Why sql sever database design is used for essbas?

Similar Questions

• How to choose a database schema to use for a file of sequence?

  I have several database schemas on my TestStand system, and when I select a movie file that I need to position the schema for the results entered into the database correctly.
  I use a SequenceFileCallback for DatabaseOptions in my file of sequence and in that, I set Parameters.DatabaseOptions.DatabaseSchema.Name = 'xyz', where xyz is the name of database schema to be used. It does not, and it reports an error that it cannot be loaded or the file is maybe damaged. This feature works, or should I just a mistake in what I put this equal to?

  Evan... It turns out that your last point: 'Make sure you use quotation marks around the name of schema, no simple markings as in your message.', has solved the problem. Funny it did not report a single error with the brands. Thanks for the quick response! PLF

• Why the battery fully charged but used for 5 minutes will be disabled it?

  Hello

  In fact I use iPad Air for 2 and a half years, but already had battery problem.i went to the premium Center in Penang service ask about it. Just give them the answer because the warranty is already so just may 1 to 1 change but must load RM1300 to change. Some can no longer repair. I feel unworthy because even if I bought the Sony Xperia Acro S used more than iPad but still better than the iPad battery. All my friends said that rarely face this kind of problem. How I'm going to support again once because of battery problem can't fix, and change must pay for the new ipad.

  Hello

  Because the warranty is over, you can buy one off replacement warranty

  But you have to pay part of the cost.

  You must make an appointment on apple store.

  See you soon

  Brian

• Why this flash drive cannot be used for loan boost in windows 7?

  I have a flash drive 8 GB Kingston which is useless, but functional. I decided to use it to boost lending. So, when I go to ready boost in windows 7, it says this drive cannot be used as ready boost I've tried several times but the same answer. When I try to use it as ready boost preview of consumer windows it says OK. I have set up as ready boost. I also format and then try but same answer in windows 7. How can I use this disk as ready boost in windows 7?

  Sometimes the reader is not fast enough for Readyboost. BTW: How much memory you have in your PC? You can even no need for ReadyBoost.

  But, to force Windows to use ReadyBoost (even with a slow flash drive): http://www.mstechpages.com/2010/10/12/force-readyboost-on-a-usb-device/

• Examples of pl/sql code that can be used in training for new developers

  Hello

  I'm working on a training ride on the pl/sql to some developers who are totally new to PL/SQL. Although they are experienced in another language. I have power point on pl/sql presentations, but they especially the theory oriented with just a few examples. I'm looking for more help to have a few example pl/sql that can be given to interns as the code for example and also to practice. It should be a bit detailed and like to print the odd numbers or print "hellp world." Can anyone help to suggest if there is an example of code that is a bit detailed with a kind of complex problem which will give students a hands good example? I see a nice example at this link: http://tucano.tucanowebdesign.com/oracle/tutorial5.html - on an inventory system. It gives the feeling of being one on the issue of real-world work. So that if anyone knows of some other example say about 150 t0 300 lines or so of the code, I'll be grateful if it is shared.

  Thank you

  OrauserN

  That said, I feel again (my perception) that more code a person writing/comments the better he gets. So, I want students to examine several code examples. I guess I need to see some books to bring out some really long piece of PL/SQL - like case studies.

  . . .
  But these guys are too busy and so I try to find the net / books some really detailed examples.

  But you seem to be overlooking that PL/SQL is supposed to be used for: PL means "procedural language.

  So, PL/SQL must be used to 'procedure' treatment; This is typically several process steps. For example, when you want to run three applications as a "TRANSACTION". If all three completed successfully you COMMIT and if any of the three you don't ROLLBACK.

  You can do this by using SQL only. And a developer doesn't have to write the code until they have a technical requirements doc that explains what problem the code is supposed to solve and the constraints and requirements that the code must implement.

  So, my suggestion is the following:

  1. identify and teach the types of issues that PL/SQL is used to help solve. Multi-step transactions, I mentioned above is an example

  2. use the documentation and the code of your own organization in the form of samples. These 'guy' is perhaps too busy, but they should be able to provide to you all the documents for the code they wrote and that you use which would be good to use as examples. If they have no documents technical requirements so you just identify a MAJOR gap in the operations of your org that you must bring to the attention of management.

  3. you can provide value added a lot more if you use code from your own org as a basis for what you are doing. A very useful training exercise is to ask students to perform 'code review' of a code (a procedure or function) and write simple comments, one line that explain, in plain English, what makes each piece of code.

  4 comments, students create to step #3 can actually be incorporated into your code then existing so that future developers can use these comments to understand what the code actually does.

