Why the my linear encoder is only tend to read negative?

Similar Questions

• Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  I have a second clip 24 I have stratified in Ps and when I import the psd in Pr THE SEQUENCE IS STILL ONLY 10 SECONDS!

  How can I change this?  Why does this happen?  I really need to know as soon as possible.  I have a video project due this Wednesday (certainly that's an AV class where I learn just PR.  "But I can learn VERY QUICKLY!)

  Thanks for your help.

  -OSXniCKels

  Just in case I wasn't clear in my last line ' just click-and - drag on the tail of your.» PSD to set the desired time,' once you have imported your. Just PSD (for example, images), you can drag in the timeline panel, click and drag on the right margin (the tail) and stretch his time because it takes.

  Now, if you have imported as a sequence, open the timeline of the sequence and do the same thing.

  Normally, I will put my Edit > Preferences > again I think will be applicable, make my Import, and then with the Info Panel, just change the duration in office.

  Good luck

  Hunt

  PS - Welcome to the forum.

• Why the Apple Music Radio plays only for a short period?

  Why the section of Apple's Music Radio play that for a short period and then stop at the end of a song? Sometimes after thirty minutes, other times, it will play for three hours. I can restart the music by pressing Pause, and then move to the next selection, then play. I have a start 2011 15 "MacBook Pro, El Capitan 10.11.1 and an Airport Extreme. All other aspects of iTunes and Apple's music work very well.

  It seems that your connection to the music of Apple streaming servers is interrupted for some reason any. I did have problems with Beats1 radio a break at any time that I have been listening. You can try to reboot your router if you do not have and test on ethernet vs wifi to see if that makes a difference.

• Why the node formula Eval gives only outputs 9?

  I am allowing the user to input so values and formulas he convert raw data to data acquisition, but output from the Eval formula node values give me only 9 values in table. I don't know why, because I'm him giving 16 formulas, 16 outputs variables, variable input 16.

  Seems to work fine for me on LV10.  I see you have an indicator of the bunch, if you use ArrayToCluster don't forget to right click and set the size of cluster on 16.  When I see 9 it is usually my first assumption.

• Why the Microsoft Expression Encoder 4 screen Capture will not open?

  I don't really know where to put this so if this is in the wrong section, sorry.
  I installed this program several times (several versions) and whenever I click the link it does not open. Nothing happens. Microsoft Expression Encoder 4 (the editing program) works fine, but the screen capture program wont open. Why?
  It does not open with administrator either. I use Windows 7, btw.

  So after changing back to extended desktop, I could restart the program, so I thought about it, but it would have been nice if she had worked in eyefinity mode. Well.

• Why the 'AccountDetails' window give me only backward, finishing, cancel the options when you try to create a Firefox Sync account and does not allow me to set up complete?

  I'm trying to set up Firefox sync. I go to tools > configure sync.
  The box opens.
  I click on "create a new account. I have complete my account information. The only options I give at the bottom of the box are 'Back', 'End', 'Cancel '. There is no button "next". I click on "Finish" and the box disappears. "Even when I try to click on" Synchronization Options "nothing happens.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why the application Manager shows me only version apps CS6? How to install CC versions?

  Everything on the site leads me to believe that the versions of the CC of the aplications are current versions, however, when I open the Adobe Application Manager, I can only see the CS6 versions. Do I have to uninstall something and then reinstal? What should I do to install the CC versions?

  Versions of creative cloud will be unavailable until June 17.  Please see the following related discussions.

  http://forums.Adobe.com/message/5361832#5361832

  http://forums.Adobe.com/message/5374914#5374914

  http://forums.Adobe.com/message/5381796#5381796

  You can also find more information in our FAQ creative cloud at http://www.adobe.com/products/creativecloud/faq.html.

• The most effective way to log data and read simultaneously (DAQmx, PDM) high data rates

  Hello
   
  I want to acquire the data of several Modules cDAQ using several chassis to
  high data rates (100 k samples per second if possible). Let's say the measurement time is 10 minutes and we got a large number of channels (40 for example). The measured data is written to a PDM file. I guess, the memory or the HARD disk speed is the limits. For the user, there must be a possibility to view the selection of channels in a graph during the measurement.

  My question: what is the best and most effective way to save and read data at the same time?

  First of all, I use an architecture of producer-consumer and I don't want to write and display the data in the same loop. I expect two possibilities:

  [1] to use the 'DAQmx configure logging.vi' with the operation 'journal and read' to write the data to a PDM file. To display the data in a second loop, I would create a DVR samples documented and 'sent' the DVR for the second loop, where the data will be displayed in a graph (data value reference). This method has the disadvantage that the data of all channels is copied into memory. Correct me if I'm wrong.

  [2] use 'DAQmx configure logging.vi', but only with the "journal" operation to write the data to a PDM file. To view the selected data, I had read a number of samples of the TDMS file in the second loop (I'm currently writing the TDMS file). In this case, I have only one copy data from the selected channels (not), but there will be more HARD drive accesses necessary.

  What is the most effective and efficient solution in this case?

  Are there ways to connect and read data with high frequencies of sampling?

  Thank you for your help.

  You say that the measurement time is 10 minutes. If you have 40 channels and you enjoy all CHs at 100 kHz, it is quite a number of values.

  In this case, I always try to approach under the conditions of use. If a measure is only 10 minutes, I just connect all PDM data and create a graphic module that could be in the same loop of consumers where connect you the data. You can always work on the raw data files big offline afterwards, the extraction of all the information you need (have a look at the product called NI DIAdem: http://www.ni.com/diadem/)

  The main issue is that the user needs to see in the graph (or perhaps a chart can be useful too). Lets say that the graph is 1024 pixels wide. It makes no sense to show multiple data to 1024 points, Yes? Every second will produce you 100 data points k per channel. What is the useful information, which should see your username? It depends on the application. In similar cases, I usually use some kind of data reduction method: I use a moving average (Point by point Mean.VI for example) with a size of the interval of 100. This way you get 100 data points of 1000 per channel every second. If you feed your graph every second with these average values, it will be able to data points in 1024 of the store (as a default) by channel (curve), which is a little more than 10 minutes, so that the user will see the entire measurement.

  So it depends on the frequency at which you send data to the consumer. For example, collect you values 1024 by iteration of the producer and send it to the consumer. Here you can make a normal means calc or a bearing (according to your needs) and he draw a graphic. This way your chart will display only the values of the last 10 seconds...

  Once I programmed some kind of module where I use a chart and not a graph, and the user can specify the interval of the absolute timestamp that is traced. If the data size is larger than the size of the chart in pixels, the module performs an average calculation in order to reduce the number of data points. Of course, if you need to see the raw data, you can specify an interval that is small. It all depends on how you program zoom functions, etc... In my case I hade a rate of 1 Hz, so I just kept all data in RAM limiting the berries to keep 24 hours of data, so that technicians could monitor the system. In your case, given the enormous amount of data, only a file read/write approach can work, if you really need access to all of the RAW data on the fly. But I hope that the values of working capital means will be enough?

• Why the iTunes Store WATER only looks at only generic music, iTunes Store in other regions free movies soundtracks

  Why the iTunes Store WATER only focuses on the music of generic that are broadcast on the radio on a daily basis? What happened to Bo film and video games? Google tells me what I'm looking for are already on iTunes, but they are still on the US store.

  It's a pain to switch every now and then the stores, and I'm not really planning to go through this path. Apple will improve and pay attention to the quality over quantity in this case? I waited to see improvement, but it seems that Apple UNITED Arab Emirates are too busy with copy paste what is on the radio lately.

  We hope to see positive reactions.

  Apple does not decide which can be sold in each country.  They can't sell what the owners of distribution for music rights allow them to sell.

  You can leave your comments for Apple at http://www.apple.com/feedback if you wish.

  It is not legal to use iTunes US store, unless you're physically located within the borders of the United States this is true of every country and their iTunes store.

• Why the Tecra M11 - 11 M got only the 32-bit version of Windows 7?

  Why the Tecra M11 - 11 M has only the 32-bit version of windows 7 and 64-bit?

  Surely the i7 and 4 gb can deal with applications and the 64-bit version would allow a more efficient use of computing power.

  Thank you very much

  Hello

  You can try the 64-bit Vista for Windows 7 64-bit driver, most of them must be compatible. I don't know why Win 7 64 bit drivers are not available, there is a user forum and nobody can answer you, I guess.

  welcome them

• Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Chuck72352,

  Hello! It's my understanding you need to add the files separately to Source Code control with the .lvproj file.

  This is a lot of information on Source Code in LabVIEW control practices.

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?

  Dear all,

  I bought a X 230 (i7) laptop.  I found that has removed the battery from the laptop and use only the power supply with the X 230 Notenook.  The CPU frequency will said to 1189 MHz.  It will not change no matter how the laptop program is running.  The CPU frequency will increase to 2.9 GHz or up to Turbo when the laptop with battery or battery and AC power.  Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?  This is not good.  No matter which setting in X 230 Notebook need to change?  Help, please.

  Welcome to the forum!

  What you feel is the factory default setting. You may or may not be able to get around using an adapter 90 w instead of a 65W one, but I've generally not recommended to use the ThinkPads without a pile of work.

• How to install the memory available for the video and why my computer say I have only 2 GB of memory usable on 4 GB

  Windows says experince installed memory usable GB 2.0 GB of video memory available 1296 4.o 0. How can I fix it? Also, so that you know the hard drive is clean only win.7 of 64-bit operating system and programs plant that was installed by acer. It's a s - 3 acer ultrabook. So my main question would be what uses that amount of memory and what can do to free up? And why the video always says it has more than one GB of available memory, but 0 is installed?

  Have you read this magazine for the laptop?
  http://www.notebookcheck.NET/review-Acer-Aspire-S3-391-53314G52add-Ultrabook.81619.0.html

  And this one for the Intel HD4000.
  http://www.notebookcheck.NET/Intel-HD-graphics-4000-benchmarked.73567.0.html

  The intel HD4000 is pretty good, perhaps the best card onboard graphics (not sure
  AMD integrated graphics last how compare), but this is not always suitable to the
  Games of high specification, except on low heat.
  There may be problems with some older games as well because sometimes they do not recognize the
  as a viable option, integrated graphics or because there is no dedicated VRAM.

  You must update all the drivers on the ACER site.
  I don't know what you need from AMD drivers for. There should be nothing AMD on your machine.
  .

• Why the subscription only now?

  Why the database subscription, only? Most people like me cannot afford to continue paying monthly subs

  . Sorry Adobe, I joined yesterday but be uninstall the program today and stay with my old Photo Elements11 shop

  I understand your pain - many users would like to see a perpetual license to CC option.

  You can also get this plugin to extend the functionality of the elements in the realms of Photoshop:

  http://ThePluginSite.com/products/elementsxxl/

  Or switch to an alternative like Photoline (www.pl32.com). For digital painting Krita (open source and free) is great. https://Krita.org/

  GIMP is also open source and free GIMP - The GNU Image Manipulation Program