Wi - Fi for 5150C

Similar Questions

• XPS-200 [and Dimension 5150C] memory addressable issue...

  I have a question on a very old PC - Dell XPS-200, Intel D 820 2.8 GHz, BIOS A07 - I am fixing to the top for a friend. Windows 7 Professional installed a 64 bit version of the operating system and properties system reports it as a 64-bit system. However, it shows that, although 4 GB of RAM is installed only 3.2 GB is used which is a message that I expect to see on a system 32-bit.

  As the Council and the processor are both 64-bit components I am at a loss as to why he is not seeing all of the 4 GB of RAM. There use a graphics Radeon HD 5450 and BIOS is set to allow only a very small amount of RAM so I don't think that's it.  According to the Intel chip plug the CPU has a 64-bit set statement and supports the extensions of physical memory on 32-bit, which allows him to address more than 4 GB.

  It seems to work OK and I know that if push comes to shove I can install a 32-bit system. But I understand why it is not recognizing all of the RAM and if there is any kind of patch/fix/update available for this machine that allows him to recognize all the 4 GB of RAM.

  When the XPS-200 [and Dimension 5150C] was introduced at Christmas 2005 were not a lot of choice of 64-bit hardware, so it came with a 32 bit OS, but I see he got an update of the BIOS in January 2007 which I would have guessed had to add extra CPU/RAM support but I can't find anything that describes what the A07 update was intended to do.

  Other suggestions from trash, use 32 bit, etc - I already understand these options :) - I hope that someone has enough technical familiarity with this machine/architecture to respond definitively to know if there is anything I can do to get it to recognize all the 4 GB of RAM.

  Thanks in advance for your help,

  Howard
  Redmond, WA

  PENTIUM D 945 chip sets not 5150/E510.   However, it will work well for 64-BIT windows 7 8 or 10 in a precision 380.

  Full 4 GB or 8 GB is fine precision 380 with 955 X chipset.

• Phone number not an option for iMessage on iPad mini

  Hello

  So my ID Apple was recently hacked and had to change my password on all my devices (iPhone 6 and mini iPad). But now that I changed, my iMessage works well for my iPhone, but on my iPad, I have no option to choose my phone number. I tried to reset iMessage, reset my iPad, everything. Now I'm curious to know why, that's happened what else I can do for an option again.

  Thanks in advance for helping me!

  To go through all these steps?

  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Use this feature with any Mac, iPhone, iPad, or iPod touch that satisfies the requirements of continuity system. Make sure that your devices are configured as follows:

  • Each device is connected to iCloud with the same Apple ID.
  • On iPhone, go to settings > Messages > Send and receive. Make sure the Apple ID at the top of the screen is the same Apple ID you use for iMessage on other devices. Add a check to your address, phone number, so that you can be reached by both iMessage. Do the same on your iPad or iPod touch.
  • On iPhone, go to settings > Messages > transfer, text messages, then choose which devices to send and receive text messages from the iPhone. A verification code and then on each device. Enter this code on your iPhone.
  • On Mac, open Messages, and then choose message > Preferences. Click accounts, and then select your account from iMessage. Make sure the Apple ID shown here is the same Apple ID you use on other devices. Add a control to your phone number and email address.

  Use the SMS and MMS messaging

  

  To use this feature, simply start conversations as usual in the Messages application on any of your devices. Alternatively, you can start a conversation by clicking a phone number in Safari, Contacts, calendar, or other applications detecting phone numbers. All your incoming and outgoing messages on all your devices.

• storage for MAC - air

  About 40 GB of storage used on my mac - makes no sense that I do not use this computer for films or images - just for internet and writing. We already have a projector comb with the hard drive. Any ideas before support again. Very curious.

  Free disk space-

  Space - free (2)

  Space - Free Up - Mavericks

  OmniDiskSweeper full - disk space 10.8 +.

  Up - WhatSize to fill disk space

• I need to buy new RAM for my iMac mid-2011. What are the specific specifications?

  I have a mid-2011 iMac, 21.5 inches, with an Intel Core i5 to 2.7 GHz and 4 GB 1333 MHz DDR3 processor. What RAM memory should I buy? There are a lot of options with different specifications listed on Amazon, and none seems correct. Help, please! Thank you

  Jbdammarell,

  I used OWC computer for my needs memory. Here is their recommendation for your computer.

  

• Function numbers for dynamically on average over the last 30 cells

  I am a trader and I have several months of data. I currently have a percentage of the sum of all the victories and defeats by currency pair. I want to create a function that retrieves the last 30 cells of data and creates a percentage I can compare it to the percentage of total victory.

  The cells are empty, unless I have add data in either to the upper or lower row. 1 win and - 1 are losses. 0 means not configured.

  Here's a full month with 20 data cells (cells max per month are 22) of trading days:

  

  This is the current month:

  

  I have 16 months of data with percentages of victory for all my data. As you see, I also have winning monthly winning percentages easily in the examples above (with a small division). I really, really want to compile data from the last 30 cells with data to create a winning percentage. It would be necessary to sometimes include 3 different lines of different months of data to create 30 cells with a number inside.

