Widget menu overlap after update

Similar Questions

• Cc Adobe is no longer in the menu bar after updating mac os el capitan

  I can still access my account... but the 'node' adobe icon disappeared from my menu bar higher after update from adobe.

  I use Mac OS El Capitan

  Thank you

  Hello

  Please see icon no. creative cloud in my main menu bar (iOS)?

  Re: Missing creative cloud of my Mac menu bar icon.

  Icon creative cloud missing in my Mac menu bar!

  I hope this helps!

• Disable the update of the widget menu when you are working with files from Muse?

  First of all thank you Adobe for the creation of Muse - I really like it a lot!

  My question:

  When I work on my site with over 250 pages, he strains the performance to make even the smallest changes in the structure of the page. I work with two masters of every much the same horizontal menu widget.

  Add, remove, and reorganization of pages makes the PC (Windows 7 laptop to some but not impressive power) to stop and take a deep breathe for a few seconds. It really interrupts the workflow.

  A raw work around this is to remove the menu widget in the two masters and put it in a new master page that contains the copied menu only two other masters and keep the rest of the header in place on the masters originals to be used for the alignment on the pages. In this way, what a page is updated when you work with adding, deleting, and the reorganization of pages.

  I tried to find a preference disable the update of the widget Menu when working on the structure of the page and just allow the update again when the work is done? is - it? otherwise I would recommend it highly :-) Since my work is about a little difficult/risky to use after the publication of ;-)

  Again, thank you very much for this beautiful program. Being a user of CS (now CCC) selftought I like the ease of control of the Web design you can get with Muse (to the distribution unit other features of course - if you ever wanted to add some sort of database search feature it would be MUCH appreciated.) A workaround is to use the iframe and an external search/lookup page, which returns results with links to parent pages. Un_peu funny good construction :-) ).

  BR

  Mr. harder

  Glad to know you like Muse.

  It can be very intensive CPU if you have several Master pages with their own menu widget Pages. Take a look at the following threads and refer to the response of Zak.

  http://forums.Adobe.com/thread/1423767

  http://forums.Adobe.com/message/6166722

  See if you are able to use one menu widget for all Pages in your site while enjoying the function hierarchical master page.

  http://TV.Adobe.com/watch/Muse-feature-tour/Adobe-Muse-hierarchical-master-pages/

  We know the performance problems caused by the widget Menu (all types of pages) and is something being considered by engineering in one of the upcoming releases.

  Thank you

  Vinayak

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• After Update February 2013, removing the last picture of Adobe on the slideshow widget standard?

  After Update February 2013, I can't delete the last picture from Adobe on the slideshow widget standard more? Anyone has any idea how?

  I think you are referring to the third stock photo in a slideshow of base that you are unable to delete since the upgrade to 4.0?

  If this is the case, try to browse to the image by clicking on the ">" (next) link mode creation; Select the image of hero and press DELETE to remove completely the third remove the slide show. You can also double-click the hero image to select the particular picture and press DELETE that would make the third blank slide and you should be able to place a new image.

  If the above does not help, try reseating the basic slideshow widget or use the blank slide show which does not contain images of the reserve.

  Thank you

  Vinayak

• HI, Siri would not speak in Italian Luca voice after update for Sierra

  HI, why Siri not talk in Italian Luca voice after update to Sierra?

  Open  (Apple menu) > System Preferences > accessibility > speech.

  Next to the system voice menu, select Customize...

  Scroll down to Italian, and then select Luca, and then click OK.

  It will take a few moments to download the new voice.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Some problems of AppStore after update of the Sierra

  Hi, after update my Mac to Sierra, there are a few problems of the AppStore:

  1. The Pages app updated to v6 and numbers to v4, Keynote, but fails to Update v5 (iWork ' 09)
  2. I've been on the program of public beta for Sierra but have now updated to the release version, but the app store is still trying to download the last Beta of Sierra. I disconnected (e) into the beta program website
  3. The AppStore download iPhoto but the app shows the icon of the incompatible (white circle with bar diagonally) in the Application folder - how to uninstall it?
  4. Is does not work available on the AppStore - the previous Terminal command Debug menu for access to this

  Thank you

  Hello

  Safe Mode boot removes the system caches that can you help an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• My Macbook Pro does'nt connect after update to 10.11.6

  Hi all.

