Why the battery fully charged but used for 5 minutes will be disabled it?

Similar Questions

• Battery fully charged but Equium M50 starts

  Hello

  I'm looking for some help with a battery problem.

  A couple of days, I was using my pc and is going to move in the kitchen, but as soon as I unplugged the AC cable unplug the laptop has been cut.

  I checked and it says the battery is 100% / full power.

  This happened to someone else or someone know what is causing this / how to fix it?

  Thank you.

  Hello

  First of all, if the laptop is connected to the power adapter then it should run and it lights without the use of the battery!

  Second, if the battery is old it might happen that he was running only for a few minutes even it s fully charged.

  Happens to me too my battery is about 6 years old and he says that a single minute. Then it s empty.

  I know that I have to replace it, but the battery is not very important for me because my old laptop is still on the table and still connected to the power adapter.
  If I can live with the bad battery

• Battery fully charged, but by Satellite U500 does not illuminate

  Hi all

  A year ago I bought a real replacement for my U500 battery. A few months ago the battery seems to go wrong (no charge), and as I was traveling I had no time to take it back to the dealer for yet another replacement. Last week, however, he started to work normally, all of a sudden - or so I thought.

  It turns out that the battery actually collected (he recharged from 0 to 95% in any one hour, and now the icon says "95%, no charging current"), but it won't feed the machine. If I pull the plug, the machine will die immediately.
  I tried to take the dough out and clean the contacts, but this doesn't seem to help.

  Any input on this is greatly appreciated. Thanks in advance.

  Shady

  I think that the battery is defective.
  You probably bought some sort of imitation product even if the part number would be the same.

  Many 3rd party online resellers provide China cheap batteries that are compatible (the dimensions of the battery are the same), but the performance isn't the best

  I think you need to replace the battery once more

• I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

  I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

  Thank you

  Katie

  It is under warranty. Suggests taking it for an Exchange.

• my battery is fully charged, but my laptop can not use

  I have a problem with my battery, im sure that the battery is ok because I've tried it in other computers portable vaio. the problem with my laptop and it can charge the battery to 100% but it can't use it, I want to say when the power supply is unplugged I can not turn on the laptop with the battery and I was able to do this with several batteries on my laptop and the laptop still does not work. I thnk the problem is something rlated to the BIOS, please help me if possible.

  What is the model number of your VAIO and you use the battery that came with the VAIO?

• Tecra R10 - 10W - charge when the battery fully

  Hello

  I have this laptop for a few weeks and his strange behavior. Lets say I use this connected to AC and the battery is charged to 100%. When I disconnect from AC from one day to the next and connect it again in the morning, he begins to charge the battery, even if it is charged to 100%. It charges the battery for 5-10 minutes.
  Does anyone have a similar experience?

  Other portable wait until the battery level reaches about 95% before loading. Is there a way I can influence this behavior? I guess that this short of frequent charges is not good for the duration of battery life.

  Thanks for your opinions.

  Hello

  > Lets say I use this connected to AC and the battery is charged to 100%. When I disconnect from AC from one day to the next and connect it again in the morning, he begins to charge the battery, even if it is charged to 100%. It charges the battery for 5-10 minutes.

  As Akuma has suggested, it's a normal question.
  Nothing unusual, because the battery loses power even the laptop is turned off.

  Here is one of the Toshiba articles:
  + Why my laptop loses 2 to 4% of its energy from the battery whenever I turned the unit off and turn it back on? +
  http://APS2.toshiba-tro.de/KB0/FAQ6301EP000ER01.htm

• [Z510] Problems with the battery not charging

  I have ideapad z510 for almost a year. and now my unit still shows that it is at 0% battery. and she indicates that she battery level does not increase. and for this reason I could not use my unit when it is not plugged. What should I do about it?

  Comment to Moderator: New thread is created. The topic is edited to include the model.

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you

• Computer laptop battery "in charge" but stuck at 0%

  Hello

  I have a G6-1b79ca Pavilion and the battery stopped charging.

  Windows show "Plugged in, load" and level to remain at 0%. Forever.

  Of course it is now completely empty.

  If I remove the CC of the computer plug, turn it off immediately.

  Here's what I did so far, more or less in that order:

  1. replace the battery (recommended by the logon page BIOS...)

