Photosmart HP 7520: hp 7520 print settings

I was extremely satisfied with the quality of 7520 far color printing.  I now have extremely poor results, faded blurry photos.  I had lost my print settings and since I'm not technical decided to try to change the settings.  I have tried both letting the printer manage colors and Photoshop CS6 (x 64), but nothing works.  I have no idea how to proceed.  I hope that someone can help you.  I tried a lot of research online, but do not come up a solution.  I have attached a copy of the settings that I used recently to better explain my situation.

Thanks for looking and hope you can help.

Kind regards... Ralph

Hey ramirez.

@rb011 is away until Monday, but I can certainly help you down there.

If you don't see any color when you print the test pages this document describes How to fix the missing colors. The document is similar to the rb011 document, but it can't hurt to check that the document and measurements that were not in the original document.

If you are unable to print in color after following the above, cartridges or printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

Please let me know the results after following the above. If you are able to print or send to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

Tags: HP Printers

Similar Questions

  • Photosmart HP 7520: printing email

    I just got a replacement of HP printer because my old printer failed.  The new printer will not print my emails. I can print the files, but not email. At one point, he says a pop blocker could be on. I tried to remedy this, but without success. I have only a basic understanding of this type of technology.  Any help will be appreciated.  Thank you msibrox

    Hey there @msibrox

    Thanks for posting on the HP Forums!

    I would me more then happy to provide assistance regarding your 7520 Photosmart not printing not e-mails.  If the printer is able to print files, then the material in the printer is OK and you are looking for just a possible software problem.

    When affected by a software to deliver the best thing to start with, it is a uninstall and reinstall the software.  If you could post back and provide the version of the operating system on the computer, I should be able to provide instructions on how to uninstall and reinstall the HP software.

    If you are unsure what version of OS you have I provided below of links that will help you discover.

    If you are using Windows click here: Version of the Windows operating system

    If you use Mac click here: Version of the Mac operating system

    Thanks again!

  • Photosmart HP 7520: Printing of documents on paper Photo Photosmart HP 7520 AirPrint

    When you use airprint from iPad/iPhone to HP printer, the document is printed on Photo paper and not Std paper - how do you want to chaange this defect? THX!

    Try to check the settings of the tray from the printer and check if this may help you, those are the only parameters that may be applicable to the side of the printer, AirPrint itself does not offer such control.

    Of the printer, click the configuration option, and then select Preferences.

    Select printer selected tray, then select main tray and confirm, now try to print and check to see if that can help you.

    Shlomi

  • Photosmart HP 7520: printing the ascii at top of page

    Bought this printer about a year ago.  All that it worked very well, but recently.  When you try to print a large document, it will print the first pages with no problems, but all of a sudden it will start blank pages to print with ASCII characters in the top of the page or brands of black smear on the left side of the page.  It will go through about 20 pages of that until I can cancel the print job.

    I just tried to print two pages at a time and it worked for the first 20 pages and now he's doing it again.

    With the HP software on the computer, I looked to see if there was an upgrade of the printer and it came back that he was not.

    Basically, this printer has become useless!

    Hi @hitman02,

    Welcome to the Forums of HP Support! I read your post and see that you have found white pages with ASCII characters in the top of the page or brands of black smear on the left side of the page. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Please, try the following steps to see if it will help solve the problem.

    HP printers - Continuous Pages of strange or scrambled characters print in Windows.

    If you have any questions, please let me know what steps you have taken and the results. Thank you.

  • Photosmart HP 7520: All wireless network devices will lose connectivity after printing

    Dear all, 
    
        I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
    
    * Summary
    Wireless network unusable after sending one print to HP printer
    No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
    
    * Details
    Turn HP printer on.  ( wireless direct is off - never turned on )
    HP printer connects to working wireless network.
    Other devices ( phone/computers ) already connected and working.
    From any device, send a document to the printer.
    Printer prints document successfully.
    Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
    
    * Reproducibility
    Always
    
    * Work around
    Disconnect all devices from the network.
    Power off printer.
    Reboot Internet router.
    
    * Attempted solutions
    Removed wireless configuration.
    Factory reset.
    Added wireless configuration back.
    Powered on and off printer.
    
    * Printing tested with
    Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
    
    * Not tested
    Ethernet cable directly connected to router.
    
    * Internet Router
    Netgear CG 3700
    

    Number of brand and model of the router?

    These settings are to set up your printer wireless (or wired):

    • Stay connected to your router
    • Trouble printer status 'offline '.
    • Wake mode 'sleep'
    • All wireless devices stay better connected

    While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

    1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
    2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
    3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
    4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

    Additional measures to take if you continue to have the problem (if they are posted)...

  • Photosmart HP 7520: continues to receive downloads driver for a printer that I did more.

    How to stop obtaining HP drive downloads for an old printer.  I used to own a HP Photosmart 7520 printer but I replaced it with a printer HP Office Jet Pro 8710 2 months ago. I deleted all the HP programs related to the old printer and remove the printer from my list of Windows 10 printers and removed from the HP Support Assistant.

    However, I still repeatedly get updated driver for printer 7520 and it freezes the computer.

    How can I get them to stop in?

    Hello

    Where do you find all download driver? Maybe in Windows Update?

    Just a guess, see if maybe the following applies:

    http://support.HP.com/us-en/product/HP-OfficeJet-4630-e-all-in-one-printer-series/5305049/model/5305050/document/c05214529

    If not, please provide more details or a screenshot of the sample.

    Shlomi

  • HP Photosmart 7520 printer while a (flashing)

    I have a HP Photosmart 7520 printer all-in-one. It lights itself with flashing lights and an error to turn the printer power off and start again. I followed instruction and turn the printer off. Reverse in the printer of the room is lit, flashing with error to turn off the printer. So I unplug the printer. Help

    I had already unplugged printer and reboot so that solved my problem for now.

  • HP Photosmart 7520 printer all in one

    Earlier this year, I bought a HP Photosmart 7520 all in one printer and now I am about to buy a new office with an operating system of windows 8.  The 7520 printer is compatible with windows 8?

    Pap5, welcome to the forum.

    Here is the page of software and the driver for the printer showing the complete software for win 8:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5199463

    Therefore, it should work perfectly.

    If your problem is solved, please click "accept as a Solution.

  • Photosmart e: 7520 7520 HP e - AIO printer cannot copy of tray of food or a bed. PC fine.

    Cannot copy from the tray or a bed. Correct PC.

    Message says "make sure document inserted at bottom and try again"

    Hey @jimack,

    I see that you have some problems with the copy of your 7520 Photosmart e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

    If after the above, you can always not copy, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

    Please let me know the results after following the above. If you are able to copy or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Photosmart HP 7520: Storage of printer

    If a Photosmart HP 7520 must be kept for up to six months, what precautions should be taken?

    The cartridges must have all ink (at least somewhat) and remain installed in the printer.  Make sure that the printer is off since its own power switch and then wait for all the internal movements to stop before removing power.  Store the printer in a cool place, not subject to extreme fluctuations in temperature if possible.

    When starting the ORS printe after six months, you may need to run through a few cycles as described in the post here for cleaning.  If above does not solve the problem post here can help to retrieve your impression of good quality after long-term storage.

  • Photosmart 7520: Prints but won't scan Photosmart 7520 Win7 and Win10

    Very well printing - scanning fails in both directions, of PC to the printer and the printer to the PC.

    No form of works-y PC using the HP device Page or print and Scan doctor.  All two see the printer but when they try to connect give the message error «scanner communication can not be establshed...» »

    If you go to the printer itself and try a "Scan to PC" the printer sees name of the PC, but when you click Scan an error message comes up saying "no computer connected.

    Having exhausted all the recommended solutions: uninstall and reinstall the drivers. Run Selective startup without any service has been activated; Print and Scan Doctor (tells me that there is a problem of TWAIN, but even then gives error "can' communications Scanner...", even after the PC reboot and repeat the doctor P & s); restart the router method.

    The only method of scanning that work which means the network is scanning to E-mail.

    Any ideas?

    Hey @grunte1,

    Welcome to the HP Support forums!

    I see that you encounter some problems with the scanning of your 7520 Photosmart e-all-in-one printer to your PC for Windows 10 and that the printing and scanning doctor detects a problem with your TWAIN drivers. As TWAIN drivers refer to a component of the operating system, the only things I can suggest are updates or perform a system restore. In addition, I suggest contacting the one who sold you the PC or the Microsoft.

    If you have any other questions please let me know. If not, have a great day!

    If you appreciate my help, please let know by clicking on the icon below my post thumbs up.

  • My Photosmart HP 7520 now trys to save the PDF file instead of print it when I try to print it - it printed previously.

