Why the path of motion is different!

Similar Questions

• Why the path I create in Illustrator CC never rest in place?

  Is there a current bug in the tool path in Illustrator CC? I tried grid align, Snap Gird, Guides, snap to Guides, enabled all the Options to turn power on and off. No matter what I try to solve the problem, the way I create will not remain in the position that I place when adding properties. Adding an accident stroke to the path causes the path to awkwardly move in a random direction, mainly down. I won't 6400% zoom with the direct Selection tool and manually move the anchor points back on the guides/grids that I put up and as soon as I let go, the anchor returns to the position of the random pixel. IE - set the anchor of 400px and happen randomly to the 400.5px later. Nothing stays the place. It seems that any adjustment to the path will cause the path move randomly. It's extremely frustrating trying to keep things clean and precise. I spend more time trying to solve the buggy movements than to actually create my work.

  Is there a setting preferably I'm missing that causes this or is this a real bug?

  410er0r,

  Just to be sure: is to line up on the grid of pixels completely off?

  Otherwise, you can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Why the division operator give me different results in different screws?

  Hi all

  I'm quite the LabVIEW newbie, so please forgive me if it's elementary.  I have a signal that I'm acquisition.  The signal is fairly low amplitude (.01-0,1 V).  During each acquisition, I share the values of the sample defined by another few (0.047) using the division operator.  I see inconsistent results and I am puzzled as to why.

  In ex1, which I built from scratch for this post, everything works as expected.  I can confirm with the debugger that every reading of the sample overall is well divided and the average, max and waveform graph look like I expect.

  When I use a similar construction in my real application, however, the division often results in the INF file, and when I look with the debugger I see after fracture of the values of the signal... just don't make sense to me (x 2).

  I thought I must be missing something in the real application associated with split and merge multiple signals, so I ripped out everything except the Division (ex3).  Although this code looks a lot like the ex1 works well, the product always division infs and strange results.

  These three examples receive the same signal.  My best guess is at this point that the built-from-scratch example is force double passes to the operator of division "the right way" and that the examples of dysfunction are force double in a different way, incorrect.  I tried to delete and re-create the signal path in the examples of dysfunction without result.  My problem is that I don't know enough about the LabVIEW data types to find out how to impose the appropriate constraint.

  Can someone point me in the right direction for a solution?  I would be very happy to help.

  Your first image divides your signal of 0.047. Your second and third images are 0.047 dividing your signal. Reverse your son in fracture on image 2 and 3 knots, and I think you should be ok.

• Why the my triggers timeline are different?

  
  I try to add an element to get timeline trigger. When I click on add a trigger, that's what I see and there is no option to add a to-do item - even if I do a search.

  

  In the tutorial, I'm following on Lynda.com and other documents I've seen searching the Web, it is what it is supposed to look like:

  

  I use Edge animate CC - selected do not know if I need to have something different to get the options indicated above or what. I tried to click on the different selections like video, audio, etc. and I'm not finding what I need.

  Any idea would be appreciated.

  Yes, the Panel shares was changed in the update of 2014 CC: the Actions update panel ' Team Blog animate Adobe edge .

  All actions in the previous Panel always work (some may have paid off), but there are not more excerpts of predefined for each button.  You can reference all those here however: API JavaScript Adobe Edge animate CC.

• Why the connector pane displays a different connector for lvclass?

  Picture is worth 2000 words...

  What is the special problem with the connectors on the left & right superiors?

  I have other lvclasses, but they do not have the points X shaped...

  

  Those who are marked as dynamic connections distribution (take a look on where you would be required). An entry from JJ means that it is a VI that is designed to be substituted dynamically at run time according to the type of class actually present on the wire.

• Why the debth bit of my different raw file image in my camera, Brigde and the opening in Photoshop?

  I have a full frame Nikon D700 12 megapixel camera that has a depth of 12 to 14 bits. I used to shoot images with the file format raw Nikon (NEF) with the parameter of color space to Adobe RGB (1998). When I select a picture to view the details of the metadata in Adobe Bridge, the number of bits is indicated as 16 and color as RGB. Open the image in Photoshop displays the detail long and narrow line down the near the bottom of the screen. It indicates that the color is 8 bits but still Adobe RGB (1998).

  Can someone explain please these fluctuations? It's always a NEF file, I want to talk to.

  Thank you.

  With Camera Raw open, you must set the color space and depth of Bit to open like in Photoshop. See image:

  

  Edit: In addition, a raw file contains raw data - no color profile embedded. At least is not all programs, with the exception of Nikon, will recognize.

  Benjamin

• Why the port is different with others in Nexus7710?

  Hi you see below. Why the port highlighted number is different with Eth4/23 when you use the command show interface brif? Thank you

  Eth4/22 - eth routed down administratively to auto (D)-
  Eth4/23 - eth routed down administratively to auto (D)-
  Eth4/24/1 - eth routed up to 10G (D) none-
  Eth4/24/2 - eth routed down administratively to auto (D)-
  3/24/Eth4 - eth routed down administratively to auto (D)-
  Eth4/24/4 - eth routed down administratively to auto (D)-
  Eth7/1 - eth routed down administratively to auto (D)-
  Eth7/2 - eth routed down administratively to auto (D)-

  They look like this:

  http://approvedoptics.com/Cisco-QSFP-4x10g-aoc10m/

• Why the menu link and hyperlink all go to the wrong page

  Have a site that has been active for a while and was fine when we downloaded and became operational.  Some time after, with subsequent updates to the site, one of the menu buttons goes to the wrong page, no matter what we do.  I tried "include the page without hyperlink" and then used the hyperlink tool to post a link to the page, same result.  Then I deleted the link hyper, tried "include the page without hyperlink" and inserted the link for the appropriate page hard. Same result.

