Why windows 7 don't overwrite not the names of existing files

Similar Questions

• Renaming of documents by adding an annex of the commune for the names of existing files on several files in a single folder

  Is it possible to add an annex to the town (for example "-file BL ') existing file name (for example"daily reports1) to several (selected) files in the same folder?  (The example given could therefore be renamed "daily reports - comes from the BL file").  I need to do this to identify the source of documents folder when they are copied into a common folder: to compare with the similar files in other folders for various purposes.  There are a lot of documents in many files, I need to transfer and compare.  A rough estimate, it is that I need to add an annex to the town of 200 files named differently in a single folder and repeat this process for 30 files: with my existing knowledge of XP, this means that I would have use the rename individually on 6000 documents, and if the additional annex has been say 5 characters which would be a minimum of 30 000 key strokes : If adding appendages common to several document names selected in a folder is possible, this might reduce the name change to close to 150 list.

  PLEASE NOTE the multiple rename function where each selected file is the same thing with a renamed after the index number in brackets should not be - the original file name should be kept.

  Hello

  Refer to the link below and check if this may help:http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/1b0deaf4-8416-4e03-aa9c-e3ce1259866b

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.»

  from scratch

  I had to pull the battery on my dell p.c.Now I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.» My screen there "list of questions and I n" t have the answers, it is a PHOENIX, I care. Can anyone help?

  Follow this. It should guide you through the configuration of your BIOS.

• Why windows media player displays only the names of original files?

  Windows Media Player only shows the original file names that can be confusing if I changed the name of a file. The name of the file (usually audio files) is correct in Windows Explorer, but in the component list of WMP, it's often the old file name. Why is this and what can I do about it? Advice would be appreciated. TA. Kevin.

  What the file type of these music files (MP3, WMA, WAV...)?

  WMP usually displays the title tags of the music file, which is independent of the file name. However, WMP always displays the current file name in the path column of the file, which can be activated by right clicking on a column header and select choose columns.

• Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted

  Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted.

  I have also changed the CLASSID HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {BDEADE7F-C265-11D0-BCED-00A0C90AB50F} / instance DontRefresh value to 0

  Hello

  (1) have you made changes before the start of this issue?

  (2) what happens when you try to start in safe mode?

  To start your computer in safe mode, you can see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  I suggest you to place the computer in a clean boot state and check if the problem is resolved:

  1. sign the computer by using an account with administrator rights.

  2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  3. on the general tab, click Selective startup, and then click on to clear the load startup items check box. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  5. click OKand then click restart.

  6. check if you still have the problem.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual after you have finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start , type msconfig.exe in the Start Search box and press ENTER.

  1. If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart.

  If this does not work, try to run a SFC scan. To do a SFC scan follow the steps below:

  Use the System File Checker tool, which is also called scan SFC.

  File system (CFS) auditor verifies that all Vista system files are where they should be as they are by default and not corrupted, changed or damaged.

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select Run as Administrator.

  2. click on continue or provide administrator credentials if prompted.

  3. in the command prompt window , type the following, and then press ENTER:

  sfc/scannow

  4. you should see messages on the screen the following:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  5. once scanning is complete, check to see if the problem you are experiencing is resolved or not.

  Hope the helps of information.

• I created signatures and look OK in preferences, but I can't use them.  It worked once, but I don't know how or why.  I don't get all the dialog boxes.

  I created signatures and look OK in preferences, but I can't use them.  It worked once, but I don't know how or why.  I don't get all the dialog boxes.

  Thank you.  I read the article you quoted, as well as others, several

  times.  Creation has been problem free.

  My problem is that AID has never said, that I could find, HELP or

  TIP to search for a tool called certificates.  I searched,

  Signatures, Signatures Digital and many others but they lead no where.

  I think that HELP need HELP.

• Why squeeze foutmelding ik "Drive has not the ability to access this service" als ik een try PDF you i.e. Excel, said very wel naar in mijn subscription zit?

  Why squeeze foutmelding ik "Drive has not the ability to access this service" als ik een try PDF you i.e. Excel, said very wel naar in mijn subscription zit?

  Hi marcb53473002,

  Make sure that you use last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the services of export it to PDF help of Acrobat Reader | Export PDF to Acrobat Reader DC , as older versions does not now support.

  Alternatively, you can use export to PDF of https://cloud.acrobat.com/exportpdf online service

  Kind regards
  Nicos

• I can create it but not the NAME of a new folder... any suggestions? Vista SP2 Marty

  I can create it but not the NAME of a new folder... any suggestions?  Or as the administrator or user, even when the user is an administrator.  GACK!  This is new behavior, week or two...  Vista SP2 Marty

  Hi Marty_McGrath,
   
  I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, the following line, and then press ENTER:
  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.
  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• When you rename a file highlights only the name and not the name extension.

  Hi all

  When I rename a file, it highlights only the name part of the file name and not the name extension.  I need the name of entire file highlighted when I rename a file.  Where is the setting to change this?

  Thank you

  Pete

  Hi Pete,.

