Why this error is coming "APP-PO-14082: a Charge IN account is mandatory and cannot be determined" while creating a purchase order manually?

Similar Questions

• Why this error is coming and what is the reason because I have to tell my friend to not next time

  Generic Host Process for Win32 Services has encountered a problem and needs to close.  We are sorry for the inconvenience.

  Despite my drive HARD (C) this formatting error is still popping up. Only now its worse the machine hangs after some time and I can not work. In fact even the click of the mouse does not work and I have invariabley have to restart using the button on the Cabinet

  Please let me know how this accoured error in my computer & what could be the reason.

  Hello

  Follow these steps and check if the problem persists.

  Step 1:

  There are a few things that could cause this problem, since it is a generic error that does not necessarily indicate a problem. This could be a driver problem or a problem with a program, spyware issue or a virus.

  "A supported fix is available from Microsoft. For Windows XP SP2, the generic host process error can potentially occur on any system at any time. Even if you receive the error message shortly after starting the system, the error occurred during system shutdown before. Because of the magnitude of this problem, this fix was made available through Windows Update and distributed to users with automatic updates enabled to eliminate this problem on Windows XP SP2 systems. For Windows XP SP2, you may experience a last Generic Host Process error to restart after you install this hotfix. It's the system shutdown before the end of the installation of the new version. »

  -Microsoft database

  install the file following, then restart the system:

  http://www.Microsoft.com/downloads/Detal

  Be sure to keep your operating system updated by installing the updates from Microsoft.

  Step 2:

  If this does not resolve the issue, I would recommend that you run a full scan using the Microsoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose your data while eliminating malware.

• whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What is the exact error message do you get?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2 :  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• During the scan, I get this error "'there are no installed TWAIN compatible device." Please install one and try again. »

  Original title: scanner problem

  I get this error - "there are no installed TWAIN compatible device. Please install one and try again. "- When I try to scan a document using the utility Windows 7 Scan (hppscan7.exe) and a printer HP Color laserjet CM1312nfi. I tried to reinstall the printer driver and software.  I have a laptop HP G71-340US running under WIndows 7 64-bit.  Service Pack 1 is installed, and all windows updates are up-to-date.  I hope that someone out there has a solution for me!

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter of material and check if that helps.

  Open utility troubleshooting hardware and devices:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Temporarily disable the security software and check if it helps.

  Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Run the HP scan Diagnostic Utility and check if it helps.

  HP scan Diagnostic Utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&DLC=en&docName=c02114802&LC=en&product=3418707

  Hope the information is useful.

• This project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version.

  I have Premiere Pro cc 2014 on my lap top and just downloaded the cloud and the latest version of first, which is the first cc pro 2014 and I immediately noticed a different welcome to the search menu, and I got a warning saying "this project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version".

  Is this a problem with my operating system?

  Adobe has changed the format of project in point 8.1, you will want to make sure first is the same version as your other machine or newer. the current is 8.2 you can update the adobe creative cloud app or first Interior, updated.

• Whenever I try to restore my backup as soon as the time is up, he said: Server error and I lost everything on my phone and I want to know why this fault keeps coming back?

  I need this resol cause I am, after all, lose and iCloud comes up constantly as the server error when I try to use iCloud backup to restore everything and only time is this error appears

  See if it might help - If iCloud backup could not be completed or you can not restore - Apple Support

• Why this error pops up every time I have watch photos, videos or documents on my computer; Explorer Windows has stopped working? __

  Hello.  I have Window Vista.  I have Windows Defender and a good program antivirus that I run often.

  When I try and watch video clips or photographs or even word documents, I have this error. Windows Explorer has stopped working... it allows me to restart or go online and restart with the same result.

  What's wrong? What can we do about it?

  Hi Edward,.

  • You run an antivirus/firewall? If so, have you tried to disable or uninstall?
  • Have you tried to boot safe mode to see if the problem persists it? (See the following link for instructions: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode)
  • If the problem does not occur in safe mode, try a clean boot (follow the instructions in Vista, located here: http://support.microsoft.com/kb/331796)

  I hope that some of this help! Let us know the results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why this error "definition fl.video:VideoPlayer is not found.

  I have this in an .as file

  package {}
  Import fl.video.VideoPlayer;
  import flash.display.Sprite;
  
  SerializableAttribute public class VideoPlayerExample extends Sprite {}
  
  public void VideoPlayerExample() {}
  }
  }
  }
  

  When I create and save the .fla with a class of documents VideoPlayerExample and test the movie, I got this error:

  1172: definition fl.video:VideoPlayer could not be found.

  No idea how to find flash meets the definition. My copy of Flash has been installed with the default installation settings.

  you need a flvplayback component in your library.

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Could not load file or assembly 'drm-migration-ui' or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded.

  Hi all

  We receive this error to our client migration and we are running 11.1.2.2.302

  We have checked all pools and we see that windows update has recently installed some updates related to the .NET Framework.

  Clues for resolution are much appreciated.

  Thank you very much

  VINET

  1 stop the DRM service.

  2 make a backup of drm-config. XML

  3 uninstall DRM

  4 rename the old under EPM home DataRelationshipManagement installation directory so that we know, there are no files of the old installation where we reinstall

  OPTIONAL

  5 check that .NET 3.5 SP1 with the appropriate fixes installed on the system.

  6. check that all pour.NET/ASP.NET Web Server Extensions in particular have been properly activated.

  7 run aspnet_regiis.exe directory .NET 3.5 on this system. The relevant aspnet_regiis.exe will be under %windir%\Microsoft.NET\Framework64\v2.0.50727\ for .NET 3.5.

  8. run IISReset.exe

  9 re-install DRM in the same as before installation directory - which will be a new directory, of course.

  10. Rename drm - config.xml and restore your backup of this file.

  11 start the DRM service and test.

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Why this error ORA-00904: invalid identifier

  Hi all
  Please advice me what is wronge with this
  ORA-00904: "NONE": invalid identifier
  
  
  create or replace trigger test_table2
  before inserting
  on Ta
  for each line
  declare
  v2_none_con varchar2 (20);
  v2_none_con2 varchar2 (20);
  I have number (10);
  TYPE v2_EmpCurTyp IS REF CURSOR;
  v2_emp_cursor v2_EmpCurTyp;
  v2_stmt_str VARCHAR2 (200);
  RECORD IS of TYPE v2_employee_type (v_rowid varchar (100));
  v2_emp_content v2_employee_type;
  Start
  
  v2_none_con2: = 'NONE ';
  
  v2_stmt_str: = 'select rowid from t1 where name =' v2_none_con2;
  I: = 0;
  V2_emp_cursor OPEN FOR v2_stmt_str;
  LOOP FETCH v2_emp_cursor INTO v2_emp_content;
  EXIT WHEN v2_emp_cursor % NOTFOUND;
  dbms_output.put_line (v2_emp_content.v_rowid);
  i: = i + 1;
  v2_none_con: = 'NO ' | TO_CHAR (i);
  
  END LOOP;
  end;
  
  
  
  
  SQL > /.
  Insert in your values (10, 'W')
  *
  ERROR on line 1:
  ORA-00904: "NONE": invalid identifier
  ORA-06512: in the 'END. TEST_TABLE2', line 15
  ORA-04088: error during execution of trigger ' FINAL. TEST_TABLE2'
  
  
  SQL >

  First of all:

  v2_stmt_str: = 'select rowid from t1 where name =' v2_none_con2;

  I would give you compilation errors. I guess the real code is:

  v2_stmt_str: = 'select rowid from t1 where name =' | v2_none_con2;

  Now that the text of the statement would be? V2_none_con2 is 'NONE', dynamic SQL would be:

  Select rowid from t1 where name = NONE

  It is obvious, it will trigger ORA-00904 (except a column named NONE t1). What you want is:

  Select rowid from t1 where name ='' NONE

  So change:

  v2_stmt_str: = 'select rowid from t1 where name =' | v2_none_con2;

  TO

  v2_stmt_str: = ' select rowid from t1, whose name =="' | v2_none_con2 | '''';

  SY.

• Why this error ORA-01747: invalid user.table.column, table.column or colu

  Hello
  
  Run immediately is to give different results

  SQL>  declare
    2   v varchar2(30):='SAL';
    3   Begin
    4   execute immediate 'update emp set :1=1000 where empno=7900' using v;
    5   end;
    6   /
   declare
  *
  ERROR at line 1:
  ORA-01747: invalid user.table.column, table.column, or column specification
  ORA-06512: at line 4

  But,
  

  SQL> declare
    2  v varchar2(30):='SAL';
    3  Begin
    4  execute immediate 'update emp set ' ||v||'=1000 where empno=7900';
    5  end;
    6  /
  old 7900 new 7900
  
  PL/SQL procedure successfully completed.

  Can someone kindly explain to me the reason.
  
  I need to accomplish a task using the first way.
  
  What could be the solution to the above ORA error?
  
  Thank you

  Column names cannot be used as a bind variable.
  If you do not need to do this using method 1 as method 1 does not work by design.
  On the other hand, you need replace the literal (7500,7900) with a variable binding.

  --------
  Sybrand Bakker
  Senior Oracle DBA

• Why this error please help

  This query generates ERROR on line 2:
  ORA-01789: query block has an incorrect number of columns of results
  
  even if there are the same number and type columns (51)
  
  Published by: user652494 on September 18, 2008 13:53

  without seeing the actual query, it is difficult to comment. typo probably

  ORA-01789: query block has incorrect number of result columns Cause: All of the queries participating in a set expression           do not contain the same number of SELECT list columns. Action: Check that all the queries in the set expression have the           same number of SELECT list columns.
  

• Why this error?

  This application cannot be installed because Setup was misconfigured.

  Please see http://forums.adobe.com/message/5033774#5033774#5033774 where this topic has already been discussed.