  Also on an other pages, there is a hyperlink which is supposed to go to this page as we cannot return, and THIS hyperlink goes to the wrong page (the page we want to propose is equipment, and what he's constantly going to is the about page.

  I checked for additional boxes (which does not explain why the text on a completely different page link also goes to the wrong page, but check it anyway) and there is no additional text box or whatever it is.

  I think that this must be a glitch of Muse and do not really enjoy the idea of rebuilding the site.

  Please help us to understand what is happening. Site of phone works fine it's just the version of office that is glitching.

  Click here to view the site online.  No matter what page you are on, if you click on "Facilities", it takes you to "About Us" and if you go to the Contact page and click on the text "Amenities" link which will take you to the page about us.  He's allergic to the equipment page.  As I have said, when the site was first direct links menu everything has worked well.  Actively, we test each page.

  I hope someone can help.

  Hi David,

  Thanks for the reply e-mail after receiving our folder.

  We tried your suggestion (which I thought I had tried before, but didn't so I tried again) with the same result.  Still no way to access our facilities page.  Have you checked the preview site, or did you visit the site?  When see us it in the preview (in Muse) then the page is launched, and the menu is as it should be.  But it does not work after uploading on the real site.  Our site of phone works fine, however...

  We're going to look at the server and see if there's some sort of corruption which runs at this level and will post if we find anything.

  Thank you

  Michelle

  * Amended to add that we found a redirect that should not have been in the htaccess, deleted page it and now it works!  Thanks for the time and help Ankush!

  Michelle

• Text-Animation: my text is under the path and not on the path (for some reason any)

  Hello

  I use after effects CC (12.2.1) on Mac Book Pro El Capitan 2013.

  I'm not able to put text on a path for animating text. It will always appear in the path. I asked different people and I never received a response, because it seems I'm the only person who has this problem.  I don't need to write much more, because it's really as simple as that. My screenshot will show my dilemma and I have not made any changes to attributes.

  Please take a look and hopefully help me with this.

  (larger image here: http://postimg.org/image/x4xj8duqz/)

  

  Anyway, I know now what happened. If you have a text in a bounding box, it aligns in the path. I discovered this quite by accident.

  Thanks for the help.

  See you soon.

• Archives generate the different path compared with the path mentioned in LOG_ARCHIVE_DEST_1

  Hi all

  I have 2 Installation RAC + ASM from the node. Here, I found that generate the archives on the different path compared to the path mentioned in log_archive_dest_1.

  O/P to the list of archive logs:

  Database log mode	Fashion Archive
  Automatic archiving	Activated
  Destination of archive	+ ORAARCH

  Sequence of journal online oldest 2307

  Log sequence archive 2309

  Current log sequence

  2309

  Archives to generate the path are: (to 17 July 2015)

  + ORAARCH, ABCDB, ARCHIVELOG, 2015_07_17

  Please guide why such difference?

  Destination of archive

  + ORAARCH

  Above location is diskgroup name in ASM (OMF), all files created in the DISKGROUP/DBNAME/FILETYPE format.

  2015_07_17 is the DATE of generation of the Archive.

• Why the temperature shows on my watch always different temperature on the watch of my husband when they use the same application?

  Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?

  Hi Jodie

  If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):

  • On your iPhone, in the weather app:
    • If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
    • To add another location, select the icon «+»
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled;
    • Make sure Apple Watch is face value while it helps;
    • Check that the weather is set to always;
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.
  • For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
    • iPhone: settings > Bluetooth - on.
    • iPhone: settings > Wi - Fi - on.

• Why the same photo's file size different in Photos and in the Finder?

  I have a photo size 4608 x 3456. When I open the file information in the Apple's Photos app, it says that the file is 7.8 MB. When I open the same photo in the Finder and look at the news file, it is said that it is 3.1 MB on the disk. Why does this happen? All other metadata is the same in the pictures, Finder, Lightroom or Photoshop, but I can't understand why the file size seems to have changed since I dragged photo pictures to the Finder.

  Thank you.

  How you view the photo in the finder (you shouldn't be messing around inside the photo library)?

  If you export or drag / drop you create a new file with a different compression - using export allows you to control what

  LN

• Installed application behaves differently by the path of the file

  Hi all! I have a problem regarding my application installed on another pc from "My Installer", that I have built my original labview project.

  I wanted to set up a file open/create operation, get the path of the current file of my vi, create the new folder 'report' and the new report file, whose name is composed of the date and time when it is created. With 'Get string date/time', I got the date as '25/05/2015' string and time string like '14:24:20 ', and 'find and replace the string' I have them is converted into '25052015' and "142420" everything simply by replacing "/"and":" with nothing.

  It works fine with the original vi in my pc, but with the application installed on another pc, I got error in the path, that instead of 'C:\...\report\transducer_25052015_142420.txt', I got "C:\...\report\transducer_25052015_14.24.20.txt"!  The colomns are replaced by dots!

  I have no idea why my installed application would give such error. Someone has an idea?

  PS. I tested on the difference between 'Run application path of time' and the file path by default, you can see on the image below.

  

  You can provide a format if you use the Format Date/time string.  You don't need to replace the then you do not have to worry about getting to be in the way in which the system settings.

  

• Why the SAN disks and drives NAS recognized differently by the computer?

  Hi all;

  I'm a newbie in the sharing of storage.
  Why the SAN disks and drives NAS recognized differently by the computer? Computer sees SAN disks as local drives, NAS drives as network drive, even if they are all connected to the computer by the same network topology.
  I knew that SAN uses the block level transfer to transfer data all in SIN use level file transfer. Is that what this has something to do with which SAN and NAS drives are recognized differently by the computer? If so, how?

  Thank you.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit