Why the first takes 10 minutes to start?

Similar Questions

• I have an iMac at the beginning of 2009, which takes 5 minutes. to start. I did google and firefox as well as and VPN are the only things open. How can I speed it up?

  early 2009 iMac 2.66 processor

  OS X El Capitan worm 10.11.3

  249 GB available

  It takes 5 minutes to start and I get a lot of time waiting pinwheel

  I cleaned up google and firefox and checked for malware

  How can I speed it up?

  First start by going to system-> startup disk preferences and select your startup disk.  Sometimes after an update OS X startup disk becomes unselected for the firmware needs to address each possible boot device, including USB, SD card, DVD, network, etc... and wait before Timeout interface moves the next possible candidate.

  After that, start in safe mode

  http://support.Apple.com/kb/ht1564>

  This will NOT load any substance left 3rd, you have installed.  Many times, it is 3rd party additions that cause problems of this kind.

  You can edit the output of EtreCheck, who will analyze the someone

  https://discussions.Apple.com/docs/doc-6174>

  Look at the Applications-> Utilities-> Console of all frequently repeated journal entry, such as the process begins, process dies, starts, dies, starts, dies, wash, rinse, repeat also.  This type of failure can go under the radar of other controls.

• It takes 5 minutes to start to the internet, I think that something else is running when you start

  When starting my computer, the internet takes 5 minutes to get running .i think of something else is running in the background, I'm not that. then when I finnally get on the interniet, he died suddenly. This goes on all day. can someone help me find a solution. Dean of the thanks

  Sorry, but clarification, hear you the browser takes a long time to start and connect, or the actual Internet connection takes a long time to set up (wireless link maybe) and dips?

  What browser are you using IE9? If so, try another browser as a test as FireFox

  It could be Malware so eliminate this possibility first. To update your AntiVirus and scan and then download, install, update (updated by right-clicking on its icon and 'run as administrator' then go in the tab) and run a scan with Malwarebytes.

  Does this help?

• 3000 N200 starts the first time, but he will start for the third time!

  Hello

  My old N200 of 2 years has recently decided not to initialize the first time. Usually it starts the third time lucky this changes in the cold outdoors when it may take 7 or 8 will but or does not start later.  I think it started after that I left the machine running on battery power a day forgotten and the next day it took a few goes to start after plugging it load up.

  When it wont start the fan lights just like the Windows screen comes on and after a few seconds, it dies as if I had pressed and held down the power button as you would to turn off if the system was no answer, and he makes the same noise. When it finally starts the fan is silent!

  This one worked!

  Thank you very much

  I don't know that I have never done this? Certainly not intentionally. Well, I seem to have solved the problem by resetting the CMOS as described elsewhere in the forum. Machine boots first time every time now, so he must have had something to do with it. Or I also during the same operation was released and returned to the my 2 GB memory add on and I think that may be related to poor startup performance if it is not inserted correctly.

  What a relief and after being where I bought they had no idea and wanted to send it away etc etc and I pay £11 a month for such a service, I had a lot more less than an hour on this forum

  Thanks for the reply

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Why Autocheck.exe takes 3 + minutes at startup

  Salvation;

  I've recently set up a new build (the end plug) and after installing the win 7 updates that were available, I started having a recurring problem starting sloooooooooow.  I seem to have two options now, and none of them are perfect, that's why I post here.

  1. I can restart and wait 3-4 minutes, and when windows starts, everything seems fine
  2. I can remove autocheck autochk * of the BootExecute registry entry, then it starts fine, but then windows is locked for about 3 minutes after logon. Nothing does.  After that, it works fine.