  A friend used the COUNTIF command but I do not have it works for me.

  If there is a different website to request this detail of the question please share that too.

  Thanks in advance,

  B

  Hi Braddon,

  It would be a pretty easy task if the data to be summed up in two columns from a single table and had no gaps, but that doesn't seem to be the case.

  Screenshots of two isolated sets of cells containing two rows (railway of) the data to be summarized, but give no indication where these data will be found in the document does not provide sufficient information to start to find a solution.

  Where are the data stored? You say "data for each month." "Every month" is recorded on another table?... on a pair of rows of the same table different?

  In the image (very vague) I, the factors of complications will gather data from a subset of continually changing several tables on multiple sheets and which specific cell contains the 30 most recent reference and is the one to start the harvest.

  While a few details and clarifications.

  Kind regards

  Barry

• Updated for Sierra and cannot import images

  I upgraded to Sierra and my camera, a Canon EOS 20 d is is properly recognized.

  Prior to the upgrade:

  When I plugged the camera would open automatically. I close and open Photoshop. PS I would like to select Import-> device and my camera would be identified. When I select the camer displayed thumbnails of photo.

  After the upgrade:

  When I connect the camera pictures only opens automaticall. If I open the pictures is not a camera attached.

  PS when I select Import-> my camera device is represented, but the icon is an external drive. When I select the icon nothing is displayed.

  Hello ChuckSto,

  Thank you for using communities Support from Apple. I know have a problem with your Mac and your camera is not what you expect. The good news is that the next steps will be useful for your problem of your camera is not recognized:

  If nothing happens when you connect your digital camera

  Try the following:

  • Make sure that the USB cable is properly connected to your camera and computer. If your computer has a USB port, try connecting the cable inside.

  • Check your camera to make sure he turned on and set to mode suitable for importing the photos. See the instructions that came with your camera.

  • Check the memory card of your camera for damage. See the documentation that came with your camera for more information on this page or other potential problems.

  Photos for Mac: import pictures from a camera or a mobile device

  See you soon!

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Get notifications on my watch for app removed

  For my iPhone 6 s and look, I used an application called team Stream by Bleacher report. I chose the preference "not not mirror iPhone" do not get notifications on my watch, but stay get them on the iPhone. However, notifications continue on my watch. I deleted the app on my watch to try to solve the problem but despite the app isn't only not on the watch more I get always constant notifications. Should I delete the app on my iPhone? Very frustrating.

  Hello

  The following steps may help:

  • Close the watch application, and then restart your iPhone and your watch:
    • To close the application shows on your iPhone, click twice on the Home button, and then drag upward on Watch app preview.
    • Close the two devices together, and then restart your iPhone first:
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support
  • If the problem persists, then disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• I resized the Partition Mac to make more space for BootCamp and now Windows will not boot

  On a collague MacBook Air running 10.11.4, we used disk utility to reduce the Mac Partition so that we could then use a Windows tool to extend the BootCamp partition. However, upon restart, we got a BACK screen with the error that Windows cannot start because it cannot find the boot device.

  Help, please?

  This is not a mechanism supported by Apple to change the size of the Windows partition. Apple supports the remove/reinstall only.

  We try to remedy. Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  What is the model/year of the MBA? Please, do not post the serial number of your Mac. Orders 'sudo' will ask for your password.

• bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India

  Hello Sir,

  I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the difference what I unbox my 6plus in indai, I unbox my 7plus in qatar and I put the sim card of sri lanka first and tried to India sim then and facetime disappear from the home screen. at the point where I insert my card sim of qatar is worrking. Please I need help. If I buy another piece of 7plus and bring it in sri lanka or India my facetime work? or what? I'm totally confused plese answer me as fast as you can

  FaceTime is forbidden by the law in Saudi Arabia and the UNITED Arab Emirates and is removed from iPhones sold in other countries of the Middle East, if they are used outside the country where they were originally sold. If you plan to use an iPhone outside the Middle East, then don't buy it in the Middle East. The one you bought there FaceTime was illegally imported from another region and sold it.

• Why do I get a message saying that my computer is not registered for me

  I show the icon of the application that will not download because I get a message that says my computer it is not mine or is not saved for me.  WHY!

  What is the EXACT message you get?

• iPhone is disabled and ask for password for restore and backup

  my iphone screen is showing that the iphone is disabled and asking the password for restore

  I tried several times but each time the process, says need to access code for iphone restore

  pls advise.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I tried to download macOS Sierra for the last hours on my Mac, but it is still holding still to download. Should I download the El Capitan instead? All sites tell me that I should update my Safari.

  I tried to download macOS Sierra on my macbook pro iOS 10 for a few hours and it still has several hours to go. Should I just download the Capitan instead? All sites tell me that I should update my Safari or I wouldn't even through this disorder.

  You must complete the download of Sierra. It is a very large file and will take some time, especially on a slow Internet connection.

  (145165)

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.