Why VIP and public IP must be in the listener.ora file

Similar Questions

• in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  Perhaps because Acrobat 8 is not compatible with Windows 7 or 10.

  Friday, October 9, 2015 at 22:11, thosdelaney [email protected]>

• I need to know what I burned on a CD yesterday... The CD is now in the mail, and I want to double check the names of files that were included on the CD.

  I burned some files on a CD yesterday... Then I stuck the CD by mail and sent it back. I have several versions of one of the files I burned. My Question: I can see the file names of the files that I copied on the CD? I know normally it says: "You have files waiting to be burned to CD", so he must track/backup the files somewhere? Can someone tell me if I can find out what files have been included, and if so, where to find the file names?

  I use Windows XP Professional SP3 if that helps.
  Thanks in advance for any answers you have!

  Hey Anthony232,

  I don't think that information is kept, if you just burn through your windows Explorer, there is no file history recorded burn to return too.
  I hope that this answer was helpful.

• Any way to take a subelement and generate a new length of the subitem original file without recapturing?

  When I CAPTURE a great length of footage (say 30 mins) and then import these images into my 5 CS Pro Pr project, I generally extracted a section of this sequence in the timeline using the Source monitor.  I'm going throughout the upward using several (subitems) parts of this film original edit.  Sometimes I'll make specific subliclips, sometimes I just use different instances in the chronology of different lengths.

  I want to be able to easily make must then create a new original file for each clip edited so that each piece is not referencing the same full serving of originally captured images.  I'm trying to create smaller files that are referenced.

  In other words, I guess you could say I'm looking for a way to "capture" in the opposite direction?  Rather than having to go back and resume just the part that is now published as a subitem, is there a way to easily proceed backwards?

  It would be ideal if there was a command that has taken your subelement and simply created an original file that was now simply the length of your final edited clip or a piece of the time line.

  I'm trying to reduce the size of the original file has to be referenced by Premiere Pro each time to speed up the editing process, but without having to go back and redo the capture process.

  Each section of the export. (ie. export each subelement)

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• Have windows 7 installed and office 2007. Cannot open the old excel files. Error reading .xlsx is not a valid Win32 application

  Have a new laptop with Windows 7. Responsible for Office 2007. Cannot open the old Excel files. Get the error reading .xlsx is not a valid Win32 application when I try to open the file.

  Right-click on the Xlsx file and select open with.  Then find Excel and make sure that it is selected to always open with this program.  Click OK, and then see if it works

• Project of bloating and repair in Premiere Pro CS6; The Max project file size? Adobe welcome coders...

  Greetings.

  After a few sessions, navigation I have not found a specific problem within a bloat of project management. First; We are always backed up. I have a copy of the restoration of the project to which I have referred herein. Verify that the list.

  Several people have posted here and around Creative Cow with problems about a growing using CS6 file size; I look at the files range from 300 MB to 2.8 GB. The unfortunate problem is when the project crosses a magical line that translates into an inability to open, import, export or access the sequences contained therein. Has anyone addressed a solution to repair the first CS6 save files? Reduce file bloat? I saw nothing (remember the days of repair FCP7... of solutions exist because the problems were frequent; fortunately not so bad with Adobe).

  Know someone inside the code size file size maximum project first can read? I've created a monster... More than 200 sequences using 4.5 TB of sequences, which extends from Red EXCam MPEG4 and H264 codecs. And for a while, the size of the project was manageable. Then, it inflated. And one day stopped randomly opening. No of auto-enregistre it open.

  Just curious. The files are not the problem, but the 2.8 GB backup file is. Specifications of the machine / / etc. are freely available, if needed. a lot of ram, no problem with all projects (just that one beast).

  See you soon,.

  Jon Michael Ryan

  The problem lies in the automatic backup. Disable it. Turn 200 minutes. Save the project yourself. Make your own auto save folder. It has everything, but he healed for us. Now it's turn to Adobe to fix it.

• Newbie: Mobile Server and Oracle DB must be on the same server?

  Hello Forum...
  
  I have problems to install the mobile server (ver. 10.3.0.2.0).
  
  First of all, I tried to install within an instance of the OAS (ver. 10.1.3.0.0) - I could not set the password of the mobile server oc4j account in enterprise manager server application and is stuck there. Also, I couldn't connect to webtogo as mobile server administrator.
  
  Second, I have installed the version of stand-alone mobile server, but when I run the 'runmobileserver.bat' I get the following error:
  
  09/08/22 12:54:21 log9: connect as: MOBILEADMIN
  09/08/22 12:54:21 log9: Mobile Server ID not found, impossible to register.
  09/08/22 12:54:21 log9: java.sql.SQLException: ORA-00942: table or view does not exist
  
  Like the previous time, I couldn't connect to the webtogo as mobile server administrator. [OS: windows 2003 Enterprise in both cases]
  
  I was informed by my dba that Oracle mobileserver will work only if it is installed on the same server as the backend database. Is this true?
  
  Thank you
  j - p.

  Hi J - P,

  When you installed the mobile server in stand-alone mode, repwizard was not performed or has failed.
  Try to rerun repwizard with: $ORACLE_HOME/mobile/server/admin/repwizard
  You can check the log file in $ORACLE_HOME/mobile/server/repository.log to see if there is a critical error,
  the repwizard should save your mobile server, you can consult this table: mobileadmin.mobileserver_instances so you can see your host name and port.

  On the Mobile Server OAS installation, you should not need to use the oc4jadmin password as if you installed OAS 10.1.3 and run the runinstaller lite Oracle to install Oracle lite 10.3.0.2. in the same ORACLE_HOME with run of the OAS, it should automatically deployed the mobile server j2ee application in the OAS.

  Kind regards.
  Marc
  PS: To change the OC4JADMIN password you can use the note: Note.460314.1 Ext/Pub cannot establish a connection with OC4J instance mobileserver on application server

• Why my hotmail attachments come to me in the form of files zip only

  I get emails with attachments and all other documents or photos are coming as zip download not the jpeg option as they did a week ago. What changes and how can I change this? I don't want the downloaded as zip files.

  The game may 10, 2012 13:02:50 + 0000, danicash wrote:

  I get emails with attachments and all other documents or photos are coming as zip download not the jpeg option as they did a week ago. What changes and how can I change this? I don't want the downloaded as zip files.

  The format that you get an attachment in the format is that the sender
  has chosen to drop it. If they are zip files, it is because that the sender
  send the zip files.
  You cannot change the format it sends in. You should ask at the
  why it made the change of the sender.

  Ken Blake, Microsoft MVP

• Why external hard drive shows as 'volume' below the hard drive files? LR5 | 10.10.1 Yosemite

  Why is there a new folder, i.e. by car Ext., why is - a new folder, either drive Ext., no projection in LR5? New folder appears as 'volume' below the files from the hard drive. Is this something new on Maverik10.10.1? Worked normally in Maverick. LR5 display? New folder appears as 'volume' below the files from the hard drive. Is this something new on Maverik10.10.1? Worked normally in Maverick.

  Whoa hold on.

  So I went back and put a picture in the folder

  Then, when the library of LR model came with the disk in it, now

  I was given an option to add to my catalog and the button import was direct.

  Clicked on it AND the drive with the green bar and folder to archive appeared

  as they should have.

  I think it's done. Back in business. Now I can copy on my k 32 photos.

  Thank you very much!

  Neal

  Wednesday, January 14, 2015 15:22, Neal Weinberg [email protected]>

• Categories, the application and configuration settings not migrate in the exported XML file

  We have exported our FDM of an environment and it application another via XML file imported. We have experienced several issues highlighted on the link below. In addition, the control of 'Catégories' table is not migrated at all and there seems to be no option to import or export step on the control panels. In addition, I find that many other parameters have not been migrated, such as:
  -Administration | Configuration settings | Allows a custom period description
  -Administration | Application settings | Batch charger
  -Administration | Application settings | Format of Date key time mask
  -Etc etc
  
  Please can anyone suggest why they have not migrated successfully? It's quite frustrating because at the present time, we have to recreate settings manually in the following environment and the control panel. Y at - it a potential bug here? We use FDM version 11.1.2.1.
  
  -2147418105-error automation on FDM application via XML file import
  
  Published by: Jubei on June 12, 2012 16:20

  You import the adapter. These tables are specific adapter and that may be your problem.

• FireFox does not start due to message ssl3.dll is missing, and indeed it is not in the folder program files. But I can't seem to be able to reinstall Firefox or copy the ssl3.dll file in the program folder files. Help?

  Webroot identified ssl3.dll as a threat and deleted. Now, I can't start Firefox, nor can I copy ssl3.dll in the file Firefox program. I tried to uninstall Firefox and reinstall, but it always shows an update and does not seem to add ssl3.dll. Help?

  See also [904266/questions/904266]

• When you install age of empires 3 it progresses quite far ahead, it reports an error and to check whether or not the sound.bar file on the disc (cd 2).

  I ask to check if the file sound.bar is on is the cd or not. I'm unable to explore the disc on my computer to determine if the file is there or not. Overall, the progress bar indicates that the installation was almost complete. There are some light scratches on the cd. All solutions? I'm unable to explore the disc on my computer to determine if the file is there or not. Overall, the progress bar indicates that installation was almost over before I got this error message. Is there any way to get this file, as I suspect the cd is damaged as it has a few light scratches on the cd. All solutions?

  Hello

  1. don't you try to install the game in the other computer with the same disc?

  If you are not able to install the same game on another computer it clearly seems to be a problem is with the CD, then I would you to see link and check if it helps.

  How to replace lost, broken, or lack of Microsoft software or hardware: http://support.microsoft.com/kb/326246/en-gb

  For your information:

  Error message when you install a program of mapping or game from Microsoft: http://support.microsoft.com/kb/258496

  Hope this information is useful.

• Why is - 1, 5 giving an error about the opening.wav files?

  I recently bought an Olympus VN-8500PC digital voice Rrecorder, but when I try to open the .wma files created in hearing I get an error message "undefined external error" output device files will be open to WMA, very well. I am running Windows 7, but have been lucky so far to this Audition 1.5 is fine.

  AA1.5 should be able to open these files without difficulty, certainly. You have several options here - first, try reinstalling this has been known to heal all sorts of problems which, at first glance, do not feel. Second, posting a small file somewhere so that someone else can try to open it, because it is just possible that this is a non-standard file (although it shouldn't be). Third, it is possible that it is a legitimate file, but the header is not recognized correctly. To test this, try to open it as a RAW file and then saying hearing that he is in fact the WMA data - if it opens then, it is certainly the offending header.

• why I can't manage the listener by EM?

  Dear Sir
  
  I am trying to remotely manage the file listener.ora for an instance of database 10 g called FINANCEIRA (the operating system I use is the Windows), using the EM Database Control. I'm following the steps below to do this:
  
  1) access to the Administration of Services Net screen;
  
  (2) choose the listener to the Manager option.
  
  Note: the path of the listener configured on the server is "C:\oracle\product\10.2.0\db_2\network\admin".
  
  where
  
  ORACLE_HOME="C:\oracle\product\10.2.0\db_2\".
  
  The EM control works very well... the problem is that, once the option of the listener is chosen and I click OK to move to the next screen, an error message is triggered by asking me to check if the path 'C:\oracle\product\10.2.0\db_2\network\admin' is valid and the operation is aborted.
  
  I checked, the path is OK... There's a listener.ora file, for sure. It can be confirmed because when I chose to administer the tnsname.ora file, the process works. So, why not work for the listener.ora file?
  
  TKS

  Well, that's a stupid question and I don't know what is the reason for this. But here is what works for me when I have this problem, hopefully it would work as well for you.

  (1) go in $oracle_home/network/tools
  (2) in the Netproperties file, comment out the line INSTALLEDCOMPONENTS = ORACLENET

  It should work after the comment line. Do not post feedback after doing so.

  HTH
  Aman...