Why open DB with RESETLOGS option after either complete or CAMILLE with a backup control file?

Similar Questions

• I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  Did you check help-> updates to see if they are available? You probably don't have the latest version of Camera Raw that was compatible with Photoshop elements 12 installed.

• Problem with SQL * Loader control file

  Hi friends,
  
  I use the following control file.

  Load Data
  infile *
  BADFILE xx_ds_po_upload_bad_file.bad
  APPEND
  INTO TABLE xx_ds_po_upload_hdr
  when (1) = 'HDR'
  FIELDS TERMINATED BY "     "
  TRAILING NULLCOLS
       (         
           header_id "xx_ds_poupload_hdr_s.nextval"              
          ,Supplier_Number
          ,Supplier_Site_Code
          )
  INTO TABLE xx_ds_po_upload_lnr
  when (1) = 'LNR'
  FIELDS TERMINATED BY "     "
  TRAILING NULLCOLS
       (         
           header_id "xx_ds_poupload_hdr_s.currval"              
          ,Organization_code
          ,Item
          ,quantity
          ,need_by_date
          ,line_id   "xx_ds_poupload_lnr_s.nextval"  
          )

  Here is my data file

  HDR     123     001
  LNR     xxS     XX     5     05

  When I insert the data, the program ends normally but given correct will not be inserted...
  
  It is the way in which the data is inserted in the tables
  

  Header Table
  
  HEADER_ID SUPPLIER_NUMBER                SUPPLIER_S
  --------- ------------------------------ ----------
         32 123                            001

  Line table

  HEADER_ID   LINE_ID ORG ITEM                  QUANTITY NEED_BY_D
  --------- --------- --- -------------------- --------- ---------
         32     10015 05

  Of the foregoing, in the table of the line, we can see that 05 is inserted for organization_code and since we gave "TRAILING BY NULL COLUMNS" program has no error on and the other fields are NULL.
  
  Can you please why 05 is taken for organization_code when xSS should be taken according to the data files?
  
  Please advise on this
  
  Kind regards
  Anthony Alix.
  
  Published by: Anthony Alix on April 29, 2010 11:32

  A load of table multiple when one later IN THE TABLE
  clause starts the position is NOT defined at the beginning of the
  logic automatically.

  This is train how to rewrite your code to get the right result
  Load data
  ...
  IN THE TABLE xx_ds_po_upload_hdr
  When (1) = 'HDR '.
  ...
  IN THE TABLE xx_ds_po_upload_lnr
  When (1) = 'LNR.
  ...
  header_id POSITION (1) "xx_ds_poupload_hdr_s.currval".
  Organization_code
  ...

• Motorcycle G, why open the phone/call options on the home page

  After the last update, when I unlock the phone with PIN to use, the option call/contacts page opens up instead of the home screen... is it possible to change this?

  Thank you

  Looking on google for information, I found a forum someone who had the same problem with a 5 link, one of the possible causes are the gestures of the phone.

  When you try to unlock the phone, maybe drag right at a time given?

  http://Android.StackExchange.com/questions/75940/Android-l-preview-after-device-unlock-contacts-app-open

  Swipe the top = unlock normally

  Blow low = notifications

  Right = contacts

  Swipe left = camera

  https://youtu.be/pEDQ1z1-PvU?t=81

  NOTE: I have found very little information about this

• Almost every program I try to run asks me what program I want to open it with. Internet Explorer files using a calculator.

  So yes, as the title says, I can't any program to be run, I can't even look at my system to try to update the driver. I tried to download some programs to solve this problem of diver updates to the registry scan fix everything on the windows site and I'll try to run the program, but still he asks me what I want to open the program with. Internet Explorer is just about the only program I can get it to work. I can't even program my system restore to run, that asking too me to choose a program I want to open the file with. I don't know what to do. I was able to run my Norton Virus scans, analyses of registry, anything and everything that Norton 360 can do, I did it and nothing works. So please if you have any solution send them my way!

  So yes, I could find a site that fixed my problems that it was. http://www.dougknox.com/XP/file_assoc.htm

  so if someone else is having the same problems I was, go to this link and find the fix .exe and BOOM you guessed it.

• Creating a new controlfile with RMAN backup data files

  Hello
  
  I use oracle 10g (10.2.0.1) in RHEL5 server. I am trying to restore a RMAN backup from one server to another server again with the new name of the comic. I took on the RMAN backup spfile and created her pfile and edited the file pfile with new dbname and directory structure and launched the db in nomount with new pfile. Today I restored the backup controfile RMAN has tried to put the database in State of Mount. But it failed due to the error below
  
  RMAN-03002: failure of alter db command at 21:44:56 05/11/2012
  ORA-01103: name "ORADB" in the control of the database file is not 'DEVDB '.
  
  So I stop the database and started the db in nomount with new pfile and tried to create the controlfile with new db name, but he didn't like it is looking for the data files.
  
  ORA-01503: CREATE CONTROLFILE failed
  ORA-01565: error in file identification
  ' / u01/app/oracle/oradata/DEVDB/datafile/o1_mf_system_80jq0kfw_.dbf'
  ORA-27037: unable to get file status
  Linux error: 2: no such file or directory
  Additional information: 3
  
  All my data files in my RMAN backup. How to get the data files of RMAN backup in the above scenario?
  
