Connect an additional monitor Flatron L1515S LG to Satellite Pro P100

Similar Questions

• Connect a Toshiba TDP - T8 (projector) to a Satellite Pro P100 PSPA4E

  Can someone advise have installed the NVidia driver but without success.

  Asked Toshiba Tech support no better.
  Advised to visit their help center projector (£1.50 / min) needless complete waste of guy money knew less than me.

  Purchased two items at the same time, but are completely incompatible or so it seems, what should I do.
  Toshiba seem to be incapable of any suitable option!

  Any one out there can help please.

  Hello

  As far as I know the Satellite Pro P100 support the
  -Port VGA (monitor)
  This 15 port pins you allows to connect an external video monitor to the computer

  -Port DVI (monitor), this is optional and not supported by all Satellite Pro P100
  This port allows you to connect an external video monitor to the computer via a DVIcable

  -S-video output port TV
  This s-video out port allows you to connect a TV to cable s-video computer vista 4 pins.
  This port returns the NTSC or PAL signal.

  I put t know what port/cable from the projector supports, but generally, it should be possible to connect this projector to the VGA or DVI port.

  Good bye

• Satellite Pro P100: losing picture on external monitor when using the DVI - D connection

  Guys,

  I have a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), recently I bought a DVI - D cable to link them together.

  Now the problem is that when I connected to 1400 x 900 LCD TV screen goes to a black screen several times (usually when there is a lot of activity or I'm resizing windows to the maximum to the minimum).

  Now, I would have thought it would be the LCD TV doesn't do not signal or refresh rate however I connected using a VGA cable and its fine - no problem just no matter how much I minimize my windows or put a lot of activity on the screen. To complicate matters even more, when I run the screens in "Dual screen" mode instead of "Clone" if I put one of them 1400 x 900 to 59hz in 16 bit it works fine...?

  Can someone help please that it made my head that I can't understand what the hell is the cause!

  I've included a list below all the different resolutions / screen modes I tried it and the result.

  Thanks for your time & help.

  Concerning

  Craig.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - constantly flashing black screen
  60 Hz - constantly flashing black screen
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 32-bit color) using 3 m DVI
  59Hz - screen flashes black only when resizing windows
  60 Hz - screen flashes black only when resizing windows
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - no option
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 16-bit colors) using 3 m DVI
  59Hz - works great
  60 Hz - very rarely flashes black when resizing.
  75 Hz - intermitantly flashes black when resizing.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 on Samsung 940MW Toshiba set to dual screen (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  Hello

  I hope that you have enabled user s manual supplied with your device. On page 148, you will find a very interesting picture on the supported display resolution.

  I have to be honest with you and say that I am no expert DVI because my LCD doesn't have this port, just HDMI but if I have understood you as soon as you have problem with a resolution of 1440 x 900 only. This resolution is not listed as supported, and I presume that it is not unusual to have a problem.

  Sorry, but I think that you should use maximum supported only resolution 1280 x 1024.

• Satellite Pro P100 - unable to connect to Internet via LAN

  I have a Toshiba Satellite Pro P100. Model no SPSA4A-005002

  I used my recovery disc and erased from my computer, because of a virus and now I can't connect to internet via cable but my wireless internet works perfectly.
  Its quite dead there is no lights on the back of the laptop where I plug in the cable.

  Hello

  Your network card is properly recognized in Device Manager?
  In your case, I would try to update the LAN driver. You can get the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, you check the version of the BIOS. The most recent version must be installed and load default settings here.

  In the worst case, it s only a hardware problem and must exchange the motherboard together :(

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• How to connect an additional monitor for the gateway all-in-one?

  Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

  I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

  I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

  in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

  Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

  Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

• my monitor is broken on my laptop and I connected an additional monitor. How can I get the extra monitor to work while not in safe mode?

  Someone hit my monitor and broke. I connected a regular monitor, but will only work in safe mode. How can I disable the broken screen so that I can use my laptop?

  Hi, try the normal mod F1, F4 or F5 Fn (function) button for the track changes and change the default monitor.

  Safe mode, select monitors in Control Panel.

• HP touchsmart sleekbook 15 - connect an additional monitor

  I just opened my HP Pavilion Touchsmart Sleekbook 15 and I want to connect a 2nd monitor to stretch my office. I have a Dell monitor that I used for a year or two with a VGA connection. There is no standard vga port on my new Touchsmart.

  How can I connect it?

  Hello

  HP Pavilion Touchsmart 15 Sleekbookis a series of many models and their products, what is yours? The following (HP Pavilion TouchSmart 15 -b153cl Sleekbook) model only has HDMI port

  http://support.HP.com/us-en/document/c03685093

  That's why you need HDMI VGA conveter such of the following part to connect to the VGA monitor

  http://www.Jaycar.com.au/productView.asp?ID=AC1638

  Kind regards.

• How to connect an external monitor to the hp slate 21 pro

  I have a HP Slate 21 Pro. Anyone know how I can connect an external monitor to reflect what's on my tab

  Hello

  There is no way to connect an external cable monitor such that HDMI port is entered only.

  Your only solution would be to use the wireless display option in the settings, but you would need a monitor/TV/adapter that would work as a Miracast receiver.  I'm not sure specific screens that function as receptors, but I used adapters are the PTV3000 Netgear and Actiontec SBWD100A01,.

  I hope this helps.

  Kind regards

  COWA

• The external monitor resolution not supported on Satellite Pro U400

  I want to connect an external monitor running at 1440 x 900, but the built-in driver does not offer this resolution and the display is very blurry.
  I think that the Intel driver this will lead, but the computer complains that it is not verified for use and will not be installed.

  Anyone had any joy getting this working?
  Charles

  Unfortunately, this is because of the limitation of the driver.
  What should do? What you can do is to install a non-Toshiba graphics card driver but also, this isn't the best idea.

  Third party graphic driver can have a negative influence on the features of the graphics card and allow him to work without limitation. It may end with overheating or material damage.
  So think twice before doing this.

• Monitor does not not on Satellite Pro L10

  Hi, I have problems with my satellite laptop computer pro. When I switch the power on laptop fires upward, but it doesn't have the power to screen? has anyone else encountered this problem? or know a key that could have locked the screen? Any advice would be much appreciated!
  Thank you very much.

  Hello

  you have an external monitor on your hands? Maybe you should try to connect the external monitor to your machine to see if the laptop displays the image on the external monitor.
  If your machine is not then probably a serious malfunction, the beef if you see an image perhaps you just have to try to change monitors with the Keycombination FN + F5 (which is to change the display device)

  Welcome them

• Satellite Pro P100: external display connected to DynaDock uses 800 x 600

  I have a P100 SatPro attached to a monitor external 19 "via a Dynadock.

  By default, whenever I start the laptop the screen resolution 800 x 600.
  I have to manually reset to my desired resolution (1280 x 1024, 32-bit colors).
  If I reboot at any time the resolution then default back to 800 x 600.

  It's driving me crazy! Why won't save the settings? I tried to reinstall the software with no joy.
  Operating system is Windows XP SP2 and I'm a full administrator.

  Any help or ideas appreciated.

  see you soon
  Ian

  Hello

  I m not 100% sure if this might help you, but I noticed a similar problem on the Tecra M4 anchored to the multiple dock Tablet.
  The update of the BIOS helped solve this problem.

  In addition, an update of the graphics card driver would be desirable.

  Good luck

• Satellite Pro P100: Can which digital cable I use to connect the stereo

  I just bought a new P100 and think generally that it's great.

  However, if I plug it into my stereo via the headphone to the front of the computer, then it is very noisy. I read somewhere in the manual that this Jack is used also in digital form - weird! Is there a way to transform digital or I'd be better connection on my external (stereo only) DAC. If this option is ideal so what cable should I - nothing about this in the manual or on the Tosh site. I use a stereo plug for cable twin phono right now.

  Any advice from someone who has connected to their own hifi would be appreciated.

  Bill Mac

  Hello

  The headphone jack offers the possibility to S/PDIF which allows to connect the laptop to the hifi on digital channel.
  You need a simple cable S\PDIF. This cable you can get from each computer/laptop.

  Simply visit this dealer and ask for this kind of cable

  By the way: try to disable the option of its virtual when the laptop is connected to the stereo

• How to connect an external monitor to a Dell Vostro 1500?

  What is required?  cables? See: the screen is black and the need to obtain files/photos to the computer.

  Hello

  You can connect an additional monitor to the laptop.

  To learn more about how to connect to an external monitor, please refer to: set up multiple monitors

  After the back if you have any questions.

• Possible to connect an external monitor for laptop HP Pavilion dv4t-4200 CTO

  I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA, one port that resembles a cable port phone/broadband and one that looks like a USB port, but indented on each side down. I can even connect an external monitor? How will I know if I have more than 1 video card? In addition to the usual USB/headphone ports, I have not all ports. He says that my drivers are up to date... but I don't know even what I'm looking for. Do I need to install something or buy some kind of adapter?

  I'm trying to connect an external Dell montitor via the VGA port with a VGA cable. The monitor has power, but my laptop does not detect recognize them / it. However, when I plugged in the first time in, my laptop screen has shrunk in a square (vs the entire screen) so he acknowledged something... but nothing happened on the external monitor.

  I tried to detect through my display settings, but I have accidentally changed some display setting until the reception desk shows only 1 monitor, but not selected my real laptop screen or something or changed to be Monitor 2 (even if there is no monitor 1), so when I plug the cable into my laptop suddenly my desktop disappears and it's just a white background screen - and I cannot access the screen of the computer settings or whatever whatever... when the cable is disconnected this setting seems to be normal, so I can not understand how to fix it.

  Sorry, I don't know what I'm doing here - please help!

  Hello

  All Dell monitors are equipped with CD for the drivers. Your laptop may not know the monitor without its driver, it will not install automatically. Please check:

  Ringht click an empty space on the desktop,

  Click Customize

  Click on display

  Click on change display settings

  You can see the TWO laptop screen and external monitor in there, as shown in the following image:

  

  For the test, I put my Dell monitor is my main screen. If I can't see 2 monitors, you need its driver first and then check the cable.

  Kind regards.