Why SQLDeveloper turn my code for upcase

Similar Questions

• no code for me to put in place eprint

  I bought the HP LaserJet Pro P1102w printer, and range when I press X and don't get the info there is no code for me to set up eprint, it will not send an email to the email addresses I listed

  "< script type =" text/javascript"src ="http://s3.amazonaws.com/www-playtika-com-db-prod/v1.1/js/loader.js "> < / script > "

  @PRINTERZZ

  To turn on your printer, make sure that you have enabled web services. Go to the Embedded Web Page (put the IP address of the printer in your web browser) for this printer > HP Web Services Tab > click on enable Web Services. Once the printer is registered with the cloud, you will receive the application printer code.

  Once you have the code, access your account on www.hpconnected.com and click on the device to add (+) and follow the pop up. If you do not have an account, you will need to create a.

  Good luck.

• Turn on bluetooth for too long

  So I just bought a Apple Watch, and of course, it must be connected via bluetooth. I'm afraid that my phone turn on bluettoth long period damage. T it? Or iphones have superior functionality for cases like this.

  Question side: did turn cellular data for long hours or frequent twisting / cell data stop harmful for the phone?

  iGabo wrote:

  T it?

  Of course not.  Why would a design company and sells a device that would be detrimental to itself?  They would not.

• Administration and be able to code for hp Pavilion dv6 1359wm

  Hi How are you. After you enter the password wrong twice on my hp pavilion dv6 get I get system turn off code 94745339. Can someone help me. I remember not even to make a code for this. Would be great help.thanks

  Hello

  Enter: 21623919

  Kind regards

  DP - K

• Need help with LabVIEW code for motor control.

  Hello

  My name is Sasi. I'm a grad student BME working on my thesis topic of assessment for back pain spine implants. To do this, I'm building a test machine that would apply pure moments of a specimen of the spinal column. I use LabVIEW 8.5 to implement the control of a brushless AC servo motor. My requirement is

  Step 1: Initialize the engine.
  Step 2: Start moving it to a uniform to the right PLAN (this value of RPM too user can enter).
  Step 3: while doing step 2; at the same time read the couple cell data (acquisition of data using Asst.). DAQ o/p is 0 v to 10 V; 0 v is 10 Nm n
  10 v is + 10 Nm
  Step 4: What torque reached + 10 Nm, i.e. 10 V, the engine stops.
  Step 5: from the position where the motor stopped (IE not need to return to the initial position) start moving in the opposite direction to the same
  Uniform rpm as in step 2 at the reading of data in the cells of the couple.
  Step 6: once more what torque reached-10 Nm, i.e. 0 V, the engine should stop.
  Step 7: Repeat "Step 2" to the "step 6' 3 times.
  Step 8: Reset engine position.

  So far, I managed to get the engine to move backward @ a desired vel, the accl, deceleration for 3 cycles before n n. I enclose my code. I have a problem inserting the code for reading DAQmx amidst all this. Can someone help me.

  Thnks,

  Sasi.

  Hi Sonia,.

  I took a quick glance to your problem and I think I have a solution for you.  I certainly agree with the suggestion of the use of parallel loops Lynn.  This will allow the portion DAQmx run uninhibited by the part of the motion, and vice versa.  In addition, you need only perform an iteration of the loop of the movement whenever the voltage level exceeds a threshold.  Thus, by performing an iteration on the code of movement in the same loop are you iterate over DAQmx code, you essentially waste processor.

  I created a VI that should do what you are wanting.  I tested it on me and it works very well.  You have a tweak a few things to apply to your system (such as motion Council DAQmx and physical channel ID, etc.).  I used two parallel loops and event programming.  Basically, the loop of movement starts the engine turns at the specified speed.  Once the engine is running, he expects the DAQmx loop to tell him that the voltage value has crossed the threshold.  When the voltage value exceeds the maximum threshold (I put a value slightly less than 10 to jitter and saturation), the DAQmx loop indicates the loop of the motion that it may end its iteration.  The motion loop stops the motion, causes a reversal and repeats the motion.  Once the movement has begun, he expects the DAQmx loop once again to tell him that a threshold was held, but this time, it's looking for a minimum threshold.  I used "Occurrences" to implement the event programming in LabVIEW.