  In the investigation of this situation, I blame first SMSSinit, but I discovered later that this routine is rather a chaperone for the other processes that are running before Winlogon support functions of escort.  With the help of MS SDK, I found that it is Autochck.exe who is the culprit, taking 200-220 seconds on each boot.  I have done the following (and more) for this problem:

  1. check all readers to forest Sales - none found
  2 DAB check on all connected not discs - no error found
  3 disabled Checkdisk in "task manager".
  4 disabled Checkdisk on the register (when I do that, I get the scenario 2 above)
  5 restart the computer in every way that I can imagine
  6 tried a repair of windows with my stick UEFI (no love - don't say it found no problem)
  7. I tried to go back to a previous restore point (I only had one and it has not resolved)
  8 deleted all the updates of windows that I did (and all Win updates are set to manual only)
  9 autochk.exe caught another install and put it in the folder Windows/system32 (after correct ownership of both) with a new name autochk_safe.exe and made the registry BootExecute entry to this application checkdisk (thought that was a smart test I found on another forum)

  10A ran sfc/scannow - no problems found
  11 set the registry BootExecute entry "" autocheck autochk / k: C / k: M / k: S k:R k:G * '. "  I tried this (which should skip autocheck at startup for C, G, M, R and S readers), but it changed nothing.  And it's a deactivation of all disks in the system.

  If anyone knows what steps I can take here to stop this autocheck scope and not suffer the consequences, it would of course be appreciated.  And Yes, I know that I can do a thorough cleaning and reinstall, but it isn't necessary that something is the cause and needs to be identifiable and solvable IMO.

  See you soon ~
  C

  Update Specs:
  Windows 7 Pro 64-bit SP1 (all the critical updates installed until I removed them to try to solve this problem)
  ASUS X 99 Sabertooth Mobo
  CPU i7 - 5820 k
  M.2 SM951 Samsung 256 GB (drive)
  Corsair ForceGT 128 GB SSD (secondary drive and drive work when running on hand)
  4 TB WD Red
  4x4TB red WD in a RAID5 configuration (fully initialized and works very well)
  Crucial RAM - 2 x 8 GB - 2133 Mhz
  FireGL V8700 GPU (the elder in this system of 2010) Pro
  EVGA Supernova 1000 G2 PSU

  At this stage of installation the installation program has not yet copied all files or written a basic configuration register.  You can see the drive because the drivers are loaded into memory to allow the Setup program see the disks at this time there hadn't even told it the installer where to install Windows, how he knew where to put the files?

  This can be useful:

  SysInternals LoadOrder v1.0

  (Works on Windows 7)

  John

• Why - what is take a minute to connect to an Apple TV via AirPlay?

  We have recently updated our iPad Pros 10.0.1 and one of our Apple TVs to 7.2.1 (he is described as the Apple TV software version). We found that the Apple TV would go to a white screen as it linked. See how we were minutes a meeting where it would be necessary, I ended up swapping on the Apple TV with another. The second APPLETV logged a lot more quickly. I took the first Apple TV at the office to work with and test. I found that it it takes 30 seconds to act as AirPlay logs when it goes to a white screen. It takes another 30 seconds before displaying the iPad screen connection. It seems very long.

  Hello. You are maybe not on the same network as the ATV WiFi slow? In this case, you can use AirPlay-to-peer that implements discovered via Bluetooth (must be activated on the iPad). The discovery of Bluetooth is slow because it has to wait for the answers. Connection may be slower, because the devices to implement a direct connection via an unused WiFi channel. 60 seconds is a bit long, however.

• Computer XP takes several minutes to start

  When I turn on my computer, it takes several minutes for all programs to load and my upcoming desktop icons.

  * original title - startup appears extremely slow *.

  Hi ChrisHood,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• My computer takes 20 minutes to start and also has a black screen

  Hello world

  I have a Dell Dimension 9200 and recently every time I start my computer or it reboot, it takes 20 minutes to get to the desktop and also has a black screen. This issue has occurred only recently and I don't know what is the cause and so advice would be welcome.

  Other strange things include all my system restore points are missing and so I can't return the operating system to a previous date when it was working properly.

  And when I did a test on the hard disk, one of the internal drives have had a "Fail" result - Code 7 back. I don't know if this was caused by a virus or is the result of a mechanical failure in the hard drive itself.

  Thank you very much.

  Gordon

  

  Bev.

• Problem of temporary file in the database takes a while to start the database

  Legends of dear,

  I am facing the warning next or problem with R12.0.6 64 bit and 10.2.0.3 databases in a linux environment

  Mar 20 18:24:23 Oct 2015

  *********************************************************************

  ATTENTION: The following temporary tablespaces do not contain any file.

