Why the appliction started automatically has no arguments the command?

Similar Questions

• Why the command/tab does not work in the new discourse during a presentation

  Why the command/tab doesn't work with Keynote 6.6.1 during a presentation.  I can't get out (smoothly and professionally) presentation for applications that run in the background, then return smoothly.  Slows down my presentation, seems unprofessional.  This key combination worked very well until I used the new version of Keynote.

  We have no problem with the service application switcher using Yosemite and Keynote 6.6.1 on any of our client systems, or there is no record of anyone having this problem on the discussions.

  This sounds like a problem of systems;

  • what amount of RAM is installed
  • What is the amount of free space on the boot volume
  • have you antivirus, security and cleaning of installed applications
  • emptied the Recycle Bin
  • is the clear office of files and folders

• cs6 PS why the command copy is grayed out - cannot copy obj?

  PS cs6 cc:

  Why the command copy is grayed out - cannot copy obj?

  

  lsepolis123 wrote:

  If press Ctrl + A selects all the psd doc... or (when the selected layer - in the Panel layers) in the tool move or the selection tool, well?

  While the ants marchimg shows the layer limits what you write the entire document. Only the pixels of the target layer are selected.

  Here are two screenshots.

  I have two documents open in Photoshop. There are three top ob Basemap layers layer a red, a green and a blue.  Second teas of the same size but only a white background layer.

  I aim for the Green layer made a Ctrl + A to select the green channel any note the dotted moving line describing the composite view of the entire document. I followed the Ctrl + A with Ctrl + C (copy).

  I then passes to the second document just a white background layer and did a Ctrl + V after the background screenshot shows the results.  Only the green pixels have been copied to the Clipboard.

  

• Why the command "Insert rollover" inserts not pensionable code?  (DW CS5 v11)

  I open a new html page, insert a rollover from the Menu insertion, image provided two corresponding images as directed and turning that result on the page worked as expected, both in Live View of DW in Firefox.

  But when I tried to validate the page, what he came back with 25 errors and 22 warnings.

  Here is my page- http://www.griffinchaseoliver.com/rolloverNavButton%20validation%20test%201.html

  Here is the validator- http://validator.w3.org/check

  What is going on?

  TNX - Jim

  25 errors it finds, all except one are related to the validator process the JavaScript block as if it was HTML.  The only real mistake against the doctype declared on the page is the lack of an alt on image attribute/value pair.

  

  You can eliminate errors javascript by encapsulating the code within the CDATA tag so that the validator sees this block as it should - data rather than HTML.

• Why pictures start automatically on reboot? I never use it and it does not appear in the startup folder.

  Why photos starts automatically when you restart. It is NOT in the folder.so of starting, why what is happening? I never use photos, so it's a loss of memory perfectly!

  Perhaps you have a device with linked images that attempts to import Photos?

  Also where the startup folder did you check?

• Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

  Hi all... I am a newbie with oracle database.,.

  I have the problem of monitoring:

  I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

  I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

  Installation-) before and during the hostname is localhost.

  (-) After the installation, I changed the host name in VMCentOS

  From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

  When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

  Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

  P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

  Hello

  It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

  When you install EA or there is no script that starts the database at startup.

  If you wish, you can create by yourself. For example search for instructions to Google how to create script.

  Kind regards

  Jari

• the invocation service does not start automatically

  Hi, I set up call service starts automatically as below, however, it has not worked. And I need application code to get the service from CacheFactory.getService ("MyInvocationService") to start it... why it is so? Thank you.
  
  Henry
  
  < invocation-plan >
  < scheme name > example-invocation < / system-name >
  < service name > MyInvocationService < / service-name >
  < number > 10 threads < / thread count >
  < system-property autostart = "tangosol.coherence.invocation.autostart" > true < / autostart >
  < / invocation-plan >

  922963 wrote:
  Hi Robert,.

  Thank you. Yes, I have my own main class. In order to take advantage of the beginning and the monitor etc, already provided by DefaultCacheServer, my hand class should DefaultCacheServer? or a better way to do it?

  Henry

  Hi Henry,.

  Simply call DefaultCacheServer.start () which starts the services (but does not start the thread of analysis that restarts the services of consistency if the node was chased from the cluster automatically).

  If you want the thread of analysis, too, then, in my opinion, you can call DefaultCacheServer.startDaemon ().

  Stop the services and the thread of analysis is DefaultCacheServer.shutdown ().

  Best regards

  Robert

• Why the icons disappear from the Start Menu?

  The Start Menu has two regions: a region for applications whose icons are pinned to the Start Menu and two region, for applications whose icons are not pinnend to the start menu... the positions of icons these vary, depending on the frequency of use.

  Why in the region shortcut icons do not disappear into the Start Menu?
  They are not being "jostled" more low ranking... they stop just appear.
  Open an application can hand its icon at two area of the Start Menu,
  but then after a few days (maybe earlier), for example, the icon is missing.

  Thank you
  DaleB

  You already have the answer yourself.

  "The two region" can only hold x number of icons... Let's say 7.
  If you later open a 8th program, among the list of 7 will be "hit.
  I opened Windows DVD Maker. Later, I opened MS Excel. Windows DVD is moved from the list.

  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How can I change the programs that start automatically when I turn on my computer?

  I have several programs that slow down my departure upward.  I didn't not use programs and would that they won't start does not automatically.

  I have several programs that slow down my departure upward.  I didn't not use programs and would that they won't start does not automatically.

  First of all, note that you should be in * all * the programs that start automatically, not only with those who are in the system tray. Not all the programs auto-start manifesting by an icon in the status bar.

  On each program, you don't want to automatically start, check its Options to see if she has the choice to not start (make sure that you actually choose to not run, not simply a "don't display the icon" option). Many can easily and better be arrested like that. If this does not work, run MSCONFIG from the start. Run the line and on the Startup tab, uncheck the programs that you do not want to automatically start.

  However, if I were you, I wouldn't do this just for the purpose of the minimum number of running programs. Despite what a lot of people tell you, you should be concerned, not with the way * a lot * of these programs you run, but * that *. Some of them can seriously affect the performance, but others have no effect on performance.

  Don't stop all programs to run willy-nilly. What you need to do is to determine what each program is that its value is for you and what the performance cost is running all the time. You can try searching the Internet and ask questions about the details here.

  Once you have this information, you can make a smart informed decision on what you want to keep and what you want to get rid of.

• Why the task tray Menu ConfigFree has stopped working

  Why the task tray Menu ConfigFree has stopped working and how can I fix it

  ConfigFree is a program of Toshiba.  You should ask Toshiba.  Generally you can start it via the start menu if (Start-> Toshiba).

  I hope this helps.  Good luck.

• Should I have the Network Access Protection Agent Service to start automatically on Windows 8?

  Hello!

  While I was looking for a completely different setting in Control Panel in Windows 8, I came across the center of the Action settings and noticed that the Agent of network access Protection service is not running. I open the computer management snap-in and noticed that the service is configured by default must be started manually. I looked for more information on the internet but I wasn't able to find a detailed explanation about his goal for a personal computer. The only explanation I found applied only to Windows Server.

  Is it really necessary to configure this service to start automatically on a home network, or can it be just left set to start manually? What is its use on Windows 8? Is this just in case the computer needs to access a network of business domain?

  I am running Windows 8 Pro 64-bit edition on an Acer Aspire 5552-5898 connected most of the time in my network domestic, although usually I connect to public networks. My computer is not configured to connect to a domain on a corporate network, not even using VPN. When I access my e-mail from this computer company account, I first need to authenticate with a code provided by RSA device before I can connect to Outlook (OWA).

  See you soon!

  Carlos

  Hi Cspork,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  As I understand it, in the center of the Action the officer of Access Protection settings network service does not work.

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer.

  The service can be left to be set to start manually.

  It is especially where the computer needs to access a network of business domain.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Automatically deleted from the storage of the DSO after data files using the command cp ASMCMD... why?

  I installed Oracle database on Linux 6.6, Virtualbox 11.2.0.1.0.

  I used ASM for database storage.

  When I want to perform a backup in offline mode. I stop the database data files and copy to the filesystem as follows (for example).

  ASMCMD [+] > cp +DATA/ora11g/datafile/system.270.883592533/u01/app/oracle

  The files copied with success and also any other data files, logs and controlfiles files. Then, I also rename all the files in editing mode.

  After that, I used the backup files to start the oracle of backup (storage non - ASM with new pfile edited)

  Open successfully from a backup database.

  But when I want to use old spfile to open the database for the storage of the DSO again, a few errors have occurred as no data files in ASM storage.

  I check the contents of the ASM storage with ASMCMD commands. And realize that there only spfile and controlfile located ASM storage and other files: data files and online redo logfiles automatically deleted.

  Why the data files and log files deleted ASM storage? Is this normal? I have no delete all files of the DSO.

  It is actually deleted from the use of the cp command?

  Exactly what we say.  Data in ASM files are OMF (Oracle managed files).  The RENAME translates the DSO by deleting the original file.

  Hemant K Collette

• Why the "vertical-align" argument does not work?

  Very often, I try to use the "vertical-align" argument to control the CSS formatting, but so far he has never worked, so I had to resolve the situation by specifying values for margin...

  Why the "vertical-align" argument does not work in CSS?

  Alternatives?

  For your reading pleasure.

  http://phrogz.NET/CSS/vertical-align/index.html

  Gary

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• How to disable the App tabs (tablets should) start automatically?

  How to disable the App tabs (tablets should) start automatically?

  because the option [don't load the tabs up to choosing] dose does not work with her, and she keeps starts every time when I restart Firefox.

  Please help me!

  Don't bother, I arrived at the solution of my car, you can do the following:

  Type "subject: config" [without quotes!] in the location Bar (address bar) and press ENTER to display the list of preferences, as shown in the photo #1 in Firefox 17 under Windows 7.

  If you see a page with the warning as pictured #2, this might void your warranty!, click the "I'll be careful, I promise!" button to continue (in fact, there is no guarantee that it is, it's more a joke to ensure that users are aware of what they are about to do). Uncheck the box to avoid the warning in the future.

  Now to the search bar in the image #3 type: tab and search for it

  preference name:
  

  Browser.sessionstore.restore_pinned_tabs_on_demand

  or you can copy directly to the search bar.
  Then, follow the instructions in the photo n ° 3 .

  Just in case where if the photo appears, follow these steps:

  First: Right-click on the name of the preference that we sought.
  Then, click Toggle to change the value from false to true.
  Or, double-click it and it will change.
  Finally, restart Firefox, and you'll notice that they don't automatically load until you click on it.

  That's it, good luck to all. ;-)

  Note: the list of fonts preferences fat is the user changed, and the United Nations-fat is the default setting.

  Warning: change preferences can, in rare circumstances, break Firefox, Thunderbird or Mozilla Suite, or cause strange behavior. Only do if you know what you're doing or trustworthy tips.

  Additional INFORMATION:

  Subject: config is a feature of Mozilla applications which lists application settings (known as preferences) that are read from the profile files prefs.js and user.js and the default application. A lot of these preferences are not present in the preferences or Options dialog box. Using about: config is one of the many methods of changing the preferences and adding the other 'hidden '.