Why the path I create in Illustrator CC never rest in place?

Similar Questions

• Is the path of export to illustrator the only way to get a psd w / clipping appears in Illustrator?

  I'm wasting time having to put my image in Illustrator, then manually align the clipping path. You used to be able to save a file with a clipping path an EPS in photoshop, select "maintain vector data", place it in illustrator and cmd-press Y to see the clipping path. I need the image and clipping in Illustrator and image path is too complex to create a mask of Illustrator. I tried to save it as an EPS but "retain vector data" is gray.

  Save a PSD. If you need access to the path, then incorporate him (the image in Illustrator).

  If you just want to use the path for cutting, set it as a clipping path in Photoshop.

• Why the Adobe PDF Create add-in is no longer supported by 25 FF?

  I use 25 FF on Windows 7 Pro x 64 system. Recently, I did a reinstall of the OS and with it a reinstall of Firefox. After importing my old profile, I noticed that the Adobe PDF create button was missing. It is a very useful application in my daily work.

  Going to the Add-ons Manager, I noticed that the Adobe Acrobat - create PDF 1.0 add on is disabled in 25 FF. Why support has been removed for this?

  I tried to use another Add on PDF, but it caused the browser hanging and it had to be removed. Is there a reliable option to save a web page to PDF? (other than the use of a Mac).

  This means that the addon message must be updated to be compatible with the latest version, if this addon is essential, you can revert to a previous version.

  • Install an older version of Firefox
  • Re-enable the Add-ons that have been disabled when upgrading from Firefox

  If the second section does not work, the foregoing applies.

• Need to change the text in the pdf file created in Illustrator CS6

  I need someone else to be able to change the text in a pdf file I created from Illustrator. They have full acrobat should be able to change it. I tried myself to test before you send it, but it does not work. The original file has been created in Illustrator CS6 and saved in pdf format (text not created contours). I opened the file in acrobat and try it saved as file extended to be able to change the text but not luck. You will be able to highlight the existing text and replace it. I tried to change the text of the tool, but rather only a selection box around each line of text, it puts a selection box around the text. I can highlight the text and delete it, but I am unable to change it. Each individual text line should be editable. Is there something I need to do differently in Illustrator so it can work correctly in Acrobat?

  If she help him file is a calendar and they need be able to change the dates and events that are already there.

  This really isn't an appropriate use of Acrobat. You should all use the same editing tool (i.e. Illustrator).

  Extension of files reduced the amount of editing Acrobat can do, it does not increase it.

  The editing of text in Illustrator tool would be to edit the text Document. There is no guarantee that it will divide nicely in lines, it is trying to help by making the text of paragraph.

  In theory, you can use a form for this (fill in the blank for dates) but really, you should use the same tool. Not necessarily Illustrator, more Excel or specialist software calendar.

• Why the path of motion is different!

  Hi all

  I have a query that is running satisfactorily in TESTING, but takes a lot of time in the PROD.

  SELECT * FROM MTHLY_PROD_BASE WHERE START_DATE > to_date('1/1/2013','mm/dd/yyyy') start_date = AND < to_date (' 1/1/2014 ',' mm/dd/yyyy')

  MTHLY_PROD_BASE is a view that contains some tables and views that make the summons and the underlying data groupings.

  I have a plan to get for her TEST and PROD in jpg format, but I'm not able to reach here as the 'Insert Image' button is inactive for me. How can I reach them to explain my problem correctly?

  There was some memory added around a week to the DB server to improve the performance of another data base there, but since then the DB in which I ran the query is a bad performance.

  Data for the underlying tables referenced in the query, test is the same as in PROD, but the plans are different.

  I need to know what factors can lead the path for one request to change, so that I can investigate what else might have changed/East fell into the PROD?

  Thank you

  Hi all

  I found that the problem was due to the fact that main table is highly fragmented, which made the FULL table scan to take a lot of time and therefore probably caused the change in the path.

  The following query revealed fragmentation:

  Select a.owner,a.table_name,round(b.bytes/1024/1024) CURRENT_SIZE_IN_MB,.

  Round((a.Num_Rows*a.avg_row_len)/1024/1024) ACTUAL_SIZE_IN_MB,.

