widgets and accounts were gone after safe mode

Similar Questions

• Why both firefox and thunderbird to start in safe mode?

  Turned on my computer, run firefox and thunderbird as I always do, and they both started in safe mode. They both showed a box before opening it, who said that they are running in safe mode. Why would they do that?

  Hello, safe mode is when you press the SHIFT key during launch. Maybe you might have to look more closely at your keyboard if some of the keys are stuck our rates or try with a different material...

• Phone constantly optimize the applications and does not start in safe mode.

  Hello, I restarted my phone yesterday morning and it has been "Optimizing apps" since then, I have no access to a pc that I work away from home, I reset hard it loads of times and tried to start in safe mode by using low volume and power (it does not restart the phone the sony screen over and over) is here something I can do to get the z3 works again? Any help is appreciated!

  @Mav0095

  You will need a computer to use the CCP or bridge

  PC Companion (CCP)

  Bridge (for Mac)

  Xperia Companion (XC)

  Software repair Guide

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• Screen won't turn on and can run Vista in safe mode on Satellite P series

  Last night, I was working on a slide show with windows movie maker in Vista. I had trouble getting the software to recognize my video files for my camcorder, so I suggested that I try to download codec so that he could play my files... I don't know what I was doing, but he gave a shot.

  Even if the codec didn't work even after the download, I was still able to run my computer normally. This morning I woke up and continued to work on my slide show but my computer wouldn't play my slideshow. All he would do was play music and audio files... Everything seems to be working so I decided to restart it.

  My computer will restart, but now my screen is black. It remains 'functions' I see change different colors of black and gray because it is set to zero... and I can hear all the audio that comes with reset, but I can't get my laptop screen to work.

  I plugged my desktop monitor to my laptop to see if the monitor would work like that and it did for about 30 seconds, then turned off Black too. I then rebooted and press F8 and ran in safe mode with my always-connected desktop monitor. I am able to run in safe mode but not normally reboot. I think I downloaded some viruses with this codec.

  I decided to get the desktop monitor and press F8 just hoping the screen would show up on my laptop... but it still doesn't work. It stays black.

  Now, I'm running in network mode so I can know what to do next. I tried a restore of the system in safe mode, but I think that it only deleted windows updates and not something else. I can't find my toshiba recovery CD because we moved a month ago and it's somewhere in a box...

  So here I am. I work constantly on a slide show for Christmas and can't play or it end before my laptop works again. I also tried a during restart System Restore but I don't know my password of administrator and I tried a couple that I thought that I would have used during installation, but they were not good and so now he me off to run as administrator.

  Can someone tell me what I can do? Thank you very much

  I'm a newbie here, but have you tried...

  1. press F8 (press on and hold, or press repeatedly) while Vista boots, and then select Safe Mode. This should automatically open the account administrator (no password needed) and you can then reset your existing account to the administrator.

  2. simply delete all user accounts permits (including the one you are logged as) without forgetting to let the disabled administrator account. And then disconnect.

  3. use Offline NT Password & Registry Editor to unlock the administrator account or promote another user to the local Administrators group to regain access to your locked Windows Vista PC.

  4. also Vista has a hidden superuser account.

  Just my 2 cents.

  Post edited by: Mddlrthr2

• Can only connect to the account of user in safe mode, what do I do?

  There are two accounts on my profile. I can connect fine, but the other (the most important) will not let me connect unless the computer is in safe mode. If I try to log in it says: "Please wait", before you redirect me to the previous login screen. I tried to copy all my info on a new account, but the music folder will not copy without permissions, and I found that a lot of my installed programs also are not copy correctly. What are my options? Everything can I? All this seems to occur after you install an update to Windows Vista. I'm running Vista 64, btw.

  Suggestion:
  You said... but on the other (the most important) will not let me connect unless the computer is in safe mode.

  So go in safe mode > login to this account admin (the most important) > and do a system > choose a date where you did NOT have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, click
  > Next > finish
  To sit and wait. The machine restarts when it's done.

  If the system restore is not enough, you need to create another account administrator in safe mode.
  Treat the former admin count as damaged account.
  Here's how to deal with a corrupted user profile (account):
  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

  Note: You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

• El Capitan memory use increases AFTER safe mode

  Can't quite understand it.

  In OS X 10.11.1: After starting in safe mode, then restart after that, App memory continuously increases.

  Before the safe mode:

  The App memory: 521,2 MB

  Wired memory: 470,3 MB

  Then,

  Start in safe mode, all reboots of performance:

  Memory of the App: 2.67 GB

  Wired memory: 525,1 MB

  In addition, in the observer activity, looks like all processes jumped upwards of 10 MBs, which could explain memory App to go up, but I still cannot understand why.

  Incase anyone is wondering, I was able to restore 10.11.1 boot minimum memory usage by using:

  sudo update_dyld_shared_cache-force

  I'm not an expert here, and I DON'T recommend do you it yourself.  If you have a machine with more RAM you need, this could actually help not at all, especially if your boot drive is NOT on an SSD.

  Means the most sure to solve the problem, if you still think it is a problem, is to reinstall from recovery of the Internet.

