why only the https addresses connect on Windows XP?

Similar Questions

• Why the Tecra M11 - 11 M got only the 32-bit version of Windows 7?

  Why the Tecra M11 - 11 M has only the 32-bit version of windows 7 and 64-bit?

  Surely the i7 and 4 gb can deal with applications and the 64-bit version would allow a more efficient use of computing power.

  Thank you very much

  Hello

  You can try the 64-bit Vista for Windows 7 64-bit driver, most of them must be compatible. I don't know why Win 7 64 bit drivers are not available, there is a user forum and nobody can answer you, I guess.

  welcome them

• When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

• I have an old computer use more, but I need to get some documents, but I don't remember the username to connect to windows

  I have an old computer use more, but I need to get some documents but I don't remember the username to connect to windows and there is no index. How can I connect

  Hi joedoerksen,

  Follow these methods.

  Method 1: Start the computer in safe mode. Built-in Administrator account would be displayed on the Welcome screen. Choose the account administrator and you should be able to boot to the desktop, if you have not set a password for the default Administrator account.

  Method 2: If you have set a password for the default Administrator account, then the only option is to go for a parallel installation of Windows XP and retrieve documents.

  Follow the method 4 install Windows XP to a new folder (parallel installation) of the article.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Method 3: Follow the steps in the article.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  See the article on the Microsoft Policy on lost or forgotten passwords.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• looking answer why only the background image is visiable in preview and publish

  looking answer why only the background image is visiable in preview and publish

  

  design                                                                                                                                                                           publish

  What is this code above the head? Appear to interfere with the rest of the code below.

  

• Use only the IP address of operation EBS

  Dear all,
  
  I have a question, can I use only the IP address of operation EBS?
  Instead of host configuration.
  
  Thanks in adv,
  Jackie

  I have a question, can I use only the IP address of operation EBS?
  Instead of host configuration.

  Non - Oracle EBS uses the hostname in all the files of configuration and IP address only is not hardcoded in the files (except in some tables). So, you must always have a good hostname. Domainname in your hosts file.

  Thank you
  Hussein

• Why is the MAC address Clone?

  When I disabled it Clone MAC address I lost access to the internet.

  Does anyone know why MAC address Clone is necessary and what it does?

  Clone MAC address changes the MAC address of the router on the internet port.

  You can use the function of the cloning MAC address to clone the MAC address of a computer if you used before your computer directly to the modem.

  Some ISPS (especially cable ISPS) only the customers to have an active internet connection at any time. To do this, check the MAC address, that is, they remember the MAC address that accessible line via the modem and lock the connection to this MAC address.

  If you test your internet connection directly with your PC first and then connect the router the router can not get an internet connection because the row is locked to the PC's MAC address. Now if clone you the address MAC from the PC on the router the router "pretended" to be PC and the ISP will accept traffic again.

  Usually, simply reset or turn on the modem to reset the lock again. Sometimes, you have to turn off the modem for a couple of hours (for example, through the night) after a few hours of inactivity the ISP removes the lock again. Sometimes call the ISP to remove the lock, but it's not very often.

  So basically, generally useless clone MAC address at all because you could accomplish the same thing by resetting the modem or it turned off for a few minutes. If you connect the router to the modem, ISP learns the MAC address of the router and it gets working internet connection. (Of course remember, that once a computer directly connected to the modem would not get active internet connection unless you change the MAC address of the computer to the MAC address of the router).

  But the function is useful if you do not want to. You simply set the MAC address of the connected device before, and you get a working internet connection.

• Is it possible to find the MAC address in Microsoft Windows computers.

  Original title: help
  its possible find in microsoft net computers IP - MAC address, and where I need to write if I run to

  Hello

  Yes, the MAC address is present in every system that connects to the Internet and runs any version of Windows.

  MAC address stands for Media Access Control (MAC address) is a unique identifier assigned to the network interfaces for communications on the physical network segment.

  To find the MAC address on Windows XP computer try the steps below.

  (a) click the start menu button in the Windows taskbar.

  (b) click 'run... '. "in this menu.

  (c) type "cmd" in the text box that appears. A command prompt window launches on the desktop.

  (d) in the command window, type ' ipconfig/all'. The details are displayed for each of the network adapters on the computer. Computers installed with the software VPN or software emulation will have one or more virtual cards.

  (e) the "IP address" field contains the IP address of the network card.

  (f) the 'physical address' field contains the MAC address of the card.

• scroll - why only the up and down arrows works sometimes, and then you must use the arrow on the right side, very annoying, thank you very much

  will have hard to scroll upwards and the arrows of downusing, to scroll, I use aeeow to scroll on the side, first release it on bar, using internet brands this task

  a real pain.  also how to use all the symbols on the keyboard, keyword, can'tget four symbols to display

  Thank you very much

  Hello

  1. What is the brand and model of the computer?
  2. In the face of this issue only when you are on the Internet?
  3. Have you made changes on the computer before this problem?

  I suggest you to check the status of the issue to keep the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  You can also refer to:

  Troubleshoot wired keyboards that do not or only the erroneous characters category.

  http://support.Microsoft.com/kb/258826

   

  Optimize Windows 7 for better performance.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

   

   

• I can see only the servers in a 'new window' or 'full screen.

  I have Windows Server 2.0 on can I Server 2008, and I can only see the servers in a 'new window' or 'full screen '. I want to select the server and have it open right in Internet Explorer without having to open a new window for each server (see screenshot). "When I select in the Console tab it tells me to ' click anywhere to open.

  I tried the things:

  -J' tried to unstall and reinstall and it works.

  -install and I tried browser Fire Fox.

  -tried the two port 8333 and 8222.