  Round(((b.bytes/1024/1024-((a.Num_Rows*a.avg_row_len)/1024/1024))/(b.bytes/1024/1024))*(100-a.PCT_FREE),2) FRAG_PERCENT b, dba_tables dba_segments

  where a.owner = b.owner and b.bytes/1024/1024>100 and b.segment_name = a.table_name

  I have rebuilt the table/index using "alter table move" and orders "alter index rebuild online" and things are good now.

  Thank you all for giving helpful suggestions and I'm sorry, I still do a follow-up with the guy who gave me plans to image format, he's too busy new do explain plans and provide me with text :))...

  Thank you very much.

• Add all files in the path when creating file folio in Folio Builder

  Hello everyone.

  I'm using InDesign CS 5 and the creation of folio for iPad 2. My Folio builder was working fine until last week, but all of a sudden I see a change in the way it behaves. When I update the files in the Folio Builder, it adds all the files in the path of access (not only the links in the file), including source of PSD files and other related files that I have never used in InDesign, do folio file will increase in size. Can someone help me please how do I remedy this situation?

  I thank you very much in advance.

  I look forward to your solution.

  You have an HTML file in there? If so, put it (as well as its assets) in its own folder.

  Bob

• Why are the colours of the designs I create in Illustrator are not the same when I open them to animate?

  It becomes quite boring. I create characters in Illustrator, save in the library, and when I import them into CC animate colors are disabled and that sounds weird. (I used the Gaussian blur and opacity much could this be the problem?)

  Thank you!

  Hello

  To keep the drop shadow, inner glow, glow external and Blur Gaussian HAVE editable effects as Animate filters, Animate matter the objects to which they are applied as an animated clip. If you try to import an object with these attributes as something else that a clip, Animate shows an incompatibility alert and recommends importing the object as a clip.

  To ensure the continuation of this test.

  • In Illustrator. Convert your shape a symbol.
  • Then drag and drop this symbol in the library panel to synchronize it with the CC library.
  • Now go to animate CC and synchronized use symbol from the library CC Panel and you will be able to see the effects.
  • In the import dialog box, please check "Import unused symbols"

  

  Kind regards

  Vivek

• Why the form I created automatically t complete line down?

  I created a form with columns. People filling out the form in one of the columns, enter an x to indicate the status of the project (to come, on the target, behind, not known.) All fields are working well except one. In this special column "not known", it automatically fills all columns with a 'x '. No idea why and how can I fix it?

  In this case, make sure that your fields have a unique name. The fields with the same name will automatically have the same value.

• Transparency of the dynamic object created in Illustrator

  Hi guys! Someone smarter than me?

  1. I created the vector Illustrator object with opacity masks:
  2. I inserted the .ai file saved {by dragging BR} in Ps as smart object.

  But look at the Sun. below: you can see, that the area hidden by using Ia - mask opacity is 100% Demasquee have, but don't you understand, the same area what when .ai file is converted to the dynamic object in Ps? Do you have any ide what may cause this difference in the rendering of the same object?

  Thank you in advance!

  

  Make sure you use the same color space in both programs and create your mask in the destination color space. It's a problem of color management. This problem is because you use different color spaces in Illustrator and Photoshop.

  Most likely, you have created the mask in a CMYK (text) color space into Illustrator and your Photoshop document uses an RGB color space. Indeed you will have the same problem in Illustrator if you convert your document CMYK to RGB using the file > color mode of the Document or copy the work of a CMYK document and paste it into a document RGB. Having in mind that the problem is not limited only to the conversion between the RGB and CMYK color spaces, you might have the same problem when converting between the two areas of different color using the same color as RGB, for example sRGB template in Illustrator and Adobe RGB in Photoshop. For more details about similar problems with color spaces to check this thread:

  http://forums.Adobe.com/message/3911412#3911412

• How to do not include the path when creating pdf of many html files?

  I use "merge into one file" to create a PDF from many html files. However, the generated pdf file have html files path information. I wonder how to generate a pdf file without path information.

  Go to CREATE > create a PDF file of the Web Page > click the SETTINGS button in the dialog box that follows > uncheck "place headers and footers on the new page.

  Thank you!

• Impossible to change the path for the shared virtual machines

  Hello

  as long as user root, in the Preferences menu, shared, VMs when I change the location and

  (1) push apply 1 time, the path is created in the right place on the hard drive but when I want to share a virtual machine and move toward this path, the default path is the default: / var/lib/vmware... not the one created by the menu setting.

  Cannot change the location for the shared virtual machines.

  (2) push apply several times: odd error menu

  

  OS: Linux mandriva 64

  Any ideas?  Is this a way to manually change the path in a config file?

  Best respect

  Out of work station - stop pass.
  Then edit datastores.xml - don't know where the files on Linux - I expect it be in/etc/vmware/hostd or something like that

• "selection of object by the path only" in Indesign?

  Hi, I have just changed to cs4 to 5.5 and can't seem to select an object, if it is another, even if the top element of a 'none' was complete. I know that I can hold cmd and select "via" objects but in cs4, I didn't need to do it as long as the top item had no fill. This preference can be enabled/disabled through the "selection of object by the path only" checkbox in illustrator, but I can't seem to find it in Indesign. Maybe I'm lazy who want to simply do not press the cmd button but it's just annoying the hell out of me for any clarification would be much appreciated.

  Ant.

  Hey Ant,.

  You use the 'Frame' Rectangle tool or the tool 'Rectangle '? I find that I selected the 'Frame' Rectangle tool, it will always be the selected object, even if it has no fill; using the "Marquee" tool, if it has no fill, you can select the objects below it without going through CMD-click.

  Hope that helps,

  See you soon!

  Mikey

• create new folder, but the path does not exist.  That's why I need to create!

  I want to take their existing case files, wallpapers and move them into a new catalog LR, jpg_edits.  In the import window, I left click on the parent, my photos and get 'create a new folder '. After which a new folder creation box opens to display the ms mode my file Explorer and the parent.  But he says to Select a folder, so when I try to type the new name, they tell me the path does not exist.  Which may be the reason I'm trying to create the new folder.  Everything seems to be able to do is to slect the existing folders.  Where is the creation of a new part of catalogue record?

  If I understand the question, you want to create a new destination folder in an existing parent folder. Fix? Once you click the folder parent in the Destination panel (left side of the screen to import), expect the top of the Destination table. You will find two elements here. The first, in the subfolder, allows you to enter the name of the new subfolder to create but it must ensure that the box is checked. Select the check box and enter the name of the file in the text field. Then, select the option in a single folder drop-down organizing. With these options, you will see a new subfolder in the tree under your (grey) selected parent folder. Even once all this is done on the right side of the screen to import.

• How to insert photoshop image with a work/clipping path in illustrator using the path?

  How to place an image in Illustrator using the clipping/work path created in Photoshop?

  I have a .jpg of an object on a background image. This image has a clipping path that écrêtera the background of the image. I could clip the outside background (in Photoshop) and save the image as a file .psd with a transparent background, and then insert the .psd file in Illustrator... it's easy. What I can't understand is to place the image (bottom) .jpg and use clipping path Photoshop be clipping path in Illustrator. In this way, I can take this clipping path and use it as a layer of gloss spot for production. I work on a Macbook Pro and CC2014. Thank you.

  But you can export the path separately in Illustrator, then he get married to the JPEG placed as a clipping mask.

  In traces of Photoshop Panel, target the path, and then choose file > export > traces to Illustrator...

  He'll write a .ai file. Open and select all (it's a quick and easy way to 'see' the path because Photoshop it will export with no border or background, leaving mostly 'invisible' on the artboard Illustrator).

  Then you can copy it to the collage at the top of your JPEG placed. Position them as you like, select this option and the JPEG format, then choose object > clipping mask > make...

• When the path is missing from the Illustrator file, the problem occurs

  When the path is missing from the Illustrator file, it keeps duplicating well the path is absent from and cannot do anything else in the file

  Sorry about that - it happens to PSD files too. The solution is either to the back file where she there or, if you do not have the file, the set (of the same type) _any_ file in the old location renamed the old file name just if she continues to complain.

  Or, if you don't need the project, just leave Ch and delete project - it will create a new on the next launch.

  If you know in advance that you will be willing to delete the files to work on disk that are still referenced, you can avoid this problem by selecting the puppet in the project Panel, and unchecking the option "Auto-sync with the work" in the properties panel. Manual synchronization is then possible to check and uncheck this option.

  We have already fixed this bug here at the factory in Seattle, so it won't be a problem in Preview 2 and later versions.