Why the Replace Color tool does not replace my color?

Similar Questions

• Why the Clone/Heal tool does not remove a white spot?

  After being embarrassed by failing to check the Clone/heal tool to ensure that the opacity has been properly resolved, I am encouraged to ask another question which is not affected by the appropriate correction that in fact the tool works very well in most cases. However, the LR4 (and previously LR 3) use) iMac 27 quad) at odd intervals, some images present themselves with a single white spot, usually on a blue background, which cannot be removed or cloned with the LR Clone/heal tool. It can be removed with the cloning tool in PS, but not in the LR. I don't know whence the tasks. Sometimes they appear in a sequence of 3-4 or just individually. A copy of one is attached here. I don't know if this place is an aberration in LR or my cameras. As it happened with different cameras, I assume that there is a problem with the LR. Any comments?

  It looks like an adjustment brush.

  Hit your adjustment brush and see if a PIN is displayed. Select the Pin and remove it.  The task disappears? If so, that's the problem. Double check to ensure that it is not part of a series of strokes on the image somewhere else.

• Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  I have already updated to the last DC v15.009.20077...

  So I found a way, if I do it just right, it works (with the file, click the "tiny" file and then save as. I made the mistake of first pressing the home much more first. Really not intuitive or easy to use even if... Looks like you have replaced the button "save under" with the "save in the cloud." We use mettle at work, and the cloud of Adobe is irrelevant for me...

• Why the Polish support page does not work?

  Why the Polish support page does not work?

  http://PL.consumer.Toshiba.EU/PL/support/home/support_home?

  I think the error message is pretty clear:

  + Service temporarily unavailable +.
  + The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later. +

• The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  What version of photoshop are you?

  The red eye tool should be in the same location as the healing brush and Patch tools.

  

• The Healing Brush tool does not appear in my tools. Where is he?

  The Healing Brush tool does not appear in my tools. Where is he?

  Thank you

  Kevin

  What happens if you do a right click on this icon in the Options bar at the top and select Reset all tools?

  

• Why the "vertical-align" argument does not work?

  Very often, I try to use the "vertical-align" argument to control the CSS formatting, but so far he has never worked, so I had to resolve the situation by specifying values for margin...

  Why the "vertical-align" argument does not work in CSS?

  Alternatives?

  For your reading pleasure.

  http://phrogz.NET/CSS/vertical-align/index.html

  Gary

• Why the Satellite L650-116 does not appear on the list of products?

  Why my notebook l650-116 does not appear on the list of products?
  It does not appear even with the auto detects the program located on the site.

  Hello

  I put t know what you mean?
  SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
  You can find the details on the Toshiba Cyprus page
  http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

  In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

  Welcome them

• Problem of the eclipse - signing tool does not

  Hello

  The Signature tool does not load in my copy of eclipse. I'm running the beta version 7 in Eclipse Helios. When I select 'sign with Signature tool... ". "in the menu, nothing happens. The only chance I have is to try to 'All together', but that works only intermittently.

  Any ideas?

  Thank you

  I had the same problem: you need to select your project in the Project Explorer, and then right-click, select Blackberry--> sign with signature tool...

• Why the length of film does not change when I remove Vista Movie Maker clips?

  You have not answered my other question.  I get an error "does not fit" when you publish a movie on dvd. I deleted half the clips in the storyboard and length does not change. I always get the error "will not fit". After I saved the project. It seems that it becomes the length of the imported clips not what is in the table of Storyboard. The length of the table of Storyboard is only 01:30, but the length in the window shows 02:42 that is causing the error. It seems to me that it should use the length of the table of Storyboard because it's what makes the final video on dvd.

  Yes... adding or removing items from the timeline should change the duration of the project.
  The files in your component collections have no effect on the duration of the project.

  I suggested that you publish in the movie .wmv format to see if the version with clips
  removed would still last for 02:42.

  As I have said from the beginning... creating several small projects may be your solution.

  I'm sorry that my suggestions seem redundant to you. Perhaps you could find assistance elsewhare.
  There is a forum dedicated to Movie Maker on the following link:

  Windows Movie Maker Forums
  http://www.windowsmoviemakers.NET/forums/

• Compress files old option in the disk cleanup tool does not seem to do anything

  original title: compress old files

  How to compress old files? When I run Disk Cleanup, the compress old files is checked, but the cleaning does not remove the 13, 464KO here. How can I get rid of this?

  Hello

  http://www.ehow.com/facts_6010913_can-old-files-disk-cleanup_.html

  Compress old files

  • This option, which is the only option that does not remove the files, compresses the files on the operating system that have not been consulted after a certain period of time. The files are not deleted, but simply compressed into a smaller size since they are not used and are accessible by the operating system if they are needed once more.

• Please, I m using a Logic Pro 9 and the key "Advanced"(tools) does not seem to me in the 'preferences'. ". Why? Help!

  If please, I m using a Logic Pro 9 and are looking for the key "Advanced" (tools) but doesn't seem to do not for me in the 'preferences'. ". Why? Help!

  Because there is no mode "Advanced Tool' to Logic 9.

  Logic 9 is always and only has an advanced mode, there is no other method.

  Advanced tools (and their duty to be checked) was a ridiculous logic X when it was released.

• Why my Bucket fill tool does not recognize the gray lines?

  First of all, I'm in RGB, with Photoshop Elements 6.  I am filling an area of the business (the building on the left) Center in my drawing, but it goes both the door lines and the text on the building.  With the center of students (the building on the right), it's the same thing with one of the gray lines (but not the text).  And it's under a layer (used to be composed of several layers, but have been merged into one).  What should I do?  Here's a picture of him down below:

  

  A value of lower tolerance of about 3 to 6 should work better.

  Tolerance allows you to adjust the sensitivity of the paint bucket tool is of different colors.

  

• Why the new cRIO-9076 does not support the scanning engine?

  I spec'd a new chassis cRIO-9076 spiffy but learned that, despite its impressive capabilities, it does not support the analytical engine.

  I'm curious as to why this is.  I hope that this is not an indication of support OR away from the scan engine and perhaps NSV technology as well.

  OK, uninstalled and reinstalled OR RIO 4.0 and now all is well, guess it was just one of those inexplicable installation problems.

• Why the button new folder does not work

  the button create a new folder does not work

  Hello

  You have a common problem with Windows 7. The work that I and many others use is a utility called FileMenu Tools. You can download safely from this link: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After downloading, install the program. Each option is checked by default. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know how you fare.

  Kind regards

  BearPup

• Shift-click with the spot removal tool does not remove the straight lines

  Hello, I am after a tutorial on Lynda.com, which demonstrates the use of the spot removal tool to remove a task from a straight line.  Click on one of the ends of the line, hold the SHIFT key and click on the other end of the line.  Pouf!  Nothing happens.  The technique works very well for me in Photoshop.

  I have a PC with Windows 7 Pro 64 bit and Lightroom CC 2015.6.1, Camera Raw 9.6.

  In fact he worked sporadically on the image of a practical, but hot in a reliable way and does not at all in all the other images that I try.    Advice will be greatly appreciated.

  Thanks - Dave

  The technique is

  Hold the SHIFT key FIRST, then click and drag horizontal or vertical.