Why person do I have help I have problem with my I phone wifi. And my phone only 7 days since I bought it why don't help people of Iraq it is only because I am of Iraq
Hello
I have a problem with my I phone 6 s / 64g / I bought the last week / my wifi has a problem it is disconnect automatically I had the same problem with my old phone I 6 / 64g help me please
Thank you
Take a look at this Apple Support article:
https://support.Apple.com/en-us/HT204051
Reset your network settings.
Settings - general - reset - reset the network settings
Reset your device. This will not erase your data stored on the phone.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
Tags: iPhone
Similar Questions
-
I have problem with my iphone 5 has no 4g 3g only. in Sweden in the works of 4g Malmö... can someone help me please...
Where did you buy this phone? 4G has already worked on this phone? Whatever the carrier said when contacting you? Have what troubleshooting you tried?
-
I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:
"Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »
So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."
After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »
However, no matter how long it works, it never gets past "Setup initialization."... »
So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.
So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.
So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.
Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.
In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?
Try the sfc scan:
http://support.Microsoft.com/kb/936212If not, repair of Vista:
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html -
Hello
Problem: when I put my computer to sleep, wake up, there is a noticeable delay in performance. Internet is slow to reconnect, and GUI is unresponsive. This occurs for about 10-15 seconds, and then things come back to life.
What I tried:
I opened the console, and I copied the report. I found a few warnings, which I post some (in failure).
core of the host [0]: CoreStorageGroup::completeIORequest - 0xe00002ca error detected for LVG 'Macintosh HD' (4F6A789B-E1E1-458F-908A-844CDFA246CB), pv 31458C 06-C725-4647-A817-A8C8461D59A2, near LV byte offset = 242813976576.
LHOST kernel [0]: disk1: i/o error.
LHOST kernel [0]: sandbox: launchd (1) political system: deny (1) - flags-writing files/private/var/run/dyld_shared_cache_x86_64
LHOST kernel [0]: sandbox: launchd (1) political system: deny (1) file-writing-break the/private/var/run/dyld_shared_cache_x86_64 link
LHOST com.apple.xpc.launchd [1] (com.apple.backupd.status.xpc): HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.
LHOST com.apple.xpc.launchd [1] (com.apple.cmio.AVCAssistant): ThrottleInterval zero value. You are not so important. Ignorant.
com Apple.XPC.launchd [1] (com.apple.trustd.agent): ServiceIPC the key is no longer respected. Please delete.
LHOST com.apple.xpc.launchd [1] (com.apple.bsd.dirhelper): the TimeOut key is no longer respected. He never did anything anyway.
com Apple.XPC.launchd [1] (com.apple.ZoomWindow.running): HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.
WindowServer [175]: found 13 display modes 0 x 00000000 [13: 0]
Also, I restarted in safe mode. The problem persists in the newspaper.
I created a copy of the computer to restart open log normal startup mode and secure boot mode. Then, I created three files containing - text save messages only in regular boot mode, log in startup mode messages safe and save messages in BOTH.
Save Messages that appear only in the regular boot
https://www.dropbox.com/s/up6nkk95768xcrb/onlyinnotnsafe.txt?DL=0
Save Messages that appear only in the secure boot
https://www.dropbox.com/s/80w2od220asx7e9/onlyinsafe.txt?DL=0
Save Messages that appear in trunk too of COURSE and regular
https://www.dropbox.com/s/zoifq5r4inihjaz/overlap.txt?DL=0
Can someone help me? Should I think about buying a new HD?
Also noticed - when I have headphones or whatever it is connected to the phone jacks, iTunes spontaneously opens. In addition, in the log messages
Thank you!!
Run disk utility. It is located in/Applications/Utiliites
With open disk utility select the disk to boot on the left then click the first aid tab, then click: run
-
Have problems with the IPSec VPN Client and several target networks
I use an ASA 5520 8.2 (4) running.
My goal is to get a VPN client to access more than one network within the network, for example, I need VPN client IPSec and power establish tcp connections on servers to 192.168.210.x and 10.21.9.x and 10.21.3.x
I think I'm close to having this resolved, but seems to have a routing problem. Which I think is relevant include:
Net1: 192.168.210.0/32
NET2: 10.21.0.0/16
NET2 has several subnets defined VIRTUAL local network:
DeviceManagement (vlan91): 10.21.9.0/32
Servers (vlan31): 10.21.3.0/32
# See the road
Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP
D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone
N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2
E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP
i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone
* - candidate by default, U - static route by user, o - ODR
P periodical downloaded static route
Gateway of last resort is x.x.x.x network 0.0.0.0
C 192.168.210.0 255.255.255.0 is directly connected to the inside
C 216.185.85.92 255.255.255.252 is directly connected to the outside of the
C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement
C 10.21.3.0 255.255.255.0 is directly connected, servers
S * 0.0.0.0 0.0.0.0 [1/0] via x.x.x.x, outdoor
I can communicate freely between all networks from the inside.
interface GigabitEthernet0/0
Description * INTERNAL NETWORK *.