  Engineers also writes a blog on why they made this change, but to prevent millions of calls to support technical questions "I renamed my file and now it no longer opens.
  It might be possible to change this behavior with editing the registry, but I couldn't immediately find a reference to such a value.
  However, I have a workaround.  I usually press F2 to rename a file (I'm a lover of keyboard, hate having to use the mouse).  So I click on F2, then if I need to select both file extension, I can make one of these:
  • Press Ctrl-A
    or
  • Press SHIFT - end

  I generally use the method of shift - end because it's closer where my fingers are already on the keyboard (I'm a lover of keyboard, but I'm too lazy).  Hope this helps at least a little.

• Creative Cloud Lightroom import records show that year and not the name of the file that I created

  When I import files from an SD card to Lightroom, I import to an external drive as my file.  Indicates the name of the folder to the year (2015) and not the name of the file that I created (Fort Worth, 12152015).  This has happened with every import that I've done so far.  How can I fix it?

  The copy option is used to copy the files from your camera card. The Add option is used when the files are already on your hard drive. They must be copied, just added to the Lightroom Catalog. You can simply add the files that are located on a map of the camera. They must be copied to the hard drive first.

• It seems that FFv.12 does not allow Scandinavian letters in the names of downloaded files, but gets stuck all by contacting the localhost?

  I do a fileupload page and it seems that FFv.12 does not allow for Scandinavian letters in the names of downloaded files, given that the browser gets stuck trying to communicate with the local host. Fix? This behavior differs from that of other browsers (IE, Chrome, Opera and Safari).

  That are Unicode characters in the name of the file or the characters in the top 0 x 80-0xFF range?

• How can I get the user name of the current user? Not the name of the user, but the user name is connected to.

  Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.

  Thank you!

  Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.

  Sounds to me like you may need to get hands on with the services of a JavaScript programmer.

• Jobs recording under the name of temporary file

  Hello fellow Scripting Guys!

  //  Save the open file to the new direct to print folder as EPS with artboard enabled.
  
  #target illustrator-19;
  
  
  var newName = prompt ('enter in the new file name', "DJ", "Saveing to STE with new name");
  
  saveFileToEPS();
  
                 var w = new Window("palette","Saved To STE Printer",undefined,{closeButton:false});
                      w.add("statictext",undefined,"File has been saved to STE Printer");
                      w.show();
                      $.sleep(100);
                     w.close();
  
  function saveFileToEPS() //  saves the file to the server as a .EPS document.
  {  
      var thisDoc = app.activeDocument;
      if ( app.documents.length > 0 )
      {
          var saveName = new File ("folder location" + newName);
          saveOpts = new EPSSaveOptions();
          saveOpts.compatibility = Compatibility.ILLUSTRATOR13;
          saveOpts.generateThumbnails = true; 
          saveOpts.preserveEditability = true;
          
          saveOpts.artBoardClipping = true;
          saveOpts.saveMultipleArtboards = true;  
  
          var currentArtboard = app.activeDocument.artboards.getActiveArtboardIndex();
  
          saveOpts.artboardRange = currentArtboard + 1; // artboard # of the currently active artboard
          thisDoc.saveAs( saveName, saveOpts );
      }
  }
  

  I got the code above and when she runs 2/3 of the time, it runs great but the other 1/3 of the time it fails to rename and files are saved under the name of temporary file A1 #.  Is it possible to add a fail safe module to this?  Maybe do create the new file in a folder, make sure that the file has the file, and THEN move the file in this folder into the right pair?

  I annotated the popup code section and I don't see the problem more.  Something in the code below was he locked up and renaming does not...  Good times with the scripts!

  appreciate your help Silly-V.

      /*           var w = new Window("palette","Saved To STE Printer",undefined,{closeButton:false});
                      w.add("statictext",undefined,"File has been saved to STE Printer");
                      w.show();
                      $.sleep(100);
                     w.close(); 
  
  */
  

• The names of source files are larger than is supported by the file system...

  "The names of source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation. »

  There are about 10 subfolders on the computer. None can be deleted, moved, or renamed without one appearing in the message. I tried UNLOCKER ASSISTANT & DELINVFILE get rid of this file. Once more, none worked. Command prompt did not work as well. Please help me, this issue will not go away on my desk.

  Try first to remove bypassing the Recycle Bin using SHIFT-DEL(thanks, Michael Murphy) rather than just led

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion and you have to force the deletion in this case: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  Have you tried Unlocker (I don't know if it's the same as Unlocker Assistant) but if this if it is different, gives it a try.

  Here is an article on this topic (related to another topic, but essentially the same problem) with a number of suggestions - which can work for you: http://www.howtogeek.com/forum/topic/how-to-delete-source-file-names-are-larger-than-is.

  I hope that one of these options help.  If this isn't the case, after return and we will see if we can find another answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• To-do bar display of the names of open files

  In Windows Vista, it used to display my documents open in the taskbar with all instances of applications (such as IE) and the names of open files. Windows 7 is not that. Is it possible to restore that? I find it really useful to the click on the right app or the document I want to open.

  David

  Anchorage Alaska

  Right click on the taskbar-> properties-> Taskbar Button :-> select never combine-> Apply-> OK

  See if that helps.