  This condition can occur when a backup controlfile

  been restored.  It may be necessary to add files to these

  storage spaces.  This can be done using the SQL statement:

  ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE

  Furthermore, if these temporary tablespaces are no longer

  necessary, then they can be recessed.

  Temporary tablespace is empty: TEMP3

  *********************************************************************

  When I questioned my database_properties

  Select * from database_properties where name like '% TEMP % ";

  

  Journal Alerts

  Mar 20 18:24:23 Oct 2015

  Completed: ALTER DATABASE OPEN

  Mar 20 18:24:25 Oct 2015

  Additional checkpoint up to RBA to RBA [0x68e.5c2b5.0] [0x68e.5c26c.0], current journal line

  Details of the Temp file

  /Oracle/prod/DB/apps_st/data/temp03.dbf	1	TMP4
  /Oracle/prod/DB/apps_st/data/temp04.dbf	2	TMP4

  Because of the warning above when I give 'start-up' in "sqlplus" or start the database using the addbctl.sh script there is a huge gap between the following

  SQL > startup;

  ORACLE instance started.

  Total System Global Area 2147483648 bytes

  Bytes of size 2074112 fixed

  872417792 variable size bytes

  1258291200 of database buffers bytes

  Redo buffers 14700544 bytes

  Mounted database.

  ..............

  ................

  ..............

  .............

  ...........

  .......... (LOCAL TIME - 10 to 15 minutes)

  ...............

  ...............

  .................

  ........

  Open database.

  Please suggest how to deal with this.

  Thank you

  Knockaert

  Hello

  It is a question of pure database. Not much relationship to the EBS.

  Anyway, as stated in the warning, you must add a temporary file in the tablespace TEMP3 or drop the tablespace if you do not need.

  Can you post the full alerts log part, which takes 10 to 15 minutes?

  Kind regards

  Bashar

• How can I get the first pro trial subscription to start

  I have subscribed to a trial subscription.  I think I downloaded successfully the first pro - there is at least one message on the initial screen of .saying what he is up to date.  However, there is no place here after the Premiere Pro icon where you can click to open, as shown in the tutorials.  What I am doing wrong?

  This is the reason why you are unable to start. First pro is compatible with 64-bit computers only.

  You can check the link for more details below:

  https://helpx.Adobe.com/Premiere-Pro/system-requirements.html

  Note:

  If the processor is 64-bit, and if you had installed 32 bit OS, format it and install 64 bit OS.

  If the processor is 32-bit, you must get the 64-bit processor.

  or you can download version CS 4 and use it as of the trial that is compatible on 32-bit computer. However, it is not available for purchase.

• X 200 takes ~ 20 minutes to start

  Hi, I have a laptop Lenovo X 200, which has recently begun to take around 20 minutes to start.

  If he is asleep/sleep, there is no problem. This only affects the cold boots.

  By pressing the power button, the lights come on, but the screen remains blank. Only 20 minutes more later BIOS start-up screens as wellas the computer starts normally.

  He had no recent software or BIOS upgrades before this fault.

  Appriciate any help.

  Bendjombe

  Thanks for the responses guys, unfortunately none of them worked. However, I managed to fix the problem anyway.

  It turns out that a simple reset CMOS battery solved the problem. I have updated the BIOS too in case it was a bug in the previous version.

• Why the first keep failing executives instead of timecode?

  Everything was fine before - first used real timecode by default. Lately, I think that someone else has used and something of passed to frames instead and now everytime I open the first, the chronology is reuse frames instead of the time code and I am constantly having to switch back. And if I use the media browser, each element is in both frames and if I turn it on to the time code, the next clip I select will returns to executives.

  Why would he do that?

  In your project settings, check that the timecode is defined as below...

  

  Neil

• Why the first tab is not having option close

  When multi tab open all the tab meet option for closing but when we begin to close the tab to the right and reach the first tab it does not display an option to close the tab

  When you get down to a single open tab, you cannot close this tab. If you want to close this tab, you must close any Firefox window.

• Why the download takes so long?

  I downloaded CC, but download the apps takes extremely long.

  It is entirely up to your internet connection.

  Mylenium