Why this request is the problem?

Similar Questions

• Get the error code: 0 x 80041003 in Event Viewer. Events cannot be delivered through this filter until the problem is resolved

  Original title: - what the heck is - this?

  Can someone tell me what this means - in English?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I get this topic once per hour in my diary of events 'Application '.  The Source is: Microsoft-Windows-WMI and the event number is: 10

  Every word is understandable and I know what they mean, but how they are threaded and beat me to the syntax.

  Bill

  Thanks for the reply, Gerry.  I'm no stranger to computer, having started in 1962 in the Navy for 20 years.  The HD is fine.  I used the Hitachi software testing to verify this.  RAM is also fine after running MEMTest for about 17 hours.  CHKDSK shows up at all no error.

  I agree it could be caused by a hardware fault and looking for that I ran some tension and trials of O-scope on the motherboard.  The only discrepancy I found was Aida64 Pro told me that the 3.3V rail was only 1.75 v.  My DS was told that the rail was 3.327.  This led to the conclusion that maybe the sensor was messed up.  I have an almost identical computer with a motherboard in the same series and Aida reports that rail even as 3.319v.  So, I think that the motherboard may be offset slightly.

  The re - install is an easier way to remove a large number of applications I just didn't need more and had not touched in over a year.  Revo even would have struggled to clear the registry after such massive uninstall.

  I found that the results from a command prompt is quite easy if you issue the command once, read the results on the screen, and then do it again but to redirect the output to a text file ("' do_whatever > test_output.txt '").  All you have to do is cop0y and paste a post.

  This re - install and the subsequent installation of SP2, seems to have solved the error of the event: for now.

  Bill

• I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.

  I'm not tech guru when it comes to computers.  I don't really know enough to get into trouble.  Here's my problem.

  For the last six weeks or so, I keep getting dropped offline.  AOL is my browser and I get the message "your AOL software has encountered a problem" or words to that effect.  Tech AOL were useless to solve the problem.  I checked my error messages and noticed that when I fell off line, most of them involved a WININET problem.  I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.  It's just a guess on my part, but the problem becomes very irritating to say the least.  So, if someone can you please throw some light on my problem it will be greatly appreciated? This WININET error message might have nothing to do at all with hit his offline, but thought I'd ask at least satisfy my limited knowledge of computer programs.

  Thank you

  Gordon

  Gordon

  To see if your system or software from AOL, what happens if you connect to AOL by using another browser (like Firefox or IE)?

  Wininit is part of the operating system and usually if it was the problem you would have other problems on your computer then I suspect it's an AOL software

• -Event ID: 10 error 0 x 80041003. Events cannot be delivered through this filter until the problem is corrected. »

  Title: event id 10 original

  my PC (Vista Home premium SP2, 2 GB of Ram) is suddenly restart and get a blue screen. What can I do to fix this error? It is after 2 weeks after reinstalling windows.

  Here is the error message:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be

  sent through the filter until the problem is resolved.

  -

  -

  10

  0

  2

  0

  0

  0 x 80000000000000

  2365

  Application

  Lory-PC

  -

  ./root/CIMV2

  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99

  0 x 80041003

  Hello

  1. Faced with this issue specific request?

  Try the methods provided below and check if the problem persists.

  Method 1:

  This problem occurs if the WMI filter is accessible without the necessary permissions.

  To resolve this problem, run a script to stop the event ID 10 messages.

  You can check the link below to solve the problem.

  10 the event ID is logged in the application log after you install Windows Vista Service Pack 1 or Windows Server 2008

  http://support.Microsoft.com/kb/950375

  Method 2:

  You can try to perform a startup repair if the system still hangs after trying this article.

  Startup Repair will try to repair startup issues in Windows Vista. To run the Startup Repair tool, follow these steps:

  (a) Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  Note

  When you receive the prompt press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  (b) select your language setting, and then click Next.

  (c) select repair your computer.

  (d) select the installation of Windows Vista to be repaired, and then click Next.

  (e) under System Recovery Options, select the Startup Repair tool, and then press ENTER.

   

  Note

  If the repair process detects a problem starting in Windows Vista, it will run Startup Repair to automatically fix problems. If this happens, click Cancel, and then click view the advanced management and system recovery.

  (f) click Finish when the Startup Repair tool is completed.

  (g) under System Recovery Options, click on restart.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  I also suggest you to run memory diagnostic tool to check if the RAM is good.

  To run the Windows Memory Diagnostic tool

  (a) click Start, click programs principally made and then expand accessories.

  (b) right click on command prompt and select run high on the shortcut menu.

  (c) at the command prompt, type mdsched.exe. If you are prompted, allow the action. You can choose to restart the computer and run the tool immediately or schedule the tool to run at the next reboot.

  (d) the Windows Memory Diagnostic runs automatically after the computer restarts. Windows Memory Diagnostic allows you to choose among three suites of tests of varying rigour.

• I decided to do a clean install of windows 7, but when the disc it stops to extend windows files 0% I do not know why this happens is the drive.

  Original title: Windows 64-bit clean

  Ive recently done my 2nd attempt to install windows 7 64 bit and ive met the same problem, I have formatted and deleted all the data ln my drive hard amd decided to do a clean install of windows, but when the disc it stops expanding windows files 0% I don't know why this is happening is the disc

  You have all the features non-essential connected to the computer during installation? If you have external storage media connected, disconnect them.

  It is also possible to reinstall your Windows 7 media is corrupt. You can try to download a new copy and try again.

  How to: What are my options for Windows 7 reinstall media?

• Why this request required 2 additional columns in GROUP BY

  Hi all
  
  This is my query:
  

  SELECT "parent_level_id",
         "parent_level_name"
         "parent_level_id",                     
         "child_level_id",
         "child_level_name",
         "scenario_id",
         "scenario_name",
         "exported",
         "regress_cob",
         "scn_status_id",
         "tgt_scenario_name",
         "load_status_id",
         "load_count",
         "PRESENT_VALUE",
         "DELTA",
         "GAMMA",
         "VEGA",
         "PNL",
         "ORIGINAL_PRESENT_VALUE"
  
  FROM
  (
  select   0-fssPV.feed_id                        as "parent_level_id",
           fssPV.feed_description                 as "parent_level_name",
           fssPV.book_id                          as "child_level_id",
           fssPV.book_display_name                as "child_level_name",
           fssPV.parent_scenario_id               as "scenario_id",
           fssPV.scenario_display_name            as "scenario_name",
           nvl(sc.exported, 'N')                  as "exported",
           nvl(fssPV.parent_regressed_cob_date,  fssPV.parent_cob_date)    as "regress_cob",
           fssPV.scn_status_id                    as "scn_status_id",
           fssPV.tgt_scenario_display_name        as "tgt_scenario_name",
           fssPV.load_status_id                   as "load_status_id",
           count(*)                               as "load_count",
          sum(fssPV.present_value)                as "PRESENT_VALUE",
           sum(fssPV.delta)                       as "DELTA",
           sum(fssPV.gamma)                       as "GAMMA",
           sum(fssPV.vega)                        as "VEGA",
           sum(fssPV.present_value) - sum (srbase.present_value) as "PNL",
           (
              select SUM(vsr.original_present_value) 
  
              from validated_position vp , validated_scenario_result vsr
              where
              VSR.FEED_INSTANCE_ID= fssPV.feed_instance_id
              AND VSR.COB_DATE= fssPV.cob_date
              and vsr.validated_position_id= vp.validated_position_id
               AND vsr.scenario_id in  (SELECT   distinct mn.node_id as "SCENARIO_ID"
                                         FROM     TABLE(pack_scenarios_overview.splitInListIntoLeaves(a_scenario_list, '$', l_cobdate)) nodeIds,
                                                  marsnode mn
                                         WHERE    nodeIds.column_value = mn.node_id
                                         AND      mn.close_date is null
                                        )
                                        
                                       
           ) "ORIGINAL_PRESENT_VALUE" 
  from   (
  
  select fssTgts.*,
         mntgt.display_name        as "TGT_SCENARIO_DISPLAY_NAME",
         mnscenario.display_name   as "SCENARIO_DISPLAY_NAME",
         mnbook.display_name       as "BOOK_DISPLAY_NAME",
         fs.feed_description,
         sr.present_value,
         sr.delta,
         sr.gamma,
         sr.vega,
         p.position_id
  from (
  /** Treewalk to find Feed/Scenario dependencies **/
  Select fssBooks.feed_id,
         fssLinks.cob_date,
         fssLinks.scenario_id,
         fssBooks.load_status_id,
         fssBooks.scn_status_id,
         fssBooks.tgt_scenario_id,
         fssBooks.book_id,
         fssBooks.regressed_cob_date,
         fssLinks.feed_instance_id,
         fssLinks.parent_cob_date,
         fssLinks.parent_tgt_scenario_id,
         fssLinks.parent_regressed_cob_date,
         fssLinks.parent_scenario_id,
         fssLinks.parent_feed_instance_id
  from   (
  
  /** Treewalk (backwards) to find underlying data over FSS control table **/
  WITH fss AS
           /* Initial filter on feed_scenario_status for peformance           */
           /* cannot filter on scenario as we don't know the dependencies yet */
           ( select DISTINCT scenario_id,
                    f.cob_date,
                    f.scn_status_id,
                    f.regressed_cob_date,
                    f.tgt_scenario_id,
                    f.feed_id,
                    f.feed_instance_id
             from   feed_scenario_status f,
                    feed_group_xref fgx
             where    cob_date <= l_cobdate -- PVs for this cob must be loaded either today, or its regressed to a previous cob
             and    f.feed_id = fgx.feed_id
             and    fgx.feed_group_id like l_feed_group_id
             and    fgx.feed_id like l_feed_id
           )
    select   feed_instance_id,
             scenario_id,
             prior scenario_id,
             cob_date,
             feed_id,
             scn_status_id,
             regressed_cob_date,
             /* Need to maintain the root values to identify the scenarios that users are seeing */
             CONNECT_BY_ISLEAF "ISLEAF",
             CONNECT_BY_ROOT scenario_id        as "PARENT_SCENARIO_ID",
             CONNECT_BY_ROOT feed_id            as "PARENT_FEED_ID",
             CONNECT_BY_ROOT cob_date           as "PARENT_COB_DATE",
             CONNECT_BY_ROOT tgt_scenario_id    as "PARENT_TGT_SCENARIO_ID",
             CONNECT_BY_ROOT regressed_cob_date as "PARENT_REGRESSED_COB_DATE",
             CONNECT_BY_ROOT feed_instance_id   as "PARENT_FEED_INSTANCE_ID"
    from     fss
    start with fss.cob_date = l_cobdate
  
    connect by (prior fss.regressed_cob_date = fss.cob_date and
                prior fss.scenario_id = fss.scenario_id and
                prior fss.feed_id = fss.feed_id and
                prior fss.tgt_scenario_id is null
               ) -- Connect if regressed (rule: same feed/book/scenario, different cob)
            or (prior fss.tgt_scenario_id = fss.scenario_id and
                prior fss.cob_date = fss.cob_date and
                prior fss.feed_id = fss.feed_id and
                prior fss.feed_instance_id = fss.feed_instance_id
               ) -- and connect if paste as (rule: same feed/cob/book, different scenario)
    ) fssLinks,
    feed_scenario_status fssBooks
  where isLeaf = 1
  and   fssLinks.parent_feed_id = fssBooks.feed_Id
  and   fssLinks.parent_cob_date = fssBooks.cob_date
  and   fssLinks.parent_scenario_id = fssBooks.scenario_id
  ) fssTgts,
  position p,
  scenario_result sr,
  marsnode mntgt,
  marsnode mnbook,
  marsnode mnscenario,
  feed_static fs
  where fssTgts.feed_id = fs.feed_id
  and   fssTgts.parent_tgt_scenario_id = mntgt.node_id (+)
  and   mntgt.close_date (+) is null
  and   fssTgts.feed_instance_id = p.feed_instance_id
  and   fssTgts.book_id = p.book_id
  and   fssTgts.cob_date = sr.cob_date
  and   fssTgts.scenario_id = sr.scenario_id
  and   p.feed_instance_id = sr.feed_instance_id
  and   p.position_id = sr.position_id
  and   p.book_id = mnbook.node_id
  and   mnbook.close_date is null
  and   fssTgts.parent_scenario_id = mnscenario.node_id
  and   mnscenario.close_date is null
  ) fssPV
  left outer join scenario_control sc
    on fssPV.parent_feed_instance_id = sc.feed_instance_id
    and upper(fssPV.scenario_display_name) = upper(sc.scenario)
  /* Join to SBM to calculate P&Ls */
  left outer join scenario_base_map sbm
    on  fssPV.scenario_id = sbm.scenario_id
    and sbm.begin_cob_date <= l_cobdate
    and sbm.end_cob_date > l_cobdate
  left outer join scenario_result srbase
    on  fssPV.cob_date = srbase.cob_date
    and fssPV.feed_instance_id = srbase.feed_instance_id
    and nvl(sbm.mapped_scenario_id, l_original_scn_id) = srbase.scenario_id
    and fssPV.position_id = srbase.position_id
  /* Only display (root) scenarios that users have selected */
  where fssPV.parent_scenario_id in (SELECT   distinct mn.node_id as "SCENARIO_ID"
                                     FROM     TABLE(pack_scenarios_overview.splitInListIntoLeaves(a_scenario_list, '$', l_cobdate)) nodeIds,
                                              marsnode mn
                                     WHERE    nodeIds.column_value = mn.node_id
                                     AND      mn.close_date is null
                                    )
  
  group by fssPV.feed_id,
           fssPV.feed_description,
           fssPV.book_id,
           fssPV.book_display_name,
           fssPV.parent_scenario_id,
           fssPV.scenario_display_name,
           sc.exported,
           fssPV.parent_regressed_cob_date,
           fssPV.scn_status_id,
           fssPV.tgt_scenario_display_name,
           fssPV.load_status_id,
           fssPV.parent_cob_date
  --         fssPV.feed_instance_id,
  --         fssPV.cob_date
  );

  In this query for the initial section where I select the part "ORIGINAL_PRESENT_VALUE".
  

  (
              select SUM(vsr.original_present_value) 
  
              from validated_position vp , validated_scenario_result vsr
              where
              VSR.FEED_INSTANCE_ID= fssPV.feed_instance_id
              AND VSR.COB_DATE= fssPV.cob_date
              and vsr.validated_position_id= vp.validated_position_id
               AND vsr.scenario_id in  (SELECT   distinct mn.node_id as "SCENARIO_ID"
                                         FROM     TABLE(pack_scenarios_overview.splitInListIntoLeaves(a_scenario_list, '$', l_cobdate)) nodeIds,
                                                  marsnode mn
                                         WHERE    nodeIds.column_value = mn.node_id
                                         AND      mn.close_date is null
                                        )
                                        
                                       
           ) "ORIGINAL_PRESENT_VALUE" 

  Even if fssPV.feed_instance_id and fssPV.cob_date are not used anywhere in the clause SELECT requires tobe added to the last clause GROUP BY else
  the query if compile it successfully does giving "not a group of" error.
  
  Can someone tell me why that is the problem and why these columns must be added to the final GROUP BY clause.
  
  Rgds,
  Aashish

  Hi, Michael,

  Aashish S. wrote:
  Even if fssPV.feed_instance_id and fssPV.cob_date are not used anywhere in the clause SELECT requires tobe added to the last clause GROUP BY else
  the query if compile it successfully does giving "not a group of" error.