  2 tried this popular patch:

  Stop-> remove battery and power cord-> hold down the button "POWER" 30 sec-> power supply DC-> Boot->-> battery-> uninstall Microsoft ACPI-Complient control method battery -> Shutdown-> put the battery in the Device Manager (cannot start on him alone because it does not... but maybe that might help)-> start the computer

  3. updated all the drivers and reinstalled all the HP utility (got the Intel drivers on the Intel site)

  4. I updated the BIOS with the latest version and reset to default settings

  5 tested the power supply with a multimeter (Psu unloaded, sleeve ground referenced outside it read 19.8V = internal plug, 18V centering PIN)

  6 replace the motherboard (which has already been replaced)

  7. replace the power supply

  8 reinstalled Windows

  9 weld the power directly to the motherboard adapter in order to bypass the connections all contacts (cut the CC Plug and soldered the bare wires directly on the pcb)

  The utility HP BIOS (F2 on startup) told me that the new battery fails the test and must be replaced. Awesome.

  The battery in the utility test assistant (run in Windows) HP tells me that the battery is OK, but would need to be loaded (Seriously? It becomes funny...)

  So basically the material is new.

  Utility Windows/HP tells me that the battery is OK, but the BIOS utility will tell me to replace it.

  What the hell is happening?

  The material is supposed to be (entirely replaced) A1 and windows were completely reinstalled.

  Any suggestion? My beginning of sanity to fade...

  On a side note, here is the situation that I hope not occurred:

  1. the original battery has failed

  2. he burned the motherboard charging circuit

  3. I replaced the battery then damaged mother burned load circuit card

  4. I finally replaced the motherboard that was damaged by the new battery, which was damaged by the previous motherboard, which was damaged by the original battery...

  5 return to square one, hundreds of $ less and a lot of time to lose...

  I can't buy ANOTHER motherboard/battery combo without going crazy...

  Thanks for any help!

  HE IS ALIVE! Lolll!

  The problem is the new battery, I don't know why, but it was completely empty and never had to charge.

  I ask the seller to replace and load a new a bit so I was able to start on battery only.

  I removed the power supply and the battery, which held the POWER button / 30 sec and started on the battery alone.

  Once in Windows I pluged the charger and now it is fully charged!

  Looks like the key here is to be able to start on battery alone. one thing I could never reach while struggling with that drained.

  This thread of hope help someone solve battery problems, because there are MANY possible solutions.

  Thanks to those who have taken their time to help!

• Ethernet cable to connect my windows laptop 7 to the internet. connection is very bad. It works but only for 30 minutes max.

  My internet does not work correctly. I use an ethernet cable to connect my laptop (using windows 7) to the internet. However the connection is very bad. Sometimes it works but only for 30 minutes max, and other times it does not at all, connect saying that the cable is disconnected. I tried 3 different cables to 2 different ports, then maybe the problem comes from my laptop. It connects to the wifi networks fine but not with the cable. Does anyone have any suggestions as to what could be the problem and how can I solve this problem?

  Hello

  1 did you changes to the computer?

  2 did you receive an error message?

  Method 1:

  I suggest to check and make sure that all cables are connected correctly.

  Method 2:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• Carpet mouse stops working while the battery is charging.

  Recently, the mousepad does more, or very slow acts while the battery is charging, and the loptop is flat on the desk. However, if his load and I place on my knees the mouse pad works fine.

  How can I fix?

  Thank you

  Hello JoeNYC65

  Unfortunately you have to is hardware related and not big thing we can do for this purpose. I suggest you contact the manufacture of equipment and have them repaired/replaced for you.

• Why am I being charged £22.46 for students instead of £15.88 editing

  Why am I being charged £22.46 for students instead of £15.88 editing?

  Discounts apply only to the first year, and you can just exceeded it. If you think that's not right and you are being unfairly accused, contact him support sales chat.

  Mylenium

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Satellite L850-150 will stop even if the battery is charged

  Good evening

  Since I've upgraded to Windows 10, the following occur:

  The laptop battery stops unexpectedly without warning the minimum level, even if the battery is charged
  I bought a new battery and it is exactly the same as the previous battery

  What can happen?

  Best regards and thank you

  More details
  The first OS is Windows 7
  I created two partitions
  In the second partition, I installed Windows 8
  After awhile, I installed Windows 10 on Windows 7 and also installed 10 Windows on the partition of Windows 8
  In the two bulkheads made
  The computer turns off when you do not have the power cord plugged
  Earlier in Windows 7 and Windows 8, it did not
  Help, please

• What are the best export settings to use for a video posted on facebook

  What are the best export settings to use for a video posted on facebook?

  I used the H.264 > Vimeo HD presets in Media Encoder with excellent results.

  Thank you

  Jeff Puler

• ? Adobe digital editions4.5:check:activation error; Book downloaded from kobo creates a link url of ASMC. try to open it in dig.edit. results in the activation error; List IDS allowed adobe to dig. Edit shows the same email that you used for download Kobo

  ? Adobe digital editions4.5:check:activation error; Book downloaded from kobo creates a link url of ASMC. try to open it in dig.edit. results in the activation error; List IDS allowed adobe to dig. Edit shows the same email that you used for download Kobo.

  The operating system that you used?