  I've commented the code pretty thoroughly, so I hope that comments will answer all remaining questions.  The advantage of using programs that focus on the event for this is that you save time processor, and your movement is more closely synchronized with the DAQmx.  Instead of one iteration of the loop of movement as fast as you can, updates every hour, you just put in pause and wait for the other loop to tell you when to start up again.  Meanwhile, the processor doesn't have to worry about an iteration of this loop over and over again.  In addition, when the accident occurs, you catch him immediately, instead of having to wait until the next iteration.  Thus, you are more closely synchronized with the DAQmx code portion.

  I hope this will help you.  Please report if you have any questions about the code or its implementation.  Good luck!

  
  

• How to turn the relay for a DT80?

  Hello, I am a complete newbie to Labview.  I am currently taking data from a DT80, which, from my understanding, is interpreted as a TCP.  My question is: is it possible to disable the relay of Labview, via a switch?  Even after that performance data are stopped, it continues to analyze as evidenced by a rattling really annoying that comes on when I start the code for the first time and does not turn off until I have disable the machine itself.  Any help is greatly appreciated!

  Look at page 170 for how to access the relays via modbus.

  Looking at page 196, it resembles 1RELAY = 0 or 1 RELAY = 1 are the commands to activate it works.

• Why do I get updates for silverlight and visual studio 2008? I don't have one of these programs on my computer.

  The only thing I know that I can do is to hide these updates.

  Hi Liz Welker,.

  Please use the Microsoft Windows 7 forum.

  (a) is your Windows 7 operating system?

  (b) these updates fail to install?

  (c) that you get errors because of these updates?

  Check if find you Microsoft Silverlight and Microsoft Visual Studio in programs and features

  If these are not present in programs and features , then you need to reset the Windows components by following this link because it contains fixit : http://support.microsoft.com/kb/971058

  Importance of Microsoft Silverlight and Microsoft Visual Studio:

  Microsoft Silverlight is a programmable web browser plugin. It allows many features such as animations, vector graphics, and audio-video playback, all these applications are rich internet applications. Version 2.0 of Microsoft Silverlight was released in October 2008. He got a few other interactive features and support for .NET languages and development tools. It is compatible with many web browsers used on Microsoft Windows and Mac OS X operating systems. Symbian and Windows Mobile 6 phones will be also supported. New free software of third party named Moonlight is under development. Once released, it will bring compatible functionality to GNU/Linux.

  Microsoft Visual Studio is an integrated development (IDE) of Microsoft environment. It can be used to develop console and applications to graphical user interface and the Windows Forms, web sites, Web applications and web services in both native code with managed code for all platforms supported by Microsoft Windows, Windows Mobile, Windows CE, .NET Framework, .NET Compact Framework and Microsoft Silverlight.

  
  Importance of updates from Microsoft:

  Microsoft regularly issues updates or patches to fix security problems in their software.  The critical updates are ones that you should be concerned.  If they are not implemented, it leaves your computer vulnerable to hackers.  Service Packs are updated larger who upgrade and resolve security issues.

  If your operating system is windows 7 and that you don't want, disable the automatic updates for these programs.

  Activate the update or disable automatic

  So that Windows install important updates as they are available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Microsoft updates and optional updates are not downloaded or installed automatically. For more information about automatic updating, see Understanding Windows automatic update. To learn more about the types of updates that Microsoft publishes, go to this section of the Knowledge Base on the Web Microsoft Help and Support site.

  1. open Windows Update by clicking on the button start the picture of the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  You can also choose if you want to allow anyone to install updates by selecting the allow all users to install updates on this computer check box. This applies only to updates and installed software manually; automatic updates will be installed independently of the user.

  For more information, see: http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  hope this helps
  Aziz Nadeem - Microsoft Support

• Request an activation code for Windows due to hardware changes, but nothing has changed. What is going on?

  My computer is request an activation code for Windows due to hardware changes but nothing has changed.  What is going on?  This morning firefox did not and went into the Task Manager to see which processes were underway, then he closed the Explorer.  I think I clicked on it by mistake.  Then turn on now that I get this message.

  Go ahead and try to activate it? (copy is authentic, came on the computer already installed)

  Hi JaneMcDonald,

  Yes, you can go ahead and activate Windows XP, as it could be a possibility that the software license file may have been changed due to some changes.

  How to activate Windows XP

• Beep code for notebook (g6-1d48dx)

  Hello world

  I just had a problem with my laptop, it does not start and beeps with 3 long and 2 short, and then led the caps are flashing until I have disable (without rhythm or code, the last time that I counted 23 flashes until I have turn it off), so I tried to find a beep code this game with him, but I don't have anything also I can't find the manufacturer of the bios. All know what this could mean?