  In fact, you use both of these columns in the SELECT clause, when you calculate the original_present_value:

  (
  select SUM(vsr.original_present_value) 
  
  from validated_position vp , validated_scenario_result vsr
  where
  VSR.FEED_INSTANCE_ID= fssPV.feed_instance_id
  AND VSR.COB_DATE= fssPV.cob_date
  and vsr.validated_position_id= vp.validated_position_id
  AND vsr.scenario_id in  (SELECT   distinct mn.node_id as "SCENARIO_ID"
  FROM     TABLE(pack_scenarios_overview.splitInListIntoLeaves(a_scenario_list, '$', l_cobdate)) nodeIds,
  marsnode mn
  WHERE    nodeIds.column_value = mn.node_id
  AND      mn.close_date is null
  )
  ) "ORIGINAL_PRESENT_VALUE" 
  

  Since the scalar subquery is correlated to the fsspv.feed_instance_id and fsspv.cob_date, it is depenedant on these columns, the same, say TRUNC (fsspv.cobb_date, 'YEAR') is depenedant on fsspv.cob_date.

  You will have to perhaps put the SUM in the main query, not the scalar subquery, or replace the scalar subquery with a join (probably faster). Without knowing your table, or the results you want from your data, I can't say more.

  Whenever you have a problem, post a small example of data (TABLE CREATED and instructions INSERT for all tables) and the desired results from these data.
  Simplify the problem as much as possible. In this case, I think you can show that the problem is using just two tables, the alias fsspv and mn ones.
  If you can illustrate your problem using commonly available tables, like those of the scott schema, then you don't need to display all data; just the results you want.

  Looks like you're doing something like this:

  SELECT       job
  ,       COUNT (*)     AS cnt
  ,       (          -- Begin scalar sub_query to compute min_loc
              SELECT     MIN (loc)
            FROM     scott.dept
            WHERE     deptno     = e.deptno
         ) min_loc     -- End scalar sub_query to compute min_loc
  FROM       scott.emp     e
  GROUP BY  job
  ,            deptno     -- Omitting this causes ORA_00979: not a GROUP BY expression
  ;
  

  When you really should do something like this:

  SELECT       job
  ,       COUNT (*)     AS cnt
  ,       MIN ( (          -- Begin scalar sub_query to compute min_loc
              SELECT     loc
            FROM     scott.dept
            WHERE     deptno     = e.deptno
             ) ) min_loc     -- End scalar sub_query to compute min_loc
  FROM       scott.emp     e
  GROUP BY  job
  ;
  

  to achieve these results:

  JOB              CNT MIN_LOC
  --------- ---------- -------------
  CLERK              4 CHICAGO
  SALESMAN           4 CHICAGO
  PRESIDENT          1 NEW YORK
  MANAGER            3 CHICAGO
  ANALYST            2 DALLAS
  

• Why this word on the next line on the left is to align?

  Hi all!

  First of all, sorry, but I'm not familiar with "Terms of InDesign", so I'll explain what the problem is in my own words

  I had this problem before and google it every now and then, but don't seem to find the right answer.

  So this is the problem;

  Sometimes, when I put the text to the left, words just randomly will be to go to the next line, although there is still plenty of room for the word on the first line...

  I have attached a picture - the word "ask" is on the next line, but as you can see, it'll hold as well on the first line...

  Why oh why does this phenomenon happen?

  Any help is appreciated!

  
  

  Because he's trying to balance all the lines in the paragraph of the best possible.

  If "asking" returned a line then that would mean that "diastrous" do not fit on the line below, and you would get very uneven lines.

  This is known as a composer of single line and paragraph composer and is accessible in the paragraph Panel Menu

  http://help.Adobe.com/en_US/InDesign/CS/using/WSa285fff53dea4f8617383751001ea8cb3f-6d97a.h tml

• Setup has encountered an unexpected error installing this package. This may indicate the problem with this package. The error code is 2705.

  When I creat the project setup in Visual Studio 2005 with only cvirte.msm merge module installer finished the unstallation successfully, however, prompted Mesa. DLL. when the NImesa.msm is added to the installation package Setup fails witht the error code 2705. The exact message is indicated as "subject".

  How can I overcome the problem?

  Hi nikki7,

  You use a non-English operating system? If you are, then the article knowledge base, I've included below should be useful. I hope this helps!

  Error-2705 on MSI Installer generated with the generator Installation Visual Studio .NET: http://digital.ni.com/public.nsf/allkb/19CA3B8F15B4FB9386256DDA006DFED8?OpenDocument

  Kind regards

  Jason D

  Technical sales engineer

  National Instruments

• Will I have to reactivate windows 7 after this update of the problems?

  I've been using Microsoft Flight Simulator X Demo for a few weeks, but my material is not good enough to get a reasonable rate.
  I love the program, so I bought a copy of Microsoft Flight Simulator Gold edition.
  Before installing my copy of FSX Gold, I would like to update some of my hardware.

  My current set up is:

  Windows 7 Professional w/SP1 64-bit bought Jan 2012
  ASRock M3A770DE 770 Socket AM3 8 Channel Audio ATX motherboard.
  AMD Athlon II X 3 455 3.3 GHz Socket AM3.
  Memory: Crucial 8GB Kit (4GBx2) DDR3 PC3-12800.
  ATA (boot) hard drive ST3200822A (200G) purchased 2006 Jan.
  Silicon image Sil 3114 SATA Raid controller.
  Card PCI-E SAPPHIRE HD 6450 1 GB DDR3 DVI - VGA - HDMI
  DVD - ROM drive.

  I intend to do the following:
  Keep the original motherboard Asrock M3A770DE, Crucial memory, raid controller and DVD - ROM.
  Upgrade the processor AMD Athlon II X 3 455 with an AMD Phenom II x 6 1100t.
  Update the graphics card Sapphire HD 6450 with an Asus Nvidia GeForce GTX 750 Ti.
  Replace the hard drive ST3200822A with a 250 GB WD Velociraptor, the ST3200822A is eight years and well beyond its life expectancy.

  The old processor and graphics card is going to be scrapped because they are very little value.
  The old ST3200822A will be partitioned and formatted.

  This will give me problems with the reactivation of windows 7?
  I can't afford to buy another copy of Windows 7.

  Thank you very much
  Steven.

  Yes, since you do not migrate the motherboard, you should be good. You will still need to reactivate by telephone but, so keep this in mind:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Why this code calls the same url?

  HI im to create a web page in flash and im using this code for the navigation buttons:

  bio.addEventListener (MouseEvent.CLICK, buttonClickHandler);
  function buttonClickHandler {}
  navigateToURL (new URLRequest ("bio.html"), '_self');
  }
  paquetes.addEventListener (MouseEvent.CLICK, buttonClickHandler);
  function buttonClickHandler2(event:MouseEvent):void {}
  navigateToURL (new URLRequest ("paquetes.html"), '_self');
  }
  bodas.addEventListener (MouseEvent.CLICK, buttonClickHandler);
  function buttonClickHandler3(event:MouseEvent):void {}
  navigateToURL (new URLRequest ("bodas.html"), '_self');
  }

  The problem is that when I publish cela and place it in Dreamweaver, all three buttons link to "bio.html.

  Thank you

  You could probably have found the problem. But in the case you do not, paquetes.addEventListener (MouseEvent.CLICK, buttonClickHandler); should be: paquetes.addEventListener (MouseEvent.CLICK, buttonClickHandler2); and bodas.addEventListener (MouseEvent.CLICK, buttonClickHandler); must be bodas.addEventListener (MouseEvent.CLICK, buttonClickHandler3); Simply remember the '2' and '3' in the headphones of the respective function.

• Windows Update, in particular, is the cause the internet connection problem? Why Microsoft is not the problem?

  Twice in the space of a few days our internet connection has been disabled. System Restore solve the problem - temporarily. It would be good to know exactly which file is causing the problem.

  I applied all the updates of Windows 7 on 5 computers and encountered no problems.  You use McAfee antivirus by chance?  There was an update for that because of the problems of Internet access for some.  Check with McAfee, if you use that.

  Good luck.

• Why El Capitan has the problem of spinning ball

  Since I upgraded to El Capitan, I get a ball of rotation for almost 20 seconds every time I click on the mouse.

  Why Apple does not solve this problem with the update of last month?

  Post an Etrecheck report here.

  http://etrecheck.com/

  and if you run any Mac AV, a 3rd party utility, remove it according to the directions developers (for example just don't throw in thrash and think it's gone, it's not)

  Until you start with the beach balls are usually caused by their existence on your system.

• Why this dot on the typedef table indicator strict coercion?

  Why is there a constraint on the second point control?

  I created a table of 3 trivial elements of doubles and created an indicator by right-clicking on it in the block diagram. It is the control of "CreateIndicator".

  Then I did the same thing to create a second indicator on the same wire from the selected Panel and output it he adapted to a strict typedef, saved and applied the changes. It is the control of "CreateIndicatorThenCustomize". There one point of coercion in this regard, if. Why?

  Thanks to anyone who can shed some light on this for me!

  Don't get started me on the "point of constraint = copy of the buffer" falicy (hm, I think you just!)

  It this case LV says you type conversion non-defed in type-def, who all had there.

  Ben

• My elemets 10 does not allow me to upload photos since I bought a new canon, the camera says error message file types were not there is an available update? This would solve the problem?    Thank you

  y at - it a update for the 10 items that would solve this problem?

  you are far track.i never said anything about opening raw files... I can't download photos from my new canon camera telements 10 will not accept the unit cr2 files, but the canon software (will professional digital photo...) I have no problem download from my Nikon DSLR in items 10.

• Why this request does not give an error?

  The query below is from the HR schema that is included in the database.
  If we separate the subquery gives us an error, but if we execute all of the query, execute it, and sends us a result (fake, of course).
  
  SELECT last_name, department_id, job_id
  Employees
  WHERE department_id = (SELECT department_id
  Sites
  WHERE location_id = 1700);

  Hello

  Welcome to the forum!

  user7363993 wrote:
  The query below is from the HR schema that is included in the database.
  If we separate the subquery gives us an error, but if we execute all of the query, execute it, and sends us a result (fake, of course).

  In fact, the results are correct. Not what you were expecting, maybe, but they're right.
  If the request is reasonable or not is a separate issue.

  SELECT last_name, department_id, job_id
  Employees
  WHERE department_id = (SELECT department_id
  Sites
  WHERE location_id = 1700);

  If you simply run the subquery, you get an error because there is no column called department_id in any table that is in the scope. (Places would be the only scope table; in fact, the places would be the only table, period).

  What you posted is a correlated subquery . In a correlated subquery, you can reference columns of the query of the mother. Employees and locations of the tables are in scope in the subquery.
  It might be easier to understand if you wrote the query like this:

  SELECT  last_name
  ,      department_id
  ,      job_id
  FROM      employees     e
  WHERE      department_id = (
                           SELECT  e.department_id
                     FROM    locations         l
                     WHERE   l.location_id   = 1700
                 )
  ;
  

  It is 100% equivalent to the query you posted. I wasn't to give alias names to all tables and qualify the column names with those aliases in the subquery. Since there is no ambiguity (i.e. department_id exists only in the employees table and location_id exists only in the table of communities) the compiler doesn't care if you qualify the columns with the table alias or not.
  (Even if the same column exist in both tables, you would get an error. Locations being the only table in the FROM clause in the subquery, the compiler assumes that all of the columns named ambiguously came from this table.)