  Kind regards
  007

  restaurer restore as ORADB, then rename the database with DBNEWID
  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/dbnewid.htm

  or use duplicate instead of restore

• Open resetlogs does not work when creating clone db with online backup

  Hi all
  
  I am trying to create a clone database using a database hot backup.
  
  STEPS I FOLLOWED
  ------------------------------------
  
  LET-> CURRENT_DB NAME = DEV
  DATABASE NAME = DEVCLONE CLONE
  
  FORM DEV DB steps
  -----------------------------------------------
  -put the database in backup mode using 'alter database begin backup'
  -Copy all data files to a different folder
  -for the copy, I carried a few operations on the DB (creating users, tables, LMD etc...)
  -between the copy, I did also order journal
  -at the end of the copy, "alter database end backup.
  -created a backup control file in a human-readable format (alter database backup controlfile to trace under...)
  
  
  steps to clone side DB ((DEVCLONE)
  -------------------------------------------------------------------
  -created a setting for the database file.
  -changed the backup control file, so that it indicates the location of the datafiles copied destination
  -set the ORACLE_SID
  - then "sqlplus / as sysdba"
  -starup nomount
  -Run the file updated control (created a control file for database clone)
  -recover the database using 'recover database using backup controlfile'
  I have provided the files to archive that he was asking for (the archive that has been generated in DEV DB logs)
  then I cancelled the recovery by typing 'Cancel '.
  -recover database using backup controlfile until cancel;
  then typed "Cancel".
  -then try to open the database with resetlogs open but it showed error below
  
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01195: online backup of file 1 needs a recovery more match
  ORA-01110: data file 1: ' D:\DATA_GUARD\DEVHOT\SYSTEM01. DBF'
  
  Please help me on this...
  
  Thank you

  When the database is in BACKUP mode, it is still actively updated, only the data file headers are frozen.
  The data files are all "blurred".
  To resynchronize the, you can all do it again that was generated during the BACKUP mode - so the generated archivelogs while in BACKUP mode at least the first captured archivelog BACKUP of the END (and release of the datafile headers) is required.

  Hemant K Collette

• switch after the hot backup log file

  Hello world
  Why should we change log file after the end of the backup command that is to say, after the end of the backup hot?
  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  If you're doing a cold backup, this is where you use cp.

  But when the database is in place, controlfile is used and it is continuing to change the oracle process. Now the question is how to get the consistent image of the controlfile, here's where you their support at the database level (for example backup controlfile). When you do that level database, a snapshot file is created time and she is saved.

  HTH

• Download a file should implement an option to open the file or save it - for some reason any now just downloading it straight to the download folder. Why? Problem with Firefox or something else?

  Download a file would normally bring up an option to open the file with the appropriate program or save it - for some reason any now just downloading it straight to the download folder. Why? Problem with Firefox or something else? It is very frustrating - sometimes, you want the first opened file so it can be discarded or stored in a different location.

  Find the type of file in the Firefox -> Options -> Applications Panel, open its menu drop-down and select 'ask '. To reset all the actions of download, delete the mimeTypes.rdf file in your Firefox profile folder (or rename the mimeTypes.rdf X if you want to save as a backup). The file will be regenerated with all types of files, restore the default actions.

  For more information, see application Panel - set how Firefox handles different file types and change what Firefox does when you click on or download a file .

• Why Acrobat Pro DC hangs up after that Create begins to open the source Word file?

  Why Acrobat Pro DC hangs up after that Create begins to open the source Word file?

  I tried. He created a satisfactory smaller file. After discussion with a colleague, I suspect that the file is too big for my laptop to face. My solution is to go to a specialist agency to do the work. I'm happy to close the investigation.

  Sent from my iPad

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with option to order and reconstruction, and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.

  What version of Mac OS X are you running?

• Why cannot open itunes with windows 10

  Why cannot open iTunes with windows 10

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. (Yes, I see that you've done that but maybe not the specific deletions which are mentioned).

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  See also install missing components in case the installation of a component at a time is successful.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. At the opening of th

  I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. When you open the zip files at this other app asked me if I wanted to extract zip files in a new folder, I have accepted, in both files .js (javascript) files there. I opened these .js inside this same application files and content files white text on black background and that seems to be a script file. My question is: my iPad Air has been compromised by a scam of viruses, such as the Trojan horse thieves and banking password especially as Dridex or Dyreza, the Trojans and ransomware as Locky, cryptolocker, or Teslacrypt. If that were the case, then what is the solution to get rid of these... Thank you.

  Simply delete them. It is not possible to install anything on iOS using this method. For good measure, you can remove and reinstall the application allowing you to open it with, but I don't really have that is actually needed.

• Why can't I open websites with awin1 in the address bar?

  original title: awin1

  Why can't I open websites with awin1 in the address bar?

  Hi DIANAWATTS,
   
  -Do you want to open the Web site that you mentioned?
  -What is the browser you are using? If it's Internet Explorer you are using, what version of IE are you using?
   
  If you are facing this problem with Internet Explorer 8, try the steps listed in this article:

  Some sites Web may not behave as expected in Internet Explorer