Local database not accessible from the console of the enterprize Manager

Similar Questions

• New virtual local network not accessible from the vpn

  Cisco ASA 5510 helps static routes.  I created a new vlan internal and added the path correct for the ASA.  Internally the vlan is fully accessible, but when I connect to the VPN I can't communicate with the systems in this regard.

  The access policy dynamics and associated ACLs are fine. A system related to this policy, but not on the new VLAN is accessible through this policy.

  What Miss me?

  Hello

  Please let us know what kind of tunnel are you talking about:

  1 lan to lan tunnel

  2. site of tunnel site

  You must ensure that the new VLAN is part of the interesting traffic and nat is free.

  Add the new vlan interesting traffic will ensure that the tunnel is trigged for the new VLAN.

  Do the new vlan a part of nat exemption ensures that traffic is through the tunnel and natted not routed to internet and so lost.

  Also you can check if the program and for the tunnel decaps multiply or not when you try to move traffic from the new VLAN. You can check which form the "sh cry counterpart his ips."

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered, if you feel that your query is resolved. Note the useful messages.

• Capsule of the airport is not accessible from the internet

  Capsule of the airport is not accessible from the internet

  He could be reached at any time and has now stopped working?

  How have you tried?

  Three common methods... that you use?

  Airport drive - remote (3 methods)

• (writable) storage space that is not accessible from the BB or via the desktop file Explorer to

  Hello

  I have a html file that are uploaded after the application starts. I would use the browserfield to view these html pages.

  Help I need is;

  • Is there an internal writable directory where I can store my html files and access it from browserfield, at the same time, it should not be accessible from the file Explorer.
  • How to read the files here using fileconnection
  • What should I write in browserField.requestContent("???");

  Html files must be not accessible because they have some logic that I do not want to expose to the end user.

  Many thanks in advance,

  Godwin

  BB OS is much older. If you want to work with the use of the modern system of BB10

  as I said, if you need files in writing you will need to use encryption.

• FOJ 8500 909 g will not fully install, not accessible from the computers in home wireless network

  I bought an Officejet Pro 8500 909 g which worked well on our home network for 18 months.  Desktop is 32-bit Windows 7 with a USB cable.  Two wireless devices are 64-bit Windows 7.  Printer suddenly has not recognized the cartridges and frozen with the message "problem with the ink cartridge.  Called HP (unassisted) and tech support of holders of the contract of service - without help.  They sent a refurbished (even) model which I can't install on USB or wireless connection completely.  Yesterday, I was able to print at least one 3 machines on the network (not every machine wireless).  Today, I can not print even the USB device.  5 days lost uninstall then reinstall the printer software, router, etc.  Connected wireless network.  Printer says it is on the wireless network.  HP Solution center is not accessible because the "printer is not completely installed. Help?

  Hi EWQuince,

  The information you have given it seems that the printer is not on the same network as the computer. If the printer was on the same network as the computer, the IP address would be 192.168.1 instead of 192.168.33. You must run the printer Wireless Setup Wizard and make sure that you connect it to a network, the computers are connected. Once you have the printer connected to the same network all your problems should be solved.

  To connect to the wireless network

   

• How can I update iPhoto if it is not accessible from the UK store

  When I run the iPhoto application it tells me that it won't start unless I update to the latest version of the App Store. When I click on 'Upgrade' it tells me that it is not available on the App Store of UK. Has anyone found a way around this?

  Thank you.

  If you have previously bought iPhoto, it should be in your list of purchases made on the App Store. If you do not see, it may be under hidden purchases. You can try to download it from there.

  If you have not deleted your hard drive during the upgrade to OS X 10.10.3, iPhoto can be in your Applications folder.

  Also check this thread (see response to Terence Devlin) cannot be updated iPhoto 9.6 to 9.6.1 after 10.10.3 day!

• WAG320N FTP server not accessible from the internet.

  I had a problem with my WAG320N for quite awhile.

  I add a hard drive 1, 5 TB usb port and I can access to the LAN.

  Now I want to take a step further and be able to access it from the outside.

  I enabled the FTP server and Internet access.

  I was play within the parameters of safety etc. but with no luck

  Why you changed the ip address of the router to 192.168.1.2. ?

  Try to update firmware of the router. After upgrading the firmware, reset the router and re - configure from scratch. Now, simply activate the FTP server on the router and check.

• Two questions - cannot save the printer shares with the error code 0x000006d9 and part of the Machine is not accessible from the network of working groups

  I think this are problems, but here is the separately questions, first of all - the basics:

  4 PC network using the working group with two Windows 7 (ultimate) and two xp.  Everything worked fine with the a previous vista / xp 3 network.  All except the Windows 7 Desktop behave well. The network is connected with a modem cable to a 5XT netscreen NS (firewall hardware to the outside and the inside hub), a netgear wireless access point and Windows workgroup use (as mentioned above).  Name all is correct on all machines, all the discovery settings are in place and each has Norton Internet security for its local protection services. Upgrades of Windows 7 have been computer vista laptop connected wireless and wired desktop previously running XP Professional sp3.  XP conversion was assisted on the desktop of the wizard upgrade Laplink PC Mover.  Applications executed in appearance on the two level computers.

  On the desktop - I can't share printers. When I use "networks and printers" in the start menu to share on a printer I get code 0x000006d9 error saying something like the configuration cannot be saved.  All local jobs printing works well.

  On the desktop - the name of the computer records also of all as on the network (it is discovered and mapped by each PC) but when I try to access it from any other machine I get a general error says something like "check your spelling of the name mannequin." This desktop computer Win 7 can browse shared folders on the network of and write about everything.  Somewhat added data - this device can ping all others in the network sucessfully but none get a ping successfully into the offending machine either with ip address or computer name (times out waiting for a response or said the name is not found).  He himself can ping successfully.  It accesses the internet very high hand.

  Solutions have been attempted without a firewall (Firewall Norton Smart Internet - 2010), with the firewall and various changes to authorization.  A final discovery was that Windows Firewall will not allow because BFE is not able to start - error 5 - access denied (this was discovered by train to allow a possible solution because of some internet chatter that the Windows Firewall must be running to implement shared printers).  All other dependencies are running to get a break on why BFE is not (it turns on the Win 7 laptop as well as the firewall).  Authorizations have been verified in the registry for settings of firewall and BFE (ports, permits, etc.) have also been looked at with a very critical eye.  SFC has been run with no problem.  All ports for net drivers, Win 7 networking and other actions are open in the firewall.

  Then people - I did some internet research and I tried a lot of suggested solutions nothing doesn't.  My apologies in advance if a person provides a solution and I say "tried".  Any help is very appreciated

  You can mark this as resolved problem!
  The program involved, causing this error is firewall Windows, here is what you need to do to fix this...
  If like me you have disabled windows firewall, I use Security Suite of ZoneAlarm, you will need to re-enable the firewall to share the printer.

  If you have disabled or turned off the Windows Firewall. (and in my case this error was caused by exactly that)
  Step #1 - disable any other firewall can be installed. Stop to load at startup and restart your PC.

  Step #2 - go to the tools of Admin folder > Services > Windows Firewall > double click and is it set to manual or automatic and keep it.

  Step #3 - open Control Panel > system & security > Windows Firewall > enable or disable the Windows Firewall > (Enable) turn on the Windows Firewall > save
  Then go to Restore Defaults > click on restore default button > save
  (you only do this IF you have changed the settings of the firewall, but it is always a good idea and will ensure that there are no problems during the proceeding)

  Step #4 - click Control Panel Home > view devices & Printers > Select / click on your printer > screen printer properties > share > share this printer > OK

  Step #5 - go back to firewall Windows and the tower he walks back > save

  Step #6 - go back to Services > and the Manual value Windows Firewall (or turn it off if you want, I recommend the manual)

  Step #7 - reboot and re-enable your firewall preferred to start at startup > Reboot

  Step #8 - take a deep breath and sigh of relief! :)

• vmware site is not accessible from other hosts

  The host is Windows 7, and the guest is CentOS. I managed to put in

  openSSH and apache on the rise and the site is visible to the host, but I can't

  access it from outside my LAN (I have a router) or inside my local network (since one

  another computer of course). How to configure Vmware & window7 then I have

  can access my virtual server on the internet?

  If you did what I said in my reply to you the other day this subject, you should be able to access by other computers on your local network, but not in itself for WAN connections and you will need to set up your router correctly to enable connectivity on the Internet virtual computer.

  You did as I suggested and read Chapter 14 you have a knowledge of virtual networks and then bridged Network Adapter to the virtual machine value and disable auto fill in the virtual network Editor?

