Why not power light flashing on the laptop in mode 'sleep' (closed monitor)?

HP G72-253NR laptop

Windows 7 64 - bi

Why seeing Flash power on notebook computer in mode 'sleep' (closed monitor) & electric connected?  It's a constant light during use.  Is it possible to fix this?  It's really embarrassing in a dark room.  Thank you.

I finally found the information through the HP Support Assistant, I needed to download.  I wish there was a way to change this as the lights, but it does not seem that you can.

Tags: Notebooks

Similar Questions

  • HP dv7-3085dx power light flashes, but the laptop does not work.

    Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

    Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

    I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

    Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

    I just want to now what is the flashing light means light? Why it does not work with the new cable?

    Thanks in advance! Sorry for my bad English...

    Emilio.

    It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

    If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

  • Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

    Original title: MY PC has CRASHED or?  Windows XP - SP3

    Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

    Hello

    Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

  • MacBook is not close its equipment after the entrance in mode 'sleep'.

    Hello dear Apple community.

    I have I have following problem. When I put (closing / or enter Standby Mode manually) my Mac mode standby, after some time he must turn off his HARD drive and everything else. But this does not happen. I just that detected a few days ago and do not understand what could cause this problem, cause still, it worked very well.

    It happens only if my Mac is charging (connected), then you can hear the HARD drive and all the coolers work, just let him once for a whole night and it continued. When it is not plugged in that it works well, as it should be, and after 30 to 50 seconds it stops all its material.

    Maybe it has something with sessions to do, but I checked some of them and did not find anything which could control the Sleep Mode, only Energy Saver...

    On my laptop: it's the MacBook Pro 15 beginning 2011.

    I hope you can help me...

    Thank you in advance!

    Best regards!

    Energy Saver preferences are actually where you could put in place.  Note that there are separate settings for when the device is plugged by report when running on the battery.  Under 'Adapter' there is an option to prevent the computer from sleep automatically when the display is off - make sure that is unchecked if you want the device to sleep.  There is also the 'siesta' function that allows the system to wake up for backups TM, messages, notifications and mail.

  • my power green LED flashes and the laptop does not start

    Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

    My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

    ankurgupta53,

    It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

  • Lenovo B590 Orange laptop power light flashing

    Hello

    Recently, I noticed that my B590 Lenovo laptop indicator light was flashing orange. I tried to restart the notebook and by ensuring that all the plugs are secure, but nothing is indeed it. That means the power light flashes average orange?

    ~ Laila

    Hello

    Just wanted to give an update on this issue, in case someone else runs into a similar situation. As I said, I'm under market entirely adapter. I found that the old ground had not been eradicated because if you go out without replacing, it leaves a gaping hole in your laptop!

    I solved the problem of blinky light orange by disconnecting the battery, but leaving so much, with little electrical tape, to hold it in place that it will protect the pins bit inside battery - thanks for the link to the manual, it is also useful.

    Mahalo,

    ~ Laila

  • Changed to Comcast modem / gateway of the infinite. Ethernet cable lights are at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to the GREEN?

    Changed the old Comcast to Comcast modem / gateway Infinity with wifi. Ethernet cable lights are lit at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to a GREEN fixed?

    Whenever you change your network hardware, it's always a good idea to carry out a new round of full power to all your devices. Check out the following Tip of an airport users for more details. Please post back your results.

  • KDL-46XBR9 shuts off and the power light flashes red

    KDL-46XBR9 shuts off and the power light flashes red

    It flashes ten times, then rehearsals.

  • Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

    My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

    * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

    Hello

    If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

    If it is under warranty, contact a local reputable computer repair workshop

  • power light flashing hp deskjet 3940, & do not print anything

    I have windows XP(SP3) on my laptop and HP printer Deskjet 3940. The printer worked fine until now. Now the power light blinks on the printer. There is NO paper jam.
    I uninstalled and reinstalled the driver from HP website. The printer showed ready in the control panel,but as soon as i try to print a document it shows offline and the power light starts blinking. I have cleared documents from the print queue.
    I have tried using different USB ports but no success.
    I have ensured that 'use printer offline" is unchecked.
    I also downloaded and ran HP Print and Scan doctor. It says everything is fine and asked me to print a test page, but nothing happened when I tried to print. Print HP EXPERTS, Please Help! Thank you!
    

    Hi HPuserSJ,

    I just wanted to check to see if the documents of resolution of problems you have been useful.

  • Qosmio F20 won't start - power light flashes orange

    My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

    I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

    I am really puzzled.

    If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
    In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

    They have manuals containing instructions and the exact description of the code how do I solve this problem.
    Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.

  • Satellite 2805-S201: AC power light flashes orange 8 times

    Hello

    I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
    After that, the AC power light flashes orange 8 times and recycle.

    It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

    Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
    No, the PCMCIA card is not always connected

    Any thoughts?

    CA

    Hello

    The flashing provides a micro code which refers to the hardware failure.
    But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
    But it is of course, in most cases, it s a hardware problem of motherboard! ;(

    Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.

  • TECRA 9100 - power light flashes and won't start system

    my laptop does not start - all I get when I push the power on button is the power LED flashes on the following sequence. S-S-S-S-L-L-L-S (S = SHORT, L = LONG)
    ANYONE KNOW WHAT THIS CODE MEANS.

    The only thing I could have done was to put a (b8 that is 12mm) screw in the network card lock switch slot on the bottom of the laptop that says MAX 4 mm.
    Any information would be appreciated to [email protected]

    Hello

    This is unfortunately no public document on the explanation of these hexadecimal codes and I can't tell you what that means exactly. The fact is that electronic power supply has detects some malfunctions and sends the code.

    Sorry, but I don't believe that you can do something alone. Try it please contact the customer Service of your country partner and explain the situation.

  • power light flashing wn3050rp

    I have a wn3050rp extension

    its power LED flashes all the time

    I installed by mistake inside wn3000rp firmware

    and since then, its power light flashes

    Help, please

    http://KB.NETGEAR.com/app/answers/detail/A_ID/22688

    see this

    It will help you

  • Power light flashes photosmart psc2410xi

    Power light blinks and the hourglass icon is exposed on PSC2410xi. Cannot print in this case.

    Made popping sound... Will not light... computer can see printer...

    OK, here is the cure. The light that makes the scanner is not lining up. There is a white bar that light up to the quadrature. Remove the top. (you will need a star screwdriver) Release the top by pressing the version with a small screwdriver in the middle square hole below and pull towards you. Clean the glass so that the reader can tell exactly where the edge is. A FULL reset by unpluging power and all pressing on # 9 plug in the power again and HOLD #9 down UNTIL SEE YOU THE RESET VIEW.

    Worked for me.

Maybe you are looking for