options; the results of best (and only) I realize is a box/photos with no photo with desired 4 lines of text under. I'm particularly angry at the "file attachment" I can specify the path to C:\ and he is not taking the photo. and when I try to use the http://www. path, it does not work either? More specifically, when I specify the path of http://www.freisco.com/zig2015.htm TOOLS to close then reopen the tools accounts settings; the http data are gone and the most recent C. ------is in its place. Frankly, I do not why - but it is just an issue.

  Whereas that, no matter which option I choose; the html editor (with the contents of zig2015.htm glued directly on the box) or a file attachment. It seems that I can not just to nail a picture of me in the signature; but it always captures the 4 lines of text.

  What I am doing wrong? An email would be very welcome at [email protected].

  Thank you.

  Thanks for all the criticism of what I should use vs that I shouldn't use although I didn't ask for a little of that. Rather than trying to show that you know everything about Web pages, html editors, the photo, bloat, sizes of signature and similar articles; Why don't focus you on just trying to help someone solve their problem?
  I continued to search the forums for an answer, and believe it or not, you had offered a couple of months.

  Here is the solution. Tools-Account Settings: remove all the signature options, uncheck all the boxes and all paths of code and files. Close tools.

  Go to 'write' and open a new email for the construction, which will be completely blank. Write lines of text in the desired signature. Go to the INSERT picture menu and select the photo of your choice. Be sure to include an alternative text. Click OK.

  Then select FILE-SAVE AS - and save them in a file; not a model or a project.

  Then, go to TOOLS - ACCOUNT SETTINGS, select "Attach a file signature" box and will find the file you have just to register and use this file. Click OK.

  Problem solved!

  It is a direct solution, without judgment, to my problem. When I need ADVICE I'll ask for it; When I ask explicitly for a SOLUTION, this is what I want.

• Why you put "Open a new tab" on the right side of the browser, when you close a tab on the left and you type a new URL in the browser on the left?

  I changed my computer from XP to Windows 7 and migrated my FF browsers. But... now the tabs at the top of the page are all right (they were upper-front left - where I loved her)

  The most important is the "open a new tab" + - is on the right. But that is not sensible. Why you put "Open a new tab" on the extreme right of the browser, when you close a tab on the left and you type a new URL in the browser on the left?

  How can I put my "open a new tab" immediately to the right of 'Close tab' - as if it was before?

  Please advise?

  Try clicking on "Restore default settings" in the palette to customize to reset the toolbar customization.

  • Firefox '3-bar' menu button > customize
  • View > toolbars > customize
  • https://support.Mozilla.org/KB/customize-Firefox-controls-buttons-and-toolbars

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB