Why the black cartridge HP364XL is not

Similar Questions

• Black ink cartridge replaced HP Photosmart 5514 and the black cartridge does not print

  HP photosmart 5514

  Windows 7

  no error appears in the window, acts as he is very well, printing just no black ink is on the paper.

  I just replaced the black cartridge with the right product from HP, the installation went well.

  Hello

  Have you checked that the cartridge is properly ventilated? Have you tried running a clean print head?

  If a pipe is clogged, carefully clean with a PIN.

• OfficeJet 4630: 4630 can print grayscale using only the black cartridge?

  I have purchased a printer 4630 and want to use it like I did my old PSC1350 - using only the black cartridge for all printing. I can't find any setting of grey for the 4630 that will allow for this. With the 1350, the grayscale setting would prevent any color ink cartridges is used, an unnecessary expense for printing in black on white paper.

  If there is no setting on the 4630 grey scale, can I be sure that black ink is used only for printing without color?

  Hello @clif9710!
  
  Thanks for posting on the HP Forums!

  Your printer Officejet 4630 should be able to print in gray scale and the options should be in the window of the printer printing preferences.  I was able to locate a document regarding the changing settings in windows 7 print.

  If you do not get the options to print in gray scale you will need to uninstall the HP software, including the old software, restart the computer and re-install the HP Officejet 4630 software again.

  To uninstall the software HP click here: uninstall the HP software

  To download the HP software, click here: driver and software Officejet 4630

  Another good thing about the Officejet 4630 is that it allows to print mode single cartridge.  cartridges for your printer built in print heads which means that it requires no 2 print cartridges.  If you never use the Tricolor cartridge or you are planning on printing in black, you can remove the Tricolor cartridge, put the cap of the cartridge down and close the lid.  The printer should now say "mode single cartridge printing.  Once the printer is closed upwards, you can send your print job and it will print using only the black cartridge one!

  Thanks again for posting on the forums of HP and post back and let me know how it goes!

• How do I change computer to use only the black cartridge for print on PSC 950 h

  I'm having a problem with my hp psc 950 printer - when I try to copy something it gives me an error to support code on enter to align cartridges-i do this and it is not always copy - how can I change the printer to use only black ink, the color cartridge is probably more good, I just changed black ink and I really don't need the color in my copies - all solutions would be greatly appreciated

  Thank you

  Hi yalulu,

  I understand that you do not use the black cartridge only. I find the features page and the manual for the PSC 950 but did not find that I was looking for. I would suggest trying to use the printer in mode single cartridge, but I am not sure if the printer supports this feature, that's what I was looking for.

  Try out both cartridges, then put in black only. If this does not work, the only other suggestion I have is to replace the color cartridge.

  You can use the below document to troubleshoot color cartridge, select the document that best describes the issue, or take a look at the same time. You can find these useful.

  • Mistakes print cartridge
  • HP 15, 17, 23, 41, 45 and 78, printing unit is not detecting Due cartridge to white, waxy Substance on cartridge Contacts

  I hope this helps to solve the problem you are experiencing.

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• OfficeJet Pro 8500 can operate with only the black cartridge?

  I have never use my color printer and do not want to buy color cartridges. Can I program the 8500 to print with just the black cartridge. If so, how? Currently, the printer does not work if all the cartridges are not loaded and with ink. Please notify.

  Hello

  Please try: put a piece of tape on the oblong hole in the ink cartridge of, it will continue to print black only. And once again, it is only a few pages.

  Kind regards.

• Black cartridge C410a does not

  Installed all new cartridges, ran the alignment, clean the nozzles several times, sitting and reinstall the black cartridge. Ink level on the screen of the printer displays full cartridge but the solution (on PC) Center shows no graphic content. Several weeks ago installed new black cartridge that failled. Bad cartridge Assaumed. Current cartridge worked so far. Several months ago I had to install a new printhead when all cartridges did not exist. The installation did fix the problem. Some forums suggest to soak the printhead in the distilled water for no more than 30 minutes... before you do that, is there a less dangerous resolution? Product # CQ521A and S/N {deleted personal information}.  Printer is out of warranty, but would like to help with this problem. Thanks for any help. Harry

  I suggest starting with the steps of troubleshooting in this document.  You already have some of them, I suggest you go through the list in order.  Don't forget to check the vents, as shown in the third stage of six, solution.

