Why the xbox wireless controller doesn't lose if not about receiver synchronization?

I installed the drivers and the controller appear in devices and printers, but if the controller is not 5 cm from the receiver it starts flashing?

Don't try not to be a fool, but you have tried new batteries in the controller?

Tags: Windows

Similar Questions

  • How can I turn off the xbox 360 controller wireless for pc

    How can I turn off the xbox 360 controller wireless for pc

    Hello!

    I made a small application for this! It is called XboxExt (Manager of the Xbox 360 controller). There is no way to disable the controller in a failure to properly on PC. With the Games Games for Windows Live you can press the GUIDE button on your controller, and you can turn it off.
    So my app is doing the same thing, but not only with Games for Windows Live games. So you can use it anywhere, anytime.
    Best regards
    Parker
  • Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

    My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

    I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

    I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

    I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

    I need step by step instructions on this Yes please treat me like a fool!

    Thank you

    Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

    After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

  • Xbox controller will not connect to the xbox wireless receiver?

    I got my Receiver to finally work and now when I try to connect my controller that do not access, it just flashes continuous four lights repeatedly. How can I fix it?

    Hello

    Welcome to the Microsoft community.

    Of your posts that I understand that you are facing issues connect the Xbox controller for Xbox wireless receiver.

    Have you tried to use the controller on a different computer?

    You can see the steps from the following link and check if it works:

    Xbox 360 Wireless Controller disconnects or unable to connect

    http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

    Reference:

    http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info

    You can also contact Xbox support team for assistance:

    http://support.Xbox.com/en-us/contact-us?XR=footnav

    It will be useful.

    If you need assistance on questions regarding Windows, let us know and we will be happy to help you.

  • Xbox wireless controller not connecting with PC, please help

    I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

    Hello

    Setting up Windows Media Center

    To use Windows Media Center with the Xbox 360, you must have a computer running Windows Media Center. Windows Media Center is included with the following versions of Windows:

    ·         Windows 7 Home Premium or full, professional edition

    ·         Windows Vista Ultimate or Home Premium

    ·         Windows XP Media Center Edition 2005

    Step 1: Get the key Setup of Xbox 360

    1. on your console, go to My Xbox , and then select Windows Media Center.

    2. follow the on-screen instructions.

    3. write down the 8 digit Media Center Setup key.

    Step 2: Add an Extender on your computer

    1. start Windows Media Center.

    2. click on tasks, and then click add Extender.

    3. When prompted, enter Xbox 360 8-digit setup key.

    4. complete the configuration of the Extender

    For more information, visit the link given below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

    http://Windows.Microsoft.com/en-us/Windows-Vista/share-your-media-in-Windows-Media-Player-with-other-people-or-devices

    Thank you, and in what concerns:
    Shalini Surana - Microsoft technical support.
    Visit our Microsoft answers feedback Forumand let us know what you think.

  • I can't use the Xbox 360 controller for condemned Criminal Origins

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • I can't using a wired Xbox 360 controller as a joystick for the origins of felons game.
    • I looked online for a solution and close using joy to key. I could map each button and it was totally functional, but I was still unable to turn or to consider, if I could walk because I had mapped the left analog stick for market controls. I tried to change the settings for the joystick in the game, but they are not what I noticed at all.
    • the game recognize at least some controller, when the mapping in the keyboard settings, it recognizes the buttons, but not the triggers or the analog sticks.
    • I tried to update my drivers, I tried different usbs and always made sure that it was connected, all of the simple things.
    • I really want to play this game, and I'll be really disappointed if I have to use the keyboard and the mouse to do it, I'm not comfortable at all to aid in a fps game.

    Thanks for your help!

    but in fact I ended up understanding.

    apparently my controller was defaulting to an old driver or the wrong driver or something, so the game incorrectly recognizes it. at least partially wrong.

    the old, updated, deleted totally worked! for the most part, had yet to use joy to key to map triggers, and the d - pad is recognized as a button, instead of four separate.

  • Games for a list of windows that are compatible with the xbox 360 controller

    can someone give me a list of window pc games compatible with the 360 controller.

    Hi Antt lee,

    Thanks for choosing Windows Vista community.

    I suggest you check the links for the games that are compatible with XBOX 360 controller below.

    http://www.microsoft.com/windows/compatibility/Details.aspx?type=Hardware&p=Microsoft%20Xbox%20360%20Wireless%20Controller%20for%20Windows%20-%20game%20pad&v=Microsoft&uid=&pf=0&pi=4&c=Mice%2C%20Keyboards%20%26%20Input%20Devices&sc=Game%20Controllers&os=32-bit

    http://www.Microsoft.com/Windows/compatibility/search.aspx?type=software&s=list%20xbox%20360%20%20Games&page=2

    The Compatibility Center lists thousands of devices and software titles to help you identify what will be or will not work with the Windows Vista operating system.

    Hope the information is useful.

    Kind regards
    Marnie.

  • trying to find software for the xbox 360 controller

    Ive been trying to connect my principle wired xbox 360 to my computer that has windows vista but he says he can't find software for the principle help me please

    Hello

    Download the software from the following link:

    http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

    See the following article:

    How to connect your Xbox 360 wired controller to a computer running Windows

    http://support.Xbox.com/en-in/Xbox-Live/connecting/connect-wired-controller-to-computer-running-Windows-906347

    For reference:

    Troubleshooting your Xbox 360 Controller for Windows

    http://support.Microsoft.com/kb/908888

    For further assistance should your Xbox application supports. Here is the link:

    http://support.Xbox.com/en-us/contact-us

    Thank you

  • Why my Intel wireless adapter is disconnected and does not restore until I restart the computer?

    Very randomly while I'm connected my computer won't go to any link and said I have no connection. I then try to solve the problem and it says to turn on my wireless adapter, but button is pressed and the light is on, so I turn it works without success. Then he tells me to check my router or a modem that always works so my ISP is not the problem. When this occurs, the computer does not have network connections, and has a red x beside the bars wireless not saying no connectivity, even give me the possibility to see the available wireless networks. The problem will persist until the computer is restarted, or the windows Explorer is restarted.

    Any ideas? Thank you.

    Pavilion dv6-3225dx
    Windows 7 Ultimate House
    Intel i3 M 350
    XY980UA #ABA

    Hello:

    The latest driver for your WIRELESS Intel network card is v 13.5.0 from 04/03/11.

    If this is the driver you have, then this is the most recent.

    If this isn't the case, you can give it a try, since you have nothing to lose. You shouldn't have to put up with unstable connections. I hope that the last version of driver if you are not running currently, solve your connection problems.

    I have included two versions of ILO since you listed only you had W7...

    W7 32-bit:

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19855&ProdId=3199&lang=eng&OSVersion=Windows%207%2c%2032-bit * & DownloadType = software % 20Applications

    W7 64-bit:

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19856&ProdId=3199&lang=eng&OSVersion=Windows%207%2c%2064-bit * & DownloadType = software % 20Applications

    Paul

  • Games PC crash when you use the XBOX 360 controller?

    I have a compatible (no name) Xbox controller and it plays the Games very well but one of the buttons is broken, so I bought an official Xbox 360 controller for windows (using Win7 64 bit)
    the circle on the controller flashes constantly and whenever I start a game, it crashes,
    on NFS shift 2 it crashes at the start of a race every time.
    Ive got the latest drivers but still no luck

    I got it to work! Let your controller xbox 360 pluged and try this: If you have installed MotionJoy uninstall it! Go to device under something Manager as common joystick right click on properties, then click on uninstall and if prompt to uninstall the software, or remove the software click Yes. Peek under devices of human interface in right to do this, click on each of them you see peripheral HID-compliant and USB input device and click on uninstall the device for EACH Manager. Yes, your keyboard mouse will not work for a few seconds but this will ensure that you uninstall it * controller device drivers. After you have uninstalled these elements unplug your Xbox 360 controller now to get the latest drivers MS site for controller xbox 360 and install the drivers FIRST before connecting the Controller and make sure you click on finish on the program before plugging it in. (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows) believe me it should work I have 1 flashing continuous on my gamepad not like before where he was stuck. more I tested it on Fifa12 where I was crashing before so far played 2 games no problem :)

  • Why the xbox reward points is a scam

    Why are xbox Rewards points a scam, what they said that they have gave me 400 points, but he never appeared there are 3 or 4 months it was never this 320 i left a message that they never to return with me which was 2 months ago

    ASK THE XBOX:

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    Toll-free: (800) 4MY-XBOX or (800) 469-9269

  • Xbox 360 controller for windows recognized do not XBOX360

    I recently bought a Xbox 360 controller for windows (wireless) and in the box says its compatible with the xbox 360, it also works very well in my pc, but when I tried it on an Xbox 360 console doesn't recognize (also tried to plug in the receiver and the freezes of the console), but he always recognizes the controllers provided with the console and also a wired Xbox 360 controller , I'm doing something wrong? (this happened with 2 joysticks wireless Xbox 360 for windows)

    Hello

    The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
    If you need to contact them.

    XBox - Support
    http://support.Xbox.com/en-us/pages/default.aspx

    XBox - Contact us (support)
    http://support.Xbox.com/en-us/contact-us

    XBox - Support Forums - and my XBox (top-right)
    http://forums.Xbox.com/

    Xbox technical support phone number

    • Toll-free: (800) 4MY-XBOX or (800) 469-9269

    XBox LIVE - Service status
    http://support.Xbox.com/en-us/Xbox-Live-status

    Manage the XBox Live account
    http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

    XBox Live Sign-in problems
    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • HP 14-r206nv: light wireless led doesn't work do not

    I have a very minor issue that don't mind operating of the laptop, but I'm curious to know why it does not work, because I know that before reinstalling windows it worked normally.

    Well well, to the point now. After a hard drive failure and replacement, Windows 8.1 are installed again and each driver has been installed and works well. The only thing that doesn't work is the led light button wireless (F12). The button is working correctly, activation and deactivation of the Wi - fi, but not the led. It lights, neither white nor red, it is always disabled.

    The model of the wireless card is Realtek RTL8723BE.

    I installed the drivers from the HP site.

    Version of the driver for the wireless card is 2013.8.915.2014

    The version of the wireless button driver is 1.1.7.1

    I tried the latest drivers for the card (an optional windows updates finds) implemented to date for this and the wireless button (if I try update driver in Device Manager, it installs a new) but nothing has changed for good so I decided to go back to what the official site suggests and post here.

    Hi @v1184,

    Thank you for your inquiry.

    I understand that you had a hard drive failure and he had to be replaced, you did. You reinstalled Windows 8.1 and all drivers are up to date.  The only problem you are having is that the wireless button light does not illuminate, but it does not work.

    You tried to update the wireless driver button, but has not changed, so you returned back to the recommended HP driver.  As the wireless button does not work it is not the driver, however, it could be that the light burned. The other possibility would be that when you replaced the hard drive, the connection has been dislodged or disconnected and must be reconnected.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on ' Thumbs Up ' below is a great way to say thank you!

  • The Xbox freezing and won't start do not.

    So my Xbox it does not work, he repeats to me that home took to long to the stat and gives the average error code that has no solutions. as for this is the work of buttond for about 10 seconds and then crashes again. the only Julien can do is hold the home button and then turn off the controller. And the xbox just outside spazzes. Please help me I tried many things

    [Moved from Virus & Malware]

    You will find the Xbox in favor in these forums-online https://forums.xbox.com/

  • Why the HDR toning work with some pictures, but not for others?  I have CS6.

    I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

    HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

Maybe you are looking for