  Any ideas?

  Y at - it customer management console / I can install that does not use a browser?

  Host server Win 2008 without Hyper-V server.

  Address IP/name, enter 127.0.0.1:8333

  Enter your credentials in the user/pass fields.

  BTW. Check this - how to install 32 bit VIC on 64 bit system.

  J.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Why is the email address in the To: red when the address book AutoComplete box?

  Linux TB31.0
  Not aware of this problem in the preliminary questions!
  The problem occurs when you start typing recipient in the "To" box.
  Have 'Home Address Book"no"personal address book"no"collected addresses ".
  Should I export and rename "Home Address Book" and then import back into the "personal address book" to be recognized by the auto-completement ' to ' entry?

  Please see this bug: https://bugzilla.mozilla.org/show_bug.cgi?id=1042561

  I don't think that the bug is affected by the name of the address book, or whether or not it is the CAP.

• Why is the first tab in a window now hidden! ???

  Using Firefox 7.0.1 w / Mac OS 10.6.8 for awhile now, but suddenly I noticed that the first tab in a window becomes hidden. Then on the tab bar, I have only the + add-a-tab tab, then the 2nd added tab and beyond. I can only decipher which is the first tab by clicking on the arrow down very far to the right of the tab bar and there it is. But if I click on it, all I get is the window but still NO tab.

  This becomes critical when I am trying to organize the transfer of tabs in a different window to free up space in the first window. Now, it is simply impossible because there is no tab to enter and drag in a another window is not!

  If all goes well, there is a simple solution, but I wasn't able to find an answer yet by googleing. Thank you.

  I think it's a bug.
  
  I saw it myself too.
  
  I see it all the time if I detach a tab to open in a new window.
  
  There is only the sign more to open a new tab n open a new tab this tab to the right of this new tab opens more sign.
  
  Close tab (Cmd + W) and the restoration of the tab (Shift + Cmd + T) solves this problem for me.

• I see only the drive removable connection Journ.E to PC

  When I connect to PC, it warns 'Connect to PC' on the screen of the Tablet all the time of connection, one on PC that I am not Journ.E, but only the removable disks.

  Everything I have to transfer from the PC to the DAY. E it seems to be done, but I couldn't use it.
  The "PC connection" warning is missing only by disconnecting.

  Hello

  The removable disk that appears in my computer's card SD is inserted in the Journ.E.

  I put t know what files you moved to SD card, but you should first check for compatibility with the JournE touch device. Not all types of files are supported!

• Encoding of the Http blackBerry connection issue

  Dear,

  I have connected using the http url:

  QUrl mRequestParams = QUrl(url);
  
      QNetworkAccessManager *networkManager = new QNetworkAccessManager(this);
      QUrl requestUrl(url);
  
      QNetworkRequest request(requestUrl);
      request.setHeader(QNetworkRequest::ContentTypeHeader,
              "application/x-www-form-urlencoded");
  
      if (networkManager) {
  
          bool resFromServer = connect(networkManager,
                  SIGNAL(finished(QNetworkReply*)), this,
                  SLOT(requestFinished(QNetworkReply*)));
  
          qDebug() << "Connection is success : ? : " << resFromServer;
  
          Q_ASSERT (resFromServer);
          Q_UNUSED(resFromServer);
  
          QNetworkReply *reply = networkManager->post(request,
                  mRequestParams.encodedQuery());
          if (reply) {
              qDebug() << "Reply from server is " << reply;
          }
      }
  

     /*!
       * @brief QString object to be used to store server response
       */
      QString response;
  
      if (reply) {
          if (reply->error() == QNetworkReply::NoError) {
              int available = reply->bytesAvailable();
              if (available > 0) {
                  QByteArray buffer(reply->readAll());
                  response = QString(buffer);
              } else
                  response = "Zero bytes in response";
  
          } else {
              int httpStatus = reply->attribute(
                      QNetworkRequest::HttpStatusCodeAttribute).toInt();
              response =
                      "Error and the code is "
                              + reply->attribute(
                                      QNetworkRequest::HttpStatusCodeAttribute).toString()
                              + "  And the Error string is :: "
                              + reply->errorString() + "\n";
          }
          reply->deleteLater();
      } else {
          response = "Response comes out to be null";
      }
  
      if ((response.trimmed().isEmpty())) {
          response = "Empty Response";
      }
      qDebug() << "Response String is :: " << response << " \n";
  
      if (!response.isNull()) {
          // You got response . Do whatever you want to do with it.
          QTextCodec *codec = QTextCodec::codecForName("UTF-8");
          QByteArray encodedString = codec->fromUnicode(response);
  
          parseXml(encodedString);
      }
  

  void ListChannelModel::parseXml(QByteArray xmlByte) {
  
      /* QXmlStreamReader takes any QIODevice. */
      QXmlStreamReader xml(xmlByte);
  
      if (xml.hasError()) {
          qDebug() << "XML error: " << xml.errorString() << endl;
  
      } else {
  
          XmlDataAccess xda;
          QVariant list = xda.loadFromBuffer(xmlByte, "channels/channel");
  
          ArrayDataModel *dataModel = new ArrayDataModel();
  
          dataModel->append(list.value());
  
          emit dataLoadedSignal(dataModel);
      }
  

  After I have load data in the view of the list that I'm dealing with coding error

  check the image

  

  Can you help me?

  Have you tried to use the QString::fromUtf8 method?

• Why lose the new folder button in windows 7

  Why did you lose the new folder button in windows 7 when you try to create a new folder from a right-click on the desktop?  Y at - it an easy solution to restore this back?

  Difficulty of recording of Linda Yan is not difficult.