Why the machine didn't need to reboot after updates now?

Similar Questions

• Why the airport Time Capsule for P/W after update to 7.7.7

  Time Capsule ask P/W when I click on it in the Airport utility to see whats connected to it, but never recognizes the P/W or back with the icon to forget.

  He returns to normal after a disconnect and a return to the restart card. This happens since the latest firmware update to 7.7.7.

  Once the Capsule is back to normal and you can access the settings in AirPort Utility, my suggestion would be to delete the current password on the Base Station and add a new password. It worked for me with the same question, and it might for you as well.

  Make sure you remember the password in the keychain in your Mac is checked, and then click Update at the bottom right of the window to save the new settings.

  

• Why the subjects in my project RoboHelp disappear after update to RoboHelp 2015?

  After the upgrade to a RoboHelp 10 to RoboHelp 2015 project, all the themes of the project are deleted when the subjects are then updated. The project is a document linked FrameMaker - updates as planned, but when I update the headings, one of two things occurs:

  1. Links are broken and all the topics appear in the 'Broken links' folder, or
  2. All subjects simply disappear.

  (Running Adobe Tech Comm Suite 2015 on Windows 7, 64-bit; RoboHelp being updated to v12.0.2.384; FrameMaker, set updated to v 13.0.2.433.)

  I had a few successful update of the subjects if I update separately each 'chapter' in the book, but if I use the option "update all the ', the results are as shown above. And, as you can see, the results are not compatible. This happened with two projects that I have converted in 2015 of RoboHelp.

  I find no information about it in the forums. Screenshot below is included to show the effect of ' update all ' in a project.

  I appreciate any assistance with this annoying quirk!

  Carole

  

  Hello

  I tried your steps exactly but it works very well at my end.

  Try this: in the project folder there is a file named .cpd, delete this file and re - open the project in RoboHelp and then update the book connected to FM.

  Try it and tell me if it solves this problem.

  Kind regards

  Manu of FIFA

• I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

  I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.

  Then search for the string "browser.newtabpage.enabled" right click, click Reset.
  Also search "browser.newtab.url" right click, click Reset. Restart firefox. Now it must wok

• Satellite L300D BSOD on reboot after updates to Win7 64 bit

  Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

  I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
  I'm open to good ideas.

  Thanks much for this information.
  Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

  Welcome.

• My subscription Creative Cloud amounts and the teacher would not be repeated even after update payment information

  My subscription Creative Cloud amounts and the teacher would not be repeated even after update to payment information. I tried many times in the past two months, updating credit card information and I was never renewed. Subscription keeps saying expired beyond the 24 hour mark it says it will take. I have double and triple checked the information of credit card and have recorded several times. I also never get an e-mail confirmation or an e-mail saying that he had a problem. It is also very frustrating that it doesn't seem to be a customer service number to call especially for customers who have paid for the subscription of creative cloud. Help, please!

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please

  First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please!

  Hi RC,.

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Why the chase bank wants a for a version update of Safari until I open my account?

  Why the Chase Bank requires an update of Safari. In order to view my account?

  What version of OS X and Safari you have installed? What Mac?

• SP 2 update fails in the third stage during reboot after update

  Downloaded SP2 without problem.
  Update is done without a problem.
  PC re - starts automatically.
  Poster "Phase 1/3, then Phase 2/3 SP2 installation Phase 3/3.»
  100% of Phase 3 and sits there for a long time.
  Later displays "Installation failed, removing all SP @ updates"
  Sits with the above display for a long time.
  Re-boots at the login screen.

  That is what it is.

  HP Pavilion S3100n, Vista Home Premium 32-bit with all updates prior to SP2.

  Hi Keithg,

  Thank you for visiting the Microsoft Answers forum.
  As one of the troubleshooting steps I recommend trying to install the SP1 update as a standalone, follow these steps.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 (http://support.microsoft.com/kb/935791/) how to obtain the latest Windows Vista service pack

  Solution 2: Run the system update readiness tool

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

  1. Click Start
  2. In the Search box, type system, and then click System in the programs list.

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System .
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System .

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can download the preparation tool system update from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

  The following files are available for download from the Microsoft Download Center:

  Windows Vista

  Download the Windows Vista package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27 & amp; DisplayLang = en)

  Windows Vista for x 64 systems

  Download Windows Vista for the systems based on x 64 package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d & amp; DisplayLang = en)

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Best regards, Joseph.N sunny. Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 32 bit Auto reboot after update Nag

  Hey guys...  Why my pc reboots after Windows updates?  The HORSE appears but never does the County down and restarts.  I check group policy and "No Auto restart with logged on user" is not enabled (still set to not configured).  I checked Regedit HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWSUPDATE\AU\

  NoAutoRebootWithLoggedOnUsers is undefined.  We have wanted this to put on for our users, but can't seem to make it work.  As I said, the HORSE appears and you can postone, but if you do not touch the pc never restarts.  FYI, we use the server 2008R2 Standard GP.  Thank you

  Hello Makinsey,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• I can not adjust the size of the window for Firefox on OSX 20 after update

  After updating to the latest version of FF, I can no longer adjust the size of the window. I tried to click and drag the four corners of the window, but it remains the same size. Before the update I could adjust the size of the window. I tried rooting around in the topic: configuration settings but have not been able to find something that would determine the size of the window being locked to certain dimensions. I have also reset firefox to its default settings and this does not resolve the issue.

  Execution of OS x 10.6.8 with Firefox 20.0

  Try to disable the use of Firefox graphics acceleration hardware.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Firefox menu > Preferences > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the problem is solved?

  See also: starting today, Firefox windows is more scaleable. OS x 10.6.8 Firefox 20.0

• computer won't reboot after updates missing or corrupt ntoskrl.exe

  I have a HP pavillion laptop - I have upgraded to Vista Business (so I than the cd) the computer failed to install service pack 1 for ever. He kept getting an error which is ambiguous in the research. However, one day last week he decided that it would update on its own. After the update I get a message that indicates that the ntoskrl.exe file is missing or damaged. The machine does not start without failure or other mode. I got started with the disc once. I thought that the problem has been corrected - and then I restarted the computer a few days later and it happened again. I succumbed to get it to load all the. It is said that it can not be solved. The only time where this morning, I had to complete the restore of the system, the machine has restarted and began its count of files (I think that some 97000 files + as the update of windows) and loop to the same error message. I got to a command prompt and looking for help on what to do next. Thanks in advance for your help. In addition, because I bought the Vista upgrade separately - do any free support from MS? If so - where should I call? Thanks again.

  Hi Upinthenight,

  Thank you for using the Microsoft Vista answers Forum.

  You can follow the steps mentioned below and let us know if it works:

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. once we are on the command line, type Bootrec.exe /fixboot, and then press ENTER.

  Go to your second question on the support options for Windows Vista; Phone/Chat for Windows Vista support is paid but the free support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009.

  Thank you and best regards,
  Abdelouahab

• The crashing apps and battery drains quickly after updating iOS 9.2

  Well, that's what's happening: before upgrading to iOS 9.2, no app crashed, my battery lasted all day and everything was fine, but after update, applications such as Facebook, YouTube, Maps, even (Yes, stock cards, no Google or whatever it is) kept crashing and now I have to charge it twice a day to operate. Also, I noticed it worked a bit hot too, don't know if that is related to the battery issue, but he started to be going after the update, before, he had run cool, so I don't think is a hardware problem. If there is a solution, please let me know, because it's pretty boring, gtting thanks in advance.

  You must close information apps, iOS 9.2 takes about 5 GB of storage, so I think that you have a 8 GB model

• EDGE OF THE ANIMATED FILES NO LONGER AUTOMATIC READING AFTER UPDATE!

  That's happened? Since installing the obligatory toold, update this morning EDGE ANIMER FILES will BE No. LONGER AUTOPLAY AFTER update! This is crucial, I have direct client work that is affected by this!

  Please answer Adobe, edge and oam HTML5 files are a new feature in fantatastic, but you just put a spanner in the works with this new update. Help please!

  We have confirmed there is a problem with the content hosted by the iframe with the v25 tools. It is, unfortunately, the mechanism used to place files .oam. As mentioned above, a possible workaround is to create a framework and then use Control Panel overlay of the web to a folder with your output Edge animation, instead of putting a file .oam.

  Thank you

  Neil