  After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

  An advise, please.

  Kind regards

  Fabio

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• After update to Firefox 32.0.3 print dialog box will not apear in Win7Pro/XP after awhile, but a restart of Firefox will allow him to appear again...

  After update automatically to 32.0.3 Thursday last Monday on the computers of all of our employees and boss both Win7 pro and XP pro, we saw Firefox sessions that will not bring the print dialog box. The print preview dialog box will return but no button print or print menu to display the print dialog box. After you close Firefox and reopen the print dialog box works again for some time. Web sites that use boss and staff during a session are different and appear to be the cause. Firefox settings are at fault because simply restart of Firefox just solves the problem and no other web browsers or application has any problem with the display of the dialog box print at any time. Again, that has started on all computers as soon as 32.0.3 was automatically installed during the night.

  Thanks Guigs2,

  Our users done restaring Firefox so I couldn't get this info.
  Now, it seems that the issue may have been corrected in v33.

• not strong enough after updating iTunes

  Hello

  After updating iTunes yesterday, itunes is not as strong as before; of course, I changed volume in the menu bar as well as in volume ('her') maximum system configuration. If I use VLC, the volume is OK; Therefore, I don't think it's a problem of speakers of the Mac and iTunes.

  Thank you very much for your help

  Haperic

  Hello Haperic!

  From what you have posted, the sound after update of Mac is not as strong through iTunes but is fine using VLC or other applications. We certainly have to check a few things with the volume.

  If you haven't done so already, we'll leave iTunes in the menu next to the  iTunes when iTunes is active. Then quit iTunes.  Or command + Q on the keyboard.  Open later and try to play a few things after.

  No change after that, then go ahead and restart the Mac and try again, please.

  If it's still the same after the restart, then we'll reset the NVRAM/PRAM memory.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM

  1. Stop your Mac.
  2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
  5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
  6. Release the keys.

  After resetting the NVRAM, you may need to reconfigure the parameters of the speaker volume, screen resolution, selection of boot disk and zone information.

  I hope this helps.  See you soon!

• I can not adjust the size of the window for Firefox on OSX 20 after update

  After updating to the latest version of FF, I can no longer adjust the size of the window. I tried to click and drag the four corners of the window, but it remains the same size. Before the update I could adjust the size of the window. I tried rooting around in the topic: configuration settings but have not been able to find something that would determine the size of the window being locked to certain dimensions. I have also reset firefox to its default settings and this does not resolve the issue.

  Execution of OS x 10.6.8 with Firefox 20.0

  Try to disable the use of Firefox graphics acceleration hardware.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Firefox menu > Preferences > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, the problem is solved?

  See also: starting today, Firefox windows is more scaleable. OS x 10.6.8 Firefox 20.0

• AC100 sees the built in 3G modem after update to kernel 2.2

  Hello everyone!

  Does anyone have a solution for this problem?

  I got the AC100-10V for a few months and everything worked fine until I updated via station served Android 2.2.
  Now there's * no sign * 3G construction no modem in the system. * I can t he use anymore.*
  * All entries in the menu about this feature and also the icon for mobile networks have disappeared! *

  What can I do to get it working again?

  Please help me!

  There is no problem with my AC100-10V after update - 3 G works as expected.
  Have you tried to reset the device? (Reset)
  Consider finding a Toshiba service and bring it back under warranty.

• bookmarks bar is empty after updating to firefox 5

  After updating to firefox 5.

  Favorites bar is empty (that is, it shows no bookmarks).

  I CAN access the bookmarks by clicking Show all bookmarks.

  Make sure you always have the "Bookmarks Toolbar items" on the personal bar

  If the menu bar is hidden, then press F10, or press and hold the ALT key, which should make the "menu bar" appear

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Check in "view > toolbars > customize" "Bookmarks Toolbar items" are on the personal bar
  • If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the toolbar palette in the window the bookmarks toolbar Customize
  • If you do not see the "Bookmarks Toolbar items" or other items which do not appear in the palette of the toolbar or a toolbar, then click on the button "Restore Default Set"