  5 part of your 'education' should be on the way to 'test' correctly a piece of code PL/SQL to make sure it is doing what it is supposed to do. Again, if your students actually your own org code allows to create tests, these tests can then be added as a result of 'test' for this application and that adds value. A lot of times those developers 'busy' will not create the actual test cases and that your students can help remedy that. In addition, it does no good to know how to write PL/SQL code if you don't know how to test properly.

• How can I fix the damaged file sql server database ME?

  Standby my mdf file got damage due to unknown reasons then I used the command dbcc chekcdb but it failed, file MDF is important to me, I don't ' know how to recover data from the mdf file. Please anyone suggest me?

  You are looking for a good solution recover a damaged repair Toolbox for SQL Server database, and then use the SQL recovery tool is an efficient MDF file recovery solution that allows the user to repair and recover a database corrupted in just a few minutes. Learn more https://www.repairtoolbox.com/sqlserverrepair.html

• Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical users to end dry change

  Am about to buy DW.  2 quick questions before proceeding.  (1) can I associate a DW created an EXTERNAL SQL Express database for the read/write site?  Can be made safe?  (2) am plans to use Contribute to allow non-technical end users EASILY change the sections of the web site.  Can this work?  Thank you.

  I would like some ideas.

  A CMS is the standard solution in the industry today. The most common environment is LAMP (LINUX, Apache, MySQL, PHP).

  Some of us to write custom CMS systems for a living. I concentrate on CMS for retirement centers. There are all kinds of solutions CMS available ranging from generalist, off-the-shelf CMS like WordPress, completely custom, with a lot of opportunities in the meantime.

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• How to COPY a BACKUP as the... CONTROLFILE can be used for the OPEN database

  I create a document such as a "How To" to move a position for a Junior DBA controlfile.

  But it seems that I'm the Junior because I am facing the following...

  Action plan:

  Move/rename a Controlfile

  Version of the database: 11.2.0.3

  Controlfiles moving of:

  / goldengate/ORCL/ORADATA /.

  TO:

  / GoldenGate/ORCL/controlfile

  Step 1: Set up environment variables

  $> export ORACLE_SID = ORCL1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $> echo $ORACLE_SID ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORCL1 $> export ORACLE_BASE = / u01/app/oracle ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $> echo $ORACLE_BASE ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- / u01/app/Oracle $> export ORACLE_HOME=$ORACLE_BASE/product/11.2.0.3/dbhome_1 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  $ echo $ORACLE_HOME

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  /U01/app/Oracle/product/11.2.0.3/dbhome_1

  Step 2: Check control_files parameter

  $> echo "see THE PARAMETER control_files | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- VALUE OF TYPE NAME ------------------------------------ ----------- ------------------------------ control_files string/goldengate/ORCL/ORADATA/control ol01. CTL, / goldengate/ORCL/ORA DATA/control02.ctl

  Step 3: Closing the open database

  $> echo 'SHUTDOWN IMMEDIATE'; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The database is closed. The database is dismounted. ORACLE instance stops.

  Step 4: Editing of the database

  $> echo "STARTUP MOUNT"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORACLE instance started. Total System Global Area 4275781632 bytes Bytes of size 2235208 fixed

  822084792 variable size bytes

  3439329280 of database buffers bytes

  Redo buffers 12132352 bytes

  Mounted database.

  Step 5: Creating a copy of the current controlfile

  $> echo "AS BACKUP COPY CURRENT CONTROLFILE FORMAT ' / goldengate/ORCL/CONTROLFILE/control01.copy.ctl'; ' | RMAN target / nocatalog ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Recovery Manager: release 11.2.0.3.0 - Production Fri Oct 22 17:03:27 2015 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: ORCL (DBID = 1420762587, is not open) using the control file of the target instead of recovery catalog database RMAN > From 22 October 15 backup allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID = 58 type of device = DISK channel ORA_DISK_1: from data file copy copy the current control file tag name=/goldengate/ORCL/CONTROLFILE/control01.copy.ctl output file = RECID = 1 STAMP = 893783011 TAG20151022T170329 channel ORA_DISK_1: datafile copy complete, duration: 00:00:03 Backup finished at 22 October 15 RMAN >

  Complete recovery manager.

  Step 6: Change of parameter control_files

  $> echo "ALTER SYSTEM SET control_files='/goldengate/ORCL/CONTROLFILE/control01.copy.ctl' SCOPE = SPFILE;" | sqlplus-s "virtue sysdba". -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Modified system.

  Step 7: Closing of the mounted database

  $> echo 'SHUTDOWN IMMEDIATE'; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORA-01109: database is not open The database is dismounted. ORACLE instance stops.

  Step 8: Installation of the database

  $> echo "STARTUP MOUNT"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ORACLE instance started. Total System Global Area 4275781632 bytes Bytes of size 2235208 fixed 822084792 variable size bytes 3439329280 of database buffers bytes Redo buffers 12132352 bytes Mounted database.