• Help! I deleted all MyRIO software and it is stuck in safe mode

  Hello

  In the NI MAX interface, I saw that there was a new version of the software to intall, in the section where it is possible to add and remove items from software to MyRIO among a list with checkboxes. The last option in this list was something like all erase, remove all software or other similar texts.

  I did intend to install the new version of the software after that. Then the MyRIO restarted in safemode, whith the led blinks three or four times every 5 seconds. And it was never recognized by the computer.

  I tried the button to reset without success. The MyRIO is still stuck in safe mode.

  Then I tried to communicate using the serial port on my computer set up according to the Guide to MyRIO, fitting RX, TX and GND of the connector on the PC in the ports of the UART of the connector has MXP. But the MAX NOR see the MyRIO, there is no response to the serial communication.

  How can I install the software again in MyRIO?

  Thanks in advance.

  Kind regards

  Rodrigo.

  Hello

  Today, I managed to communicate with MyRIO and now its working again.

  The RS232<->UART using the MAX232 IC worked, but I couldn't install the software in MyRIO via this interface.

  Without doubt, I uninstalled the software OR associated with MyRIO from my host, because when I plugged the MyRIO using the USB interface for my other computer, he acknowledged, and I installed the software into it without problem.

  Kind regards

  Rodrigo.

• Restart normal is weird after safe mode.

  I've used Safe Mode and then when I rebooted normally connect to my account fine, then once on my account that the windows vista doesn't seem to work properly, the taskbar was different from a taskbar in vista and I can not connect to the internet. Also my system reboot is a problem too. Any ideas how to have things back to normal?

  Hello

  See if that helps you.

  Do a system restore, if necessary using the safe, before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• Firefox continues to go from full screen to the small screen, every minute! I tried to reset to original settings and tried to go into safe mode, and the screen keeps minimizing. Very difficult to work in the window when it is a quarter of the size of my

  At first I thought that maybe I'd hit something, but then I just sat there for a minute (literally) and didn't touch a thing and he always downplayed. I have several tabs open up working on the different classes.

  Try:

  • http://KB.mozillazine.org/Prevent_websites_from_disabling_new_window_features
  • http://KB.mozillazine.org/JavaScript#Advanced_JavaScript_settings

  See also:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Mouse and keyboard only work in safe mode... why?

  Or work on restoring normal operation and all the images are blurred. Said one-stop two players work under ms - back! Someone help me?

  If it works in safe mode it looks like it's the drivers. because in safe mode, it uses only basic MICROSOFT DRIVERS... go in safe mode, go to the DEVICE MANAGER (right click on computer and click on MANAGE then click on allow or continue if prompted, and then click Device Manager).

  under the heading of the keyboard device, click on the '+' and then right click and uninstall all THE items in the CATEGORY of the KEYBOARD and click OK on all messages

  then

  under mouse/mice and other input devices , click on the '+' and then right click and uninstall all THE items in the CATEGORY of the mouse/mice and other input devices and click OK on all messages.

  Then

  Reboot and allow devices to relocate

• HP SlimDesktop 450-a114: keyboard and mouse only work in safe mode

  When that I starts normally, the keyboard and the mouse do not work and I can not connect.

  If I boot in safe mode, the mouse and keyboard and I can open a session.

  In safe mode, when I go into Device Manager, the device of keyboards is "HID Keyboard Device" and the mouse device is "mouse HID-compliant".  What should I do?

  Thank you

  Mike

  If it works in Mode safe is probably a driver issue because Safe Mode doesn't load any third-party drivers.

  I suggest that you go into Device Manager"and uninstall the keyboard and the mouse. To restart Windows will detect the keyboard and mouse and reinstall the drivers, I hope as fixing the problem.

  * You didn't say what version of Windows you use, so I could not be more specific on how to access the Device Manager.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Windows XP 07 login I get the black and white screen where is safe mode option and then just loop it back to the same screen.

  When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions?

  Hi RudyNY,

  1. you have Windows 7 or Windows XP installed on the computer?

  2. you receive an error during the process of loop?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration.

  http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• the computer restarts on startup and then only works in safe mode

  I'm running out of options.

  I have a MSI all in one pc which runs on windows vista Basic. I turn on my computer and it will show my lock screen, but just before I can type my password, it restarts itself and give me different options of safe mode. I tried a lot of different solutions, but none of them seem to work. Can anyone help me, please.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you already know)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Internet refused after safe mode Vista-access

  For some unknown reason, my Vista system when I turned it on went safe mode of ti, I finally return to the window icon windows but could not sign on the internet, just kept circling, blue invivoked even a non-secure wireless signal still turn? -This is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:don't forget

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        You are able to use Internet Explorer in normal mode?

  In safe mode, only the basic drivers and features are loaded so surfing the Internet does not work in SafeMode instead you can try in safe mode with networking that allows you to boot into safe mode and offers also the possibility to browse the Internet.

  To start in safe mode with network follow the same procedure that you follow to start in safe mode (button press F8 to start the system and boot advanced option to the list of Advanced Options Select Mode safe mode with networking.)

  You can also visit the link provided below for more information about advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows loading in black and white, when running in safe mode with network it runs in color, how can I solve this?

  When I load windows it runs only in black and white, I tried to start in safe mode with network and it runs in color, can you tell me how to solve this problem?

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner