Why when I cut my selection of the quick mask in Photoshop it is suddenly just a cup a smaller version of the opacity of the image?

Similar Questions

• Why when I backup after selection keep only last system only the old image image is maintained?

  Why when I backup after selection keep only last system only the old image image is maintained?

  Hello

  ·         What operating system is installed on the computer?

  ·         The computer is connected to the domain network?

  If you are using Windows 7 then you can try the steps mentioned below and check to see if they help.

  When you schedule a backup on your computer, all the backup files would be automatically and replaces the old backup data.

  You can follow these steps below to remove the system image backup.

  1. open the control panel (all items view).
  2. click on the backup and restore icon.
  3. as the backup, click on the link manage space.
  4. to select a backup location-
  NOTE: This is for which the backup of files the user is located in. If the backup location is already displayed, go to step 5.
  (A) under the backup location, click Browse.
  (B) go to the backup location and select it.
  (C) continue to step 5.
  5. under backup of user files, click View backups button.
  6. Select the period of backup that you want to remove, and then click Remove.

  See also:

  Learn more about the system image backup

  http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx

  Should what backup settings I use to maximize my disk space?

  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

• When I make a selection using the lasso and try to copy the selection, nothing is copied.  Why?

  I have PhotoShop CS6 for Mac, version 13.0.6.  When I make a selection using the lasso (or any other selection tool) and select 'Copy' and try to move the selection copied, nothing is copied.  What is going on?  I can't find an answer in my search for Abobe PS or the Web site, in general.

  If you still use the selection tools when you try to move the contents of a selection, it will simply move the selection. If you want to move the content, use the tool move (but be aware that the default action is to cut; use Opt (Alt on Windows) to copy the selection by dragging).

• Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.

• When a program is selected in the section programs of all, and the word "Uninstall" is clicked, nothing happens.

  Impossible to 'Uninstall' any program.  When a program is selected in the section programs of all, and the word "Uninstall" is clicked, nothing happens.   When the dialog box "Turn Windows features on or off" is selected, no buttons appear.   Having run "System Restore" to solve the problem without success.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: If the problem persists then I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Why when I turn on my Mac, the InDesign program open at the same time?

  New problem on my Mac. Why when I turn on my Mac, the CC InDesign program open at the same time? Absently, I probably activated something in the program! Can someone tell me how to disable this feature in Indesign? Thks for helping me!

  Go to System Preferences > users & groups > login items. If InDesign is there, just delete.

• Why I get a horizontal framework when I placed a portrait of the image?

  I have no idea how this started happening, but am sure it is a scenery and I can't seem to figure it out, to ask for help on this. I noticed that when I placed a portrait of the image in my InDesign file, I get a horizontal framework when I place the file. I'm click-and - drag the file when I place and that's what happening (screenshot below). When I click to place without slipping, weather and the container is the exact shape that image, which is what I want.

  My block of editing Options are all set to "none". Any ideas on how to solve this problem? Thank you!

  

  I think that this is a problem with how the image data are turned into the camera. Try to open one of these images in Photoshop and he re-record as .psd and see if that makes a difference.

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.

• In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  Hi Tanuj.

  I actually understand it. Not the best user friendly system. Where as before (CS5), I just had to go to crop tool and choose the dimensions and the inches now it in the window. Just really complicated for nothing.

  Thanks anyway Tanuj

  Melanie

• In "Add/Remove Programs" he has no option to remove when a program is selected in the populated list?

  I can see all of the programs listed in Add/Remove Programs option in the control panel.  When I select a program in the list, there is no option to remove / uninstall the program.  I tried a lot of programs and none give me the option?

  Hello
   
   
  Method 1.
  Reregister the install and check engine.
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver
   
   
  Method 2.
  Check if you can in safe mode. Note: you will not be able to uninstall programs in safe mode. It's just to check if you can.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 3.
  It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  
  Method 4.
  See also the steps listed in the article below.
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help in the selection of the image...

  Hello

  I'm kinda a beginner so please be patient with me!

  I have searched high and low for the answers I need, and although there are related subjects, nothing is quite as precise I need as it is...

  I'm an artist/Illustrator working in gouache on watercolor paper. When I scan my works in the texture and color of the paper are supported and I need a way to select my image with precision and then copying it on a white background, new or just make the white background.

  I tried the quick selection and magic wand tools, but if my work is quite detailed with a lot of jagged edges (and a variety of colors), you can imagine it's a nightmare getting a good selection. I also tried using an adjustment layer and raise the level of white, but everything in it contributes to the background he throws the rest of my image.

  My current method is to make the changes that I need (contrast etc) and then erases (or paint) the background. This works well but the problem is only on my very detailed parts, with the work around the hairs and the pieces of grass and others, it is taking me hours and hours (hours and hours) and I worry about missing sections / lack of precision.

  Is there an easier way? Anyone in the same boat? I don't mind if it's the only way to do it, I myself would come only if there was some fancy shortcuts, I don't know!

  Thank you in advance to anyone who can help...

  Kate

  

  1. open the file and trash of the lock of background layer.

  2 press and hold the command key and click the new layer icon in the layers panel. He will place a layer below the layer of the image.

  3 Edition > fill and fill it with white.

  4 return the layer of the image, and then double-click it to bring up the layer Style.

  5 perform the indicated setting. To split the slider, hold down the Opt key

  (Unreduced 300 ppi size, the end of the highest point of the scale is a tad stronger)

  ***

  In order to demonstrate that the background is white flat, I changed the white to black

• Can Thunderbird offer the possibility of images slect, via the thumbnail option, the selection of the images into the body of the email?

  • • Thunderbird v.38.4.0 *.

  Not sure if the title makes sense, but I'm trying to find out if there is an option for Thunderbird display images as thumbnails, when you search for an image to be inserted into the body of an email? In other words, is possible that I can see what the images are, through Browse, before I "insert" in the body of the email. IE: thumbnails?

  Usually, it would be somewhere in the display options, where you can choose the size of icons, but the look on things, I don't think there are a thumbnails option, but I wanted to confirm this.

  If this isn't the case, it is a great option for future generations. It just makes so much more easier if embed you images, rather than tie them.

  Kind regards
  b1rd

  It shows the photos here for large or medium-sized icons, win 10. Open File Explorer and look at the display settings under Options files (see photo).

• 9000F Mark II - cannot select "activate the image large scans.

  When I go to scangear, advanced mode, preferences, scan and try to choose "activate the image large scans ' I can't, because it is grayed out.  What Miss me?

  Hello.

  This should be enabled from the utility of scanning IJ.  Please, perform the following steps:

  1. open the utility of scanning IJ.

  2. click on settings.

  3 click ' Scangear tab on the left.

  4. check the box to activate large analyses.

  Once done, click OK.

  It has not responded to your question or problem? Find more help contact us.

• Creation of a Script of Action to cut individual corners on the images in a document.

  Hi all

  I am a wedding photographer and my album designs involve changing the images to round individual corners according to the flow of the page. Currently, it takes much more time than I like it too and I was looking for a way to contribute to this process take less time.

  I currently use the rectangle tool, change to the size of the image and round up the necessary angles with the properties box, then hide the image with the selection of one.

  Would it not possible to create an action that could automate this process for each design corner that I use? (IE every single corner, the two upper corners, etc.).

  I tried looking everywhere and for the life of me cannot understand it at all.

  Hope it makes sense.

  Kind regards

  Kelsey.

  The solution proposed by JJMAck is probably best suited to your needs, if the creation of album pages.

  However, to answer your direct question - it is possible to create an action that will apply to every angle of an image little matter the size of the image.
  The principle is to save a path in an action that makes a curve at the top left - then invert the whole mask, regardless of the image and repeat the curve at the top left of each time until you get the corners you want.

  For example, to get the curves on the leash across (up and down) record measures include:

  1. Add a layer mask to the layer revealing all

  2. click on the link (between the image and the mask) to untie the mask

  3. draw a path on the left in the form of a curve - once closed and drawn by clicking on the top right of the palette actions and click "insert the path." This will put this path in your action.

  4. click on this way of work in the palette traced, and then on the way to loading as a playlist

  5. click on the mask

  6 change the black fill (which will create a curve in the mask at the top left
  7 edit transform Flip Vertical-(cela sera retourner le masque uniquement, quittant la courbe en haut à gauche en bas à gauche)

  8. click on the way to work in the palette

  9 load path as a selection

  10 click mask

  11 edit black fill (which will create a new curve on the mask to what is now upper left

  12. click on the link to reissue the mask to the image

  Variations on that can be used to update the rounded corners in any of the four corners (although it is always drawn on the mask at the top left) - so be independent of the size of the image.

  I hope that helps

  

  Result:

  

  Dave

• How to select all the images used in a project?

  Is there a way to watch and selectt all the images and drag them to a separate folder. You can view and multi select topics from the topic... Viewer

  N °

  PLEASE request a feature that more people who do, more likely to occur. Please follow this link.

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=38

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge