Why one of my flash drives open even immediately after loading KB971029?

Similar Questions

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• Why can't my Flash drive for readyboost?

  I tried a whiff of 221 mb usb flash drive so it says the size of the unit must be greater than 256 MB and then I tried a whiff of 3.5 GB usb flash drive, but he said that the device does not have the performance characteristics required for use in speeding up your system.

  ReadyBoost requires the player to have a fast enough speed read/write. Not all flash drives are fast enough.

  In some situations, you might not be able to use all of the memory on your device to speed up your computer. For example, some flash memory devices contain both slow and fast flash memory, but ReadyBoost can only use fast flash memory to speed up your computer.
  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• How to convert the DVD of Windows 7 USB Flash Drive and even install from a USB Flash drive

  My lappy dosent recognize Windows 7 Home Premium DVD. Can I burn the image to DVD on my USB Flash drive using my desktop and then install Windows 7 on my USB Flash drive lappy. If yes how?

  Yes, you can.

  the file .iso image from Microsoft for the USB/DVD tool allows you to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

  

• My flash drive is not exsisting after a successful installation, what is the problem?

  I have windows 7-64 bit
  When my computer asked me to update my flash player from adobe to the latest version 11.1.102.63 with the supplementary McAfee, something has gone wrong in the installation. The installation froze and the update never happened.

  I went to download the version myself through the pages of adobes and select and also here it froze when I got the McAfee too. I tried to do it without the McAfee and he went through, but once the installation is completed I get this message

  I tried to uninstall all Flash Player, that I could find on the computer, I restarted the computer and I tried again, but it does not always something different.

  I can see videos of youtube on youtube, but not through facebook, not based flash drive mappings or use advanced photo uploaders.
  What can I do?
  To avoid me having to ask a lot of words, try to avoid using short versions of names in your response since I was quite bad with this thing of computer language

  Thanks in advance!
  

  Click Start, type System Configuration, click System Configuration, click Selective startup, uncheck load startup items, click on apply, click the Services tab, select hide all Microsoft Services, click Disable all, click on apply, click OK, click on restart.

  After rebooting, run the Setup program.

  Click Start, type System Configuration, click System Configuration, click Normal startup, click on apply, click OK, click on restart.

• Portege R600-10 q - DVD drive open / not work after the start of Vista

  Hi all

  Its my first post here =). I just bought a new Portege R600-10 q (PPR61E) and I have a problem. The DVD player does not open / works after Vista started... it works very well, or at least opens / orange light turned on, before the page of connection, but after that nothing.

  I have done't the thing of high-low values regedit to see if it works, but still nothing.

  The device does not appear in Device Manager, so I can't remove and reinstall.
  I did all possible updates to toshiba and MS, nothing helps.

  Can someone point me in the right direction?

  Thanks in advance.

  Steve

  Hello Steve

  I don't know what you've done in the past, but I would like to know if everything works with the factory settings.
  Have you tried to install Vista using Toshiba recovery image?

• So that the eject USB Flash drives, him still lights after the ejection, unlike windows XP

  While ejecting a USB key, I could see the light still glowing im using windows 7

  While ejecting a USB key, I could see the light still glowing im using windows 7

  Hello

  Could you give more details?

  What is the light that is attached to, the USB, the computer case, or is it a light on a USB hub?

  Let us know.

  Thank you for using Windows 7 Ronnie Vernon MVP

  It looks like the LED light on the USB. I wouldn't pay too much attention to it if Windows 7 says its safe to remove the device. Make sure that there are no files or programs still in use on the USB.
  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• I have 2 flash drives dedicated to boost lending, but I only want one for ready boost.

  How do I remove Ready boost one of my flash drives so I can free up 4 GB of memory. The option of AutoPlay ready boost will not be displayed for these 2 flash drives so I can't he turn on or off. I tried to delete it in windows Explorer, but he says that this is impossible because the file is open in the system.

  Hello

  We are pleased to hear that you were able to find a solution to the question and I thank you for the information provided. Do not hesitate to contact us, in the case where you face other problems in the future.

• USB ports not recognize flash drives

  I was just given a Gateway Performance 550 windows 98-based computer. It is plug-and-play, have two USB ports. Printer and scanner included work on plug-and-play. The computer will not see even a device plugged in when you insert a flash drive. Should readers flash works with Windows 98, or should I switch to XP for the software to recognize? I read that some parts used USB 1 format and taking the computer earlier. It is supposed to be dimensionally identical to the USB 2, but run a little slow, but always interchangeable. Maybe the USB 2 flash drives are not interchangeable.

  I was just given a Gateway Performance 550 windows 98-based computer. It is plug-and-play, have two USB ports. Printer and scanner included work on plug-and-play. The computer will not see even a device plugged in when you insert a flash drive. Should readers flash works with Windows 98, or should I switch to XP for the software to recognize? I read that some parts used USB 1 format and taking the computer earlier. It is supposed to be dimensionally identical to the USB 2, but run a little slow, but always interchangeable. Maybe the USB 2 flash drives are not interchangeable.

  I'm not the best expert on all this, but I don't think that Flash drives were even invented where 98 was around.

  The 98 machine would not have the drivers for a Flash drive.

  You can visit the web site of the manufacturer of the USB and see if there are 98 compatible drivers there.

• How can I get rid of the error code 0 x 80010108? It wont let me show my flash drive images

  Whenever I put one of my flash drives in the computer to see my photos, it gives me this error code... 0 x 80010108

  Hello DoloresMullet,

  In addition to the response of Azeez N, you can see the thread below with a similar problem:

  http://windowslivehelp.com/thread.aspx?ThreadId=3dd85141-A45D-44D9-a94c-3c7d13cfcd5c

  Thank you

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• How can I copy image files from my computer to a flash drive

  I copied all my photos in the photo library & am now trying to copy the files from photo to flash player... never did before transfer... How can I do this

  Photo Gallery is just an 'intermediate '. It does NOT store images/photos.
  Images/photos are stored in the folder. Are your looking for in the pictures folder.

  Plug your USB > start > computer > click the flash drive > open folder images > drag and dropn photos images in the flash player.
  That's all.

• Trying to recover a Windows 8 compatible USB flash drive

  Can someone help me please? I think that I have a hard drive failure or a fault. It specifies the drive name: TOSHIBA MQ01ABF050 and C:\;D:\ volume. I have a HP Pavilion Sleekbook with windows 8.1 14 TS (I upgraded from the Windows 8 which came with the laptop) and I unconsciously created a recovery image on a USB compatible of Windows 8 successfully when I lived already problems with my portable hard drive. Later, I discovered that it is not recommended to create a recovery image on a USB compatible of windows 8. I hope to just get back to factory settings and wipe out all my files if it can help me my laptop in working condition I have already backed up my important documents to USB. My next question is 1.) The recovery image that I created with the usb it's 8 compatible windows won't work if I try to do a factory reset? 2.) the recovery image I created everything with the mistakes already, will be technically 'clean', which means he has everything needed for a laptop running once I replace my hard drive or perform recovery with hard flow drive up? (3.) I will be able to restore from the recovery partition? or affect the hard drive failure that animate as well? Your help would be greatly appreciated! Thanks in advance to those who can help me.

  Note: my USB flash drive is also compatible with windows 8 AND 7. Is it possible to transfer only in just a usb compatible windows 7 if I encounter problems because of the compatibility of windows 8 flash player, I used for the creation of recovery image. Thank you.

  The question of compatibility you're talking about is one where many flash drives are seen as a local instead of removable storage disk - and HP Recovery Manager wouldn't use it to create a recovery media. Since you were able to create your USB support has been recognized as compatible for use. You should be fine with recovery use.

• How to copy music from a flash drive to another on the mac pro?

  I recorded 7 songs on a flash drive directly entered a fender sound system. How to I transfer these songs to another white flash drive now. I already loaded songs on i-tunes/playlist, but my mac does not burn the usb flash drives, only the cd?

  Drag them to the desired location.

  (139611)

• Can I run Palm Desktop on a flash drive?

  I work in an organization where I work on different computers in three different locations, as well as my own laptop and desktop at home.  I can't take my laptop with me to the offices, but I wear a flash drive.  I can not load the software on work computers without incurring the wrath of the gods IT.  Can I run Palm Desktop 6.2 and hot sync to a flash drive, so I do not sync the entire batch of computers?

  ' fraid not.