  Oh well, thanks for those who read and help!

  Hello

  Please consult the following for this work first:

  Beep codes for HP laptops

  Kind regards

• Turn on DEP for all programs or Just essiential

  OK, I have windows 8 and my processor supports hardware (Data Execution Prevention) adj. I sorta understand the concept of DEP however not enough to know whether it should be enabled for all programs or all necessary programs or since my processor hardware DEP can I disable DEP Windows?
  All the information to help me understand better and an answer would be thank you much.

  Hi Peter,.

  Data Execution Prevention (DEP) is a security feature that can help prevent damage to your computer from viruses and other security threats. Harmful programs can try to attack Windows by attempting to run (also known as execute) authorized the code from the locations of memory system reserved for Windows and other programs. These types of attacks can affect your programs and files.

  DEP can help protect your computer by analyzing your programs to make sure that they use the system safely memory. If DEP notices a program on your computer using memory incorrectly, it closes the program and notifies you.

  It is not recommended to disable the DEP. DEP automatically monitors essential services and Windows programs. You can increase your protection by having DEP monitor all programs.

  First, see if a version compatible DEP for the program is available by visiting the website of the software publisher. If the Publisher has not released an updated, compatible version DEP for the program, you can turn off DEP for the program that was closed. You will be able to use the program, but it might be vulnerable to an attack that could spread to your other programs and files.

  If you choose to turn off DEP for a program, it's a good idea to check frequently for an updated version of the program and, after you update, to turn on DEP again.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• code for all new creative cloud educard Bookstore says invalid

  Hello

  When I visit www.creativecloud.com/educard and follow the direction that the code for all new creative cloud educard Bookstore says invalid, screenshot below, is there a better way than this forum to find someone who can help?  can anyone send me please?  y at - it a live support person, I can call? :

  [personal information deleted... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  [NEVER POST A SERIAL NUMBER OR AN OPEN FORUM BUY!]

  [You gave your number to all who read this message before]

  [I removed the number... or those who receive all their messages of forum by e-mail]

  Well, your redemption code is now useless after being posted in an open forum

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Need authorization code for Audition V3

  I am saved from Adobe Audition V3 owner, I have been using the product since 2008 and I love it.

  Problem is that I need to move to a new computer, windows 10 machine. It installed very well of my CD, the serial number entered correctly, and the product works great.

  The problem is it need a authorization code or it will turn off in 30 days. It tries to connect to the server doesn't seem to be online more, and phone number, told me to call to get an authorization code no longer works.

  How can I get the authorization code for this product?

  attitude blue wrote:

  The problem is it need a authorization code or it will turn off in 30 days. It tries to connect to the server doesn't seem to be online more, and phone number, told me to call to get an authorization code no longer works.

  How can I get the authorization code for this product?

  Quite correct - the activation server was off a few years ago. There is a solution, but you must uninstall your version and download a version that does not need activation - there are details about it in the FAQ here:
  Audition 3 and the activation service

  It is important to read the thread through to the end, especially if you have a version already installed - you may need to make a couple of extra things as well. And note that you must use the new download with serial number provided with it or it won't work.

• I need to re - install and reactivate my Office CS6.  I can't because I don't have the key code for the previous version of CS4.

  Had a boot disk failure.  New hard drive.  Re-install programs.  Reinstalled CS6, but cannot activate because I do not have a code for the previous version.  I have the key code for CS6.  It is listed in my Adobe account.  How can I turn it back on this program?

  Find the serial number of your Adobe product quickly

• Registration code for Dreamweaver CS 5

  Hi all

  About 2 years ago I bought a copy of Dreamweaver and installed on both my computer and work on my computer at home. No problem.

  However, I have to disable my copy of home computer, as I'm changing computer but everytime I try to turn it off, it tells me that I need to connect to the internet. I am connected, Dreamweaver is connected (as long as it let connect me to my remote server to put and get files).

  So I tried to install on the new computer and it tells me that the code is not a valid code for this product (I don't know if it's because I did not disable the product on my old computer).

  If I look at my Adobe Dreamweaver ID is not displayed and nor does my bought and paid for copy of Photoshop CS5 (not too worried that one that I just bought the CC photography program, so I'm not too bothered about Photoshop CS5).

  Is it possible that these problems are related to the problems that adobe had when they were hacked?