  Step 9: Check control_files parameter

  $> echo "see THE PARAMETER control_files | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- VALUE OF TYPE NAME ------------------------------------ ----------- ------------------------------ control_files string/goldengate/ORCL/CONTROLFILE/c ontrol01. Copy.CTL

  Step 10: Open the mounted database

  $> echo "ALTER DATABASE OPEN"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ALTER DATABASE OPEN * ERROR on line 1: ORA-01589: must use RESETLOGS or NORESETLOGS option of database open $> echo "ALTER DATABASE OPEN NORESETLOGS"; | sqlplus-s "virtue sysdba". ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ALTER DATABASE OPEN NORESETLOGS * ERROR on line 1: ORA-01610: recovery using BACKUP CONTROLFILE option must be

  Then...

  $> sqlplus/nolog ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SQL * more: Production release 11.2.0.3.0 the game Oct 22 17:14:43 2015 Copyright (c) 1982, 2011, Oracle.  All rights reserved. SQL > CONNECT sysdba virtue ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Connected. SQL > RECOVER DATABASE with the HELP of BACKUP CONTROLFILE until CANCEL; -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ORA-00279: change 621941 September at 22/10/2015 16:57:33 needed to screw 1

  ORA-00289: suggestion:

  /U01/app/Oracle/product/11.2.0.3/dbhome_1/DBS/arch1_11_892981851.dbf

  ORA-00280: change 621941 thread 1 is in sequence #11

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  Cancel

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Cancelled media recovery.

  SQL > ALTER DATABASE OPEN;

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ALTER DATABASE OPEN

  *

  ERROR on line 1:

  ORA-01589: must use RESETLOGS or NORESETLOGS option of database open

  Issues related to the:

  What am I misunderstanding? BACKUP COPY THAT isn't really a COPY.

  Why I can't use the 'copy' of the controlfile created by RMAN?

  Note:

  If I just copy the controlfile to the new location when the database shuts down everything works fine.

  Thanks in advance.

  Juan M

  
  

  Recovery Manager (RMAN)

  It is also mentioned in https://docs.oracle.com/cd/E11882_01/server.112/e25494/control.htm#ADMIN11288

  Create additional Copies, rename and move the control files

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• Problem connecting SSO using SDDM 4.0 to import the SQL Server database

  I installed the new production version.

  It migrated the connections of preference and db 3.3 very well.

  This figure includes several SQL Server databases, where I worked with for a while.

  3.3, I was able to add the correct driver and the related standards ntlmauth.dll body so that I could import of SQL Server (and even with SQL Developer 3.x, I could connect to and query SQL Server)

  The 4.0 update, the driver and database connections migrate very well but I can't connect. I get the old error "Library SSPI has not loaded". Where is this dll must go to 4.0? I tried to copy it to the same relative locations used by 3.3, but nothing helped.

  Help!

  Finally got it - had upgraded to 1.3.1 JTDS

• Used for Apex on the 10 g database but lost on 11 GR 2

  Hello.
  I used the apex 3.x (a little) on 10 g (Windows XP), but we have just upgraded our computer systems and now apex 3.2? This seems to have already been installed as part of the GR 11, 2 on Windows 7 Ultimate package. The database is installed in a personal database on a stand-alone computer that I use for test and development purposes. I found the version prior to the Apex, extremely fast and useful for loading large amounts of data in the format variable worksheet (no two alike) and I would go there with this one.
  
  However, I am having a problem to find a way to connect to the currently installed apex. The database works properly, and I can connect to sys, System. Apex_030200 or Apex_public_user, etc., with SqlDeveloper or SqlPlus.
  
  An example of my old connection string is - http://localhost:7777 / pls/apex/f? p = 4550:1:4367556252120989
  so I tried to use - http://localhost:7777 / pls/apex/apex_admin
  
  But makes me just "Internet Explorer cannot display the webpage".
  
  and http://localhost:7777 / apex - or http://localhost:7777/pls/apex - gives the same result
  
  I can't locate Apache on this computer so I guess that it is no longer comes with 11 GR 2 - so is there anything else I should have installed - I may have missed?
  
  So, can someone please point me in the right direction or at least to report a useful piece of documentation? -J' have been using E11946-01 but find is not terribly useful - until now.
  
  Any help you can offer will be appreciated. Thank you. I am new to GR 11, 2, as I just installed it this week so I'm a bit lost here.

  Grumpy,

  Just for your reference, the configuration tasks of Application Express 3.2 installation of the database (and using the Web server to the database, that is, the PL/SQL gateway shipped) are listed in the:

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e12196/db_install.htm#CBHEEDHJ

  Joel

• secconf.Sql. If it will work for upgrades or only for new databases?

  Hello
  
  I'm reviewing oracle 11g features and found that few things need special attention, such as checking the settings and the changes in the default profile.
  
  Looking at the secconf.sql file, I found this note
  
  REM only invoked for databases of newly created, not for upgrade of databases
  
  My question is
  (1) if I update a database to Oracle 10 G to Oracle 11 G, will, these changes in profile by default and the audit take place or not?
  (2) these 11 G changes will happen if we create new databases using DBCA?
  
  Thank you
  Delphine

  If you take a peek of scripts by calling secconf.sql in 11.2 /rdbms/admin, you see that secconf.sql can be run from catuprgd.sql with the following calling sequence:

  catupgrd. SQL-> catproc.sql-> catpexec.sql-> execseq.sql-> secconf.sql

  You can retrieve it with:

   pwd
  /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/admin
  [oracle@lx01 admin]$ grep secconf.sql *.sql
  execsec.sql:Rem  Only run the secconf.sql script for new database creations, not
  execsec.sql:      :secconf_name := '@secconf.sql';
  secconf.sql:Rem $Header: rdbms/admin/secconf.sql /main/3 2008/10/26 23:05:27 apsrivas Exp $
  secconf.sql:Rem secconf.sql
  secconf.sql:Rem      secconf.sql - SECure CONFiguration script
  [oracle@lx01 admin]$ grep execsec.sql *.sql
  catpexec.sql:@@execsec.sql
  execsec.sql:Rem $Header: execsec.sql 12-jun-2006.13:39:34 rburns Exp $
  execsec.sql:Rem execsec.sql
  execsec.sql:Rem      execsec.sql - secure configuration settings
  [oracle@lx01 admin]$ grep catpexec.sql *.sql
  catpexec.sql:Rem $Header: catpexec.sql 06-jan-2007.20:57:33 rburns Exp $
  catpexec.sql:Rem catpexec.sql
  catpexec.sql:Rem      catpexec.sql - CATProc EXECute pl/sql blocks
  catproc.sql:@@catpexec.sql     --CATFILE -X
  execcr.sql:Rem      Run from catpexec.sql (catproc.sql)
  [oracle@lx01 admin]$ grep catproc.sql catupgrd.sql
  @@catproc.sql --CATFILE -X
  

  Thus, it seems that catupgrd.sql still works secconf.sql. Given that catuprgd.sql is THE upgrade script (see http://download.oracle.com/docs/cd/E11882_01/server.112/e10820/scripts004.htm#sthref3623), it seems that this secconf.sql is still running.

  But this is not the case if you read execsec.sql code and comments:

  Rem  Only run the secconf.sql script for new database creations, not
  Rem  for upgrades or any other reruns of catproc.sql.  The version column
  Rem  in registry$ is NULL while catproc.sql is running the first time
  Rem  on a new database.
  
  VARIABLE secconf_name VARCHAR2(256)
  COLUMN :secconf_name NEW_VALUE secconf_file NOPRINT
  
  DECLARE
     p_version  varchar2(30);
  BEGIN
     :secconf_name := '@nothing.sql';
     SELECT version INTO p_version FROM registry$
     WHERE cid='CATPROC';
     IF p_version IS NULL THEN
        :secconf_name := '@secconf.sql';
     END IF;
  END;
  /
  
  SELECT :secconf_name FROM DUAL;
  @&secconf_file
  

  In the case of database upgrade registry .version $ is not null and above the code will run nothing.sql instead of secconf.sql:

  [oracle@lx01 admin]$ cat nothing.sql
  Rem $Header: nothing.sql 18-oct-2001.09:57:38 Exp $
  

  It is therefore very likely that secconf.sql is not running during the 11.2 database upgrade (I think that the same should apply to 11.1).

• We are in the streams we want to use the tools of replication of database of 3rd party for Oracle freeware. Pls suggest

  We are in the streams we want to use the tools of replication of database of 3rd party for Oracle freeware. Pls suggest

  Hello

  GoldenGate and shareplex are large databases for heteregenous platforms oracle replication tools.

  Shareplex replicates data between heteregenous platforms for example source on Linux and Windows.Shareplex target come from queues so that when we define it a few tables in the configuration of the source files, it will get automatically reproduced in the target database.

  SharePlex 8.6.2 technical documentation

  Concerning

  Rami

• I have a mac with el capitan on it.  This computer is not going to used for the design, but I need Acrobat 9 put on.  I have Acrobat 9 on a CD, I slipped the file in my application folder and double click on the Acrobat pro icon, nothing happe

  I have a mac with el capitan on it.  This computer is not going to used for the design, but I need Acrobat 9 put on.  I have Acrobat 9 on a CD, I did drag the file in my folder of the application and double-click the Acrobat pro icon, nothing happens, I'm stuck.

  You must install, copy... and 9 version does not work with El Capitan

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491