Speed 1000
full duplex
nameif inside
security-level 100
IP 192.168.210.1 255.255.255.0
OSPF hello-interval 2
OSPF dead-interval 7
!
interface Redundant1.31
VLAN 31
nameif servers
security-level 100
IP 10.21.3.1 255.255.255.0
!
interface Redundant1.91
VLAN 91
nameif DeviceManagement
security-level 100
IP 10.21.9.1 255.255.255.0
permit same-security-traffic inter-interface
NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0
IP local pool vpnpool 172.31.255.1 - 172.31.255.254 mask 255.255.255.0
Overall 101 (external) interface
NAT (inside) 0-list of access NO_NAT
NAT (inside) 101 192.168.210.0 255.255.255.0
NAT (servers) 101 10.21.3.0 255.255.255.0
NAT (DeviceManagement) 101 10.21.9.0 255.255.255.0
static (inside, DeviceManagement) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
static (inside, servers) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
static (servers, upside down) 10.21.3.0 10.21.3.0 netmask 255.255.255.0
static (DeviceManagement, upside down) 10.21.9.0 10.21.9.0 netmask 255.255.255.0
access list IN LAN extended permitted tcp 192.168.210.0 255.255.255.0 any
access list IN LAN extended permit udp 192.168.210.0 255.255.255.0 any
LAN-IN scope ip 192.168.210.0 access list allow 255.255.255.0 any
LAN-IN extended access list allow icmp 192.168.210.0 255.255.255.0 any
access list IN LAN extended permitted tcp 10.21.0.0 255.255.0.0 any
access list IN LAN extended permitted udp 10.21.0.0 255.255.0.0 any
LAN-IN scope 10.21.0.0 ip access list allow 255.255.0.0 any
LAN-IN extended access list allow icmp 10.21.0.0 255.255.0.0 any
standard access list permits 192.168.210.0 SPLIT-TUNNEL 255.255.255.0
standard access list permits 10.21.0.0 SPLIT-TUNNEL 255.255.0.0
group-access LAN-IN in the interface inside
internal VPNUSERS group policy
attributes of the VPNUSERS group policy
value of server DNS 216.185.64.6
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value of SPLIT TUNNEL
field default value internal - Network.com
type VPNUSERS tunnel-group remote access
tunnel-group VPNUSERS General attributes
address vpnpool pool
strategy-group-by default VPNUSERS
tunnel-group VPNUSERS ipsec-attributes
pre-shared key *.
When a user establishes a VPN connection, their local routing tables have routes through the tunnel to the 10.21.0.0/16 and the 192.168.210.0/32.
They are only able to communicate with the network 192.168.210.0/32, however.
I tried to add the following, but it does not help:
router ospf 1000
router ID - 192.168.210.1
Network 10.21.0.0 255.255.0.0 area 1
network 192.168.210.0 255.255.255.252 area 0
area 1
Can anyone help me please with this problem? There could be a bunch of superfluous things here, and if you could show me, too, I'd be very happy. If you need more information on the config, I'll be happy to provide.
Hello Kenneth,
Based on the appliance's routing table, I can see the following
C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement
C 10.21.3.0 255.255.255.0 is directly connected, servers
C 192.168.210.0 255.255.255.0 is directly connected to the inside
And you try to connect to the 3 of them.
Politics of Split tunnel is very good, the VPN configuration is fine
The problem is here
NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0
NAT (inside) 0-list of access NO_NAT
Dude, you point to just inside interface and 2 other subnets are on the device management interface and the interface of servers... That is the question
Now how to solve
NO_NAT ip 192.168.210.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0
no access list NO_NAT extended permits all ip 172.31.255.0 255.255.255.0
NO_NAT_SERVERS ip 10.21.3.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0
NAT (SERVERS) 0 ACCESS-LIST NO_NAT_SERVERS
Permit access-list no.-NAT_DEVICEMANAGMENT ip 10.21.9.0 255.255.255.0 172.31.255.0 255.255.255.0
NAT (deviceManagment) 0-no.-NAT_DEVICEMANAGMENT access list
Any other questions... Sure... Be sure to note all my answers.
Julio
-
Microsoft uses independent companies for phone users to offer sort the problems that we are not informed by phone, or is - this another scam?