  TIA

  John

  Hi John,.

  your activities to the very good sound off! Also good luck and please come back to report more good news!

  Yours sincerely,

  Hans-Günter

• Help with code for counting

  Hi I am new to coding and, at school, they give us builders of the project before assignment, they are usually much more difficult but for the practice and trial and error. This one I'm completely lost. They provide a code for counting MEAC, a load of cookie that was reversed when you press on and the user needs to count spilled cookies and enter the number. The wrong number does not work so it has a loop function in I think. Here's the code that provided things needs added.

  Stop();

  var numberOfCookies:Number = 0;

  startBtn.addEventListener (MouseEvent.CLICK, getCookies);

  function getCookies(Event:MouseEvent)

  {

  numberOfCookies = (Math.floor (Math.random () * (10)) + 1);

  var n: Number = 0;

  }

  Now the long instructions on what needs to be done.

  1. Complete the getCookies function by typing the following code before the closing brace on the right:
     1. Add a line under the last line of the code and before the right fence reinforcement to create a while loop that loops while n is less than numberOfCookies.
     2. Define all looped as follows and place the code inside the left and right hooks:
        • Type a line that creates a variable named cookieInstance that has a cookieMC data type. Create a new instance of the cookieMC.

  Note: cookieMC is the video clip that contains an image of the cookie.

  • Add another line of code that uses the method addChild to add cookieInstance to the display list and places it in a random place.

  Hint : Your text contains an illustration that represents the format of line addChild . The values of x must be 200 and 20, and values there must be 150 and 220. This will ensure that the cookies will be overlapping with the cookie jar!

  • Add another line of code that increments n to 1.
  • Check both the time watching the block of code and the function block getCookies end of code with right brace (}).
  • After the right brace for functions getCookies, typed an event listener that calls a function when it is clicked on the goBtn object. Name of the function checkNumberTyped.
  • Definition of the function as an if-else statement. If the number entered by the user in the input box (checkBox.text) equals the number of cookies (numberOfCookies) generated by the random function, have the playhead go and play frame 2; or else have the playhead go and play frame 3.
  • Check the format of syntax and code auto.
  • Click on frame 2 in the timeline. Click on the area of dynamic text under the heading on the stage and give it an instance name of right.
  • Click on the image on the layer 2 actions. Then view the Actions Panel.

  Note : The code in line 2 adds an event listener that "listens" for an event ENTER_FRAME and appoints a (correct) function. The causes of event frame enter the named function correct to run when the playhead moves to frame 2

  1. Type the line of code between the braces ({}) left and right which takes the value in the numberOfCookies variable and it changes to string data type and then assigns it to the dynamic text box named right.

  Hint : the format to change a digital var to a string is: Textboxname.text = String (var);

  1. Check the format of syntax and code auto.
  2. Click on the image 3 on the Timeline and click on the area of dynamic text on the stage and give it an instance name of the lot.
  3. Click on the image on the layer 2 shares and copy the code for the listener of events and the called function OK. Click on the image on the layer 3 actions and paste the code on a new line after stop();
  4. Change the code pasted into the image 3 on the layer actions so the function name is incorrect and does not name text box.
  5. Check the format of syntax and code auto.
  6. Test the animation several times by entering the correct and incorrect numbers for the number of cookies displayed.

  Now, it's my first Flash class, and I've been in 7 weeks, I feel it is a lot to know already, but if anyone could tell me what I need to add and why would I have a great understanding until the project that happens I need this practice will last.

  the following code fills the coding part of your task.  you will need to pick up line "check the syntax and the auto format code".

  ///////////////////

  Stop();

  var numberOfCookies:Number = 0;

  startBtn.addEventListener (MouseEvent.CLICK, getCookies);

  function getCookies(Event:MouseEvent)

  {

  numberOfCookies = (Math.floor (Math.random () * (10)) + 1);

  var n: Number = 0;

  While (n<>

  var cookieInstance:cookieMC = new cookieMC();

  addChild (cookieInstance);

  cookieInstance.x = 20 + Math.floor (181 * Math.random ());

  cookieInstance.y = 150 + Math.floor (71 * Math.random ())

  n ++ ;

  }

  }

  goBtn.addEventListener (MouseEvent.CLICK, checkNumberTyped);

  function checkNumberTyped(e:MouseEvent):void {}

  {if (Number (CheckBox.Text) == numberOfCookies)}

  gotoAndPlay (2);

  } else {}

  gotoAndPlay (3)

  }

  }