  If this is not the case, go back and read: Re: vmware is accessible from the host machine, but not on other computers

  BTW, in the future do not start a second thread for discussion of the matter.

• RND4210 ReadyNAS 'your NETGEAR storage space is not accessible from this computer... »

  Hi all

  First time poster here.

  My uncle died in November and he had this NAS device in his office. On the back it says RND4210 ReadyNAS but do not know what version or model or something else.

  I got to download RAIDar, but now I have done that and it detects that the NAS very well on my network, it comes up with the following message appears:

  "Your NETGEAR storage space is not accessible from this computer. Please check your network settings. »

  Any help would be appreciated.

  Everything is now resolved.

  Although it is on the same network, it took my PC to also have a wired connection. I moved closer to my hub and plugged here rather than steal my PC ethernet and putting my PC into a Wi - Fi.

• File are not accessible by the system

  There is, I had restored my computer using suite recovery of my computer.  I backup all before starting the process.  After when the process was done and I had everybody works very well, I went to remove my files of backup for the space, but I have a really stubborn file/folder.  I'm going to remove it and I get a message saying that the file is not accessible by the system.  From there, I tried going through safe mode to delete, taking possession of the records, using prompt command to remove and even using Unlocker.  None of these methods was able to remove this darn folder.  Now, I don't know what to do next.  If unlocker failed to remove the folder, then I don't think that there many options remain outside to wipe the drive.  and it's something I don't want to do.  So, I ask, what should I do next?

  Picture of the Error Message

  Photo of properties of "folders".

  Hi ShoaJo,

  Error code 14, you can see the article mentioned and check.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  I hope this helps.

• Receive the error "E: is not accessible. The file or directory is corrupted or unreadable.

  Original title: USBnot work

  Today, I inserted a USB key works perfectly in my laptop computer and got this message:

  "E: is not accessible. () The file or directory is corrupted or unreadable.

  Ideas of how this could be everything and no matter what suggestions how to fix it?

  I use an Acer laptop E1-522 (a new one that just came back from the manufacturer after warranty repairs and also had a technician called and insert a new hard drive because of problems with product key).

  I use Windows 8.1 and have used Internet explore and currently using Firefox as my browser (same questions with both browsers).

  Thanks in advance.

  Sorry, I don't remember the sequence that I used, but messages asked me to change the drive letter of the drive that I was using, so I changed it from E to F. He has not made a difference, because I always get a message "the disk is damaged or unreadable. Finally, I formatted, so I guess it should be the end of the story. I got lucky that didn't not lose all the useful data.

  Thanks for your help. I very much appreciate the way in which people help "technologically challenged" people like me.

• Site Web Server not accessible via the internet

  Hello Apple community,

  I had a problem with the.app Web sites, where my site Internet (FQDN) is accessible via the network internal, but not accessible through the internet. I have port ports 80 and 443 passed on my firewall and I can see the ports open via nmap on an external connection.

  When I browse the site via http, I get redirect to 443 then it just resets and I get no error page. Internally, the page redirects to 443 and loads fine with the popup of trust initial cert (self-signed cert) that I then store to my keychain and loading the page well. I get no this pop up via an external network.

  Accessibility is accessible by 80 (green circle icon) but not of 443 for reasons I can't understand.

  I already tried to remedy the situation of the measures:

  Create a new self-signed cert to use. (same results)

  Disable ssl and disable redirection. (causes a load error in the browser)

  Wiped the OS reinstall OS X El Capitan and.app. (same results)

  Checked the port forwarding on my firewall Meraki 15 times (looks good)

  Disabled the feature IPS of the PPE on the Meraki (same results)

  Maybe I'm just on something? I hope someone out there can help.

  Thank you!

  Well, thought about it. < bangs head >.

  ATT Uverse uses port 443 for flow towards Wireless HD receivers in the House. There is a way to change the port it uses, and I'll try and do it later and post my results in case someone else is having the same problems.

  Thinks... "Why the hell ATT would use a common port for Wireless HD? SMH.

• MY iphone6 will not return from the icloud, HELP?

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Weezy616 wrote:

  I had to replace my phone.  The new phone will not render from the icloud.  I tried several times and I even took it in the Apple store without success.

  Thanks a lot for sharing that you cannot restore icloud.

  Maybe include some details as to what happens when your restore IE. error message?

  Or that said Apple store has been without success...

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