  If the above does not resolve the problem, then the message here can help.  Many people have had success with this.

• Why the Polish support page does not work?

  Why the Polish support page does not work?

  http://PL.consumer.Toshiba.EU/PL/support/home/support_home?

  I think the error message is pretty clear:

  + Service temporarily unavailable +.
  + The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later. +

• Why the 66 java update will not install on my iMac with el capitan?

  Why the 66 java update will not install on my iMac with el capitan?

  I recommend that you work with Oracle to see if they are aware of any problems with El Capitan, Java is their product and they would know better. But I was able to find this, it might help you:

  https://oliverdowling.com.au/2015/10/09/oracles-JDK-8-on-Mac-OS-x-El-Capitan/

  BTW, is there a reason you need Java?

• HP Photosmart 3310: Using only the black cartridge

  Suffice it for the most part to print text in black, but it seems to exhaust all my color at a speed that is ridiculous and expensive cartridges.  How can I use the black cartridge only?  I use an iMac and iPad (for remote printing)

  Hi @Cambridge29,

  I see that you would like to know how to print with just the black cartridge, save the color for color printing cartridges.
  I would like to help.

  I understand your frustration, I don't really. However, this printer uses same color inks when printing in black only. If run out you of color and kept black printing only, you provoquerez problems with the print head. It is the the user guide for your printer, refer to page 148. Series of all-in-one Photosmart HP 3300

  You can have a setting in the print driver to print in grayscale, which uses fewer colors.

  Application, go to file, print to display the print screen. Here is a screenshot where to access the settings of the print screen driver. Then you can save the setting as a preset.

  

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• HP Deskjet 690C: HP Deskjet 690C printing with only the black cartridge?

  I have an old deskjet 690C I have a while to use it. So since I need to print only the text is it possible to install only the black cartridge and print as ink backup? Also are there drivers for windows 7 64 bit? And finally this printer works with a parallel to usb on a modern PC adapter?

  Thank you

  According to me, the Deskjet 690C requires both cartridges to be present for printing, although you might have a cartridge empty color installed.  The 'ink backup mode' feature was added later at the 690c Deskjet printer.

  There is a Windows 7 x 64 driver through Windows Update, see the image below.

  Regarding the USB-parallel converters, these can be problematic.  The models in the posts here have been verified to work on Windows 7 x 64 by users in the forum.

  

• printing with printer deskjet 2050 using the black cartridge only

  printing with printer deskjet 2050 using the black cartridge only

  all solutions? PLIs answer me. thanx

  Hi d33com,

  Follow the steps below to set the black ink only.

  1. open the printing preferences (step 1)

  2. click on the Advanced button (step 2)

  3. click on the drop down arrow next to the print in grayscale to change black ink only.

  

• Impossible to install the black cartridge from HP 1515

  I bought a deskjet HP1515 printer and I have been using and filling of cartridges that came with it since, but recently, the printer simply begin to recognize the black cartridge. I tried all possible ways to solve this problem. I would like to know weather the cartridge does little or nothing if I can still do use before you buy another.

  Hello

  This document may be useful for you: an "Incompatible cartridge or"lack of ink cartridges"Error Message appears for the all-in-one HP Deskjet 1510 and 2540 "

  I hope this helps!

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Hi, I don't know why, why the Edit/Perspective option is not active. I cnnot use it.

  Hi, I don't know why, why the Edit/Perspective option is not active. I can't use it. This is a simple job: on the wall in perspectiwe I want to put the logo (point of view of Pentecost). I use grit in perspective and then want to use the option change/Perspective. The comends are grey (not active). I don't know why.

  I can't help you with questions of the Illustrator.  Maybe post in the Illustrator forum instead of the generic Cloud creative forum:

  Illustrator