    My Photosmart HP 7520 now trys to save the PDF file instead of print it when I try to print it - it printed previously. What should I do to get it to print rather than life-saving?

    Clear the PRINT TO FILE option in Acrobat or Adobe Reader. It will be somewhere in the print dialog boxes.

  • Photosmart HP 7520: 10 Windows Error Message update for HP 7520

    Daily I get this message. This message started when I got a netbook XP approximately 1-1/2 years he is a. I was hoping that this message would have disappeared when I bought my new laptop running Win 10, but it didn't. I don't even have anymore of this printer.

    « Il problems were installing updates, but we will try again later. If you keep to see this and you want to perform an Internet search or contact support for further information, this can help:

    • Hewlett-Packard - hardware imaging, on the other - Null Fax - HP Photosmart 7520 series - error 0 x 80070490

    • Hewlett-Packard - hardware imaging, on the other - Null Print - series HP Photosmart 7520 - error 08024200 b ×"

    Until now what I was doing. I went into Device Manager, printers, and I uninstalled it. Then I went into settings, equipment and removed from the appliance.

    Upddate messages still appeared.

    In Device Manager, I noticed 6 unknown devices listed. When I went in their properties; events; There are mentions making reference to 7520 printer the latest in yesterday something on the installation of the printer. Should I uninstall these too?

    I do not know why this error message won't go away since I have no more of this printer.

    Helen

    Hello

    You simply uninstall the unknown device and the issue of the update of Windows no longer is, it's a reminder of the printer:

    http://support.HP.com/us-en/document/c05214529

    Kind regards

    Shlomi

  • Photosmart HP 7520: analysis of an attachment to the email

    Printer is configured with a connection cable to my PC and is also implemented for the wireless.

    Everything seems to work fine when I accept the option scan and it scans and said it stored the scan.

    When I go to send to my email address it processes claiming via the e-mail link electronic wireless (who has been varified and works) and the email arrives in my Inbox BUT without the document scanned as an attachment?

    Any suggestions?

    Concerning

    Coltrt

    Hey @Coltrt,

    Welcome to the Forums of HP Support!

    I see that you have some problems with the scanning to E-mail on your 7520 Photosmart e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. On your printer, click Web Services icon in the upper left corner of the display screen.
    2. Click settings.
    3. Click on delete Web Services.
    4. Click again on the Web Services.
    5. Click on accept and Yes.
    6. Configuring scan to E-mail.

    Please let me know if attachments come after following the above. If they do, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • PHOTOSMART HP 7520, THE PHYSICS UNIT DOES NOT RETURN 1 COPY FACE, HE'S STUCK ON 2 FACES

    I put my Hp Photosmart 7520 to print 2 against the screen of the device. Now, I can't get it back on 1 side. I can print 1 ratings from the computer, but if I print remotely and be sure to change the settings, it comes out 2 faces. I just want to be able to move behind the camera, but the setting will not allow a change?

    You try to disable it by using the set below? If this isn't the case, please check if it works.
    > Press copy on the home screen.
    > The copy preview appears.
    > Tap print settings.
    > The menu copy the settings is displayed.
    > Touch 2 faces.
    > Press OFF.

Maybe you are looking for

  • Block off diagram

    I'm working on a LabVIEW project for a probe station. The person who built the program already gone, and I'm learning about the structure of his project. In each of the category under VI folder, I found a few void as XX_Properties.vi VI. However, it

  • Dell PC with Vista does not restart

    I am only able to see the black screen with DELL in the Center. The F2 and F12 keys do not work. I've pressed CTRL11 but nothing works. The disk drive does not work so I can't use a recovery disk. Do I have any options? Discussions were merged. Doubl

  • Administration-turn on and password

    IM locked because of the power of the administration password... I tried 3 times and it now says system off and gives me a code... 74016275.i have the do45 HP 15 nr... Help, please.

  • HttpConnection and Php Webservice

    Dear All; I'm new in the development of blackberry, I know the basics, I have the mysql database on my server, I want to connect to this database or you can say I want to do the login form in my application. So I think I need to use the webservice wi

  • Tour of Smartphones blackBerry with DM 4.3 compatibility

    Does anyone know if the Tour 9630 is compatible with Desktop Manager v4.3?  I currently have an old 7130e that works just fine with v4.3 and upgrade plan to the Tower, but for me, uninstalling and reinstalling v4.3 is going to be a pain.  It is compa