Scam.
See here: -.
http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft
-
Original title: expansion of the e-mail.
I used scrpnt for a page to a friend and then he sent an email and she said that she could not read, so I looked into this area and shes right, is possible for an enlarged image of a full page by e-mail... (text document
Hi Charles,
Thanks for sharing this information with us.
I am happy to know that the problem is solved, this will help other members of the community to the same question.
Please do not hesitate to visit our Web site for any help with Windows Operating System.
-
I have problems with the links and footer
I have problems with hypertext links (they sparkle and also highlight other text on the page) and also the footer space for always lights in site preview mode, even though I did little master and home page and the following pages. This happened only after I loaded a file of MUSE in the current version of Muse CC put running up-to-date on the imported file to Muse. Please help me Adobe Community.
Once you have opened the file 2014.3 muse you will not be able to open it in a previous version anyway. In order to keep the updated version.
In this version, Yes, Muse will run an optimization when you open a site. My suggestion is that optimization is made to save the file, so it doesn't have to do it again. I am convinced that a full download should solve your problem. I had a few sites that I need to do a full download myself and all is well.
-
I have problem with wifi iphone 6 s not connected...
I have problem with iphone 6s more wifi not connected...
I'm having the same problem and tried all the fixes I found online and nothing has worked so far.
-
Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?
This was never resolved? I have the same problem with an iphone 6s. It is only my phone like an ipod playback. I don't get the interface of Pandora.
-
I have problem with value NULL when the use CASE statement please help this question
I have problem with value NULL when the use CASE statement please help this question
Table: digital_val
SNO cl C2
1 San1 11
2 22 San2
Actual result: expected to A B
A B 11 22
11 NULL
22 NULL
query:
Select case when c1 = "san1" then c2,.
case If c1 = "san2" then c2 B
of digital_val
I'm more curious why, when you select 2 rows, you expect a result of row?
WITH digital_val
AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)
UNION ALL
2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)
SELECT CASE WHEN c1 is "San1" THEN END AS A c2.
CASE WHEN c1 = "San2" THEN END AS B c2
OF digital_val;
With no other input, if you select 2 rows, you get 2 rows. One of the other solutions use a max function, but is this really what you want, does not specify?
-
I have problem with my lphone6s when I want to download or go online or on wifi error come (code 1009) Please help I don't know what to do?
1009 error means that you are trying to download on the app store in a
country other than the one you are located in or from one another AppStore
that you have an account. That error can also mean that you
are in a country that is blocked.
In which country are you physically located? In which country is youriTunes account? Which store AppStore/iTunes to the country you are
try to download from? What VPN do you use?
-
I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?
Hi kikikilala,
Please explain the problem you are oriented connect Gmail with Lightroom
Try reauthorizing your Gmail account once in Lightroom and see if that helps.
Refer to Validation of Gmail failure
Kind regards
Assani
-
Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?
Hello
I would ask you go through the next thread once and see if that fixes the problem.
Error 2148073513 when you try to digitally sign Acrobat 11 standard
Concerning
Sukrit diallo
-
I have problem with my account. I did uptade my assinature to 27/08/2015 and my photoshop is blocked, because the date for uptade is with 22/09/2015. I need urgently. What do I do? Thank you
Hi Camila,
You will need to contact support by calling/chat for this request.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
Kind regards
Sheena
Maybe you are looking for
-
keyboard Bluetooth iPad Air drains the battery
I have an Ipad Air and when I connected it to a bluetooth keyboard, the battery very quickly becomes empty and even is he is plugged in and the charge of the day to the next, it does not load. The use of the battery is the home screen containing all
-
Flash drive not recognizing USB - c
I just bought the new macbook 12 inches with the retina. I am very satisfied, but I'm having some trouble with two flash drives that I bought on Amazon. Sometimes, they recognize and sometimes they are not then I reboot and they work fine. What is ha
-
Noise problem Canvio 3.0 Basics
Hello I bought a Basics Canvio 3.0 500GB 2.5 "external hard drive 2 weeks ago, and when the work, it is really noisy. For this, a half twist followed by a click over and over again. I have a Western Digital drive that is silent when you perform the s
-
Impossible to uninstall Nero kwik media
I'm unable to uninstall all the programs Nero, such as Kwik Media and the Ask toolbar
-
Compatibility Windows 7 for ATI * ES1000
Hi, I use a motherboard Intel S5000VSA which hosts an integrated graphics ATI * ES1000. I thought moving to Windows 7 Ultimate de Linux. Since I was Linux, Upgrade Advisor can not help. The Compatibility Center has no reference to the graphic card me