WiFi adapter did not find any connections

Similar Questions

• Setup did not find any hard disk installed

  I'm trying to re-start Windows XP on a disk (file missing or corrupt ntoskrnl.exe). Whenever I press the 'R' to repair key I get this error message:

  Setup did not find any hard drives installed in your computer. Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running. Setup cannot continue. To quit Setup, press F3

  Someone at - it ideas?

  Hello

  It is perhaps that the hard drive is not connected properly. Make a person qualified to check the connections of the hard drive to make sure they are solid, you need to maybe disconnect and reconnect both ends of the cable.

  I suggest you return the article mentioned below to learn how to fix ntoskrnl.exe.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I just installed Windows 7 on a PC that I just built. Being new to Windows 7 I started to play around him and did not find any games at all. Does anyone know how to fix this?

  I just installed Windows 7 on a PC that I just built.  Being new to Windows 7 I started to play around him and did not find any games at all.  Does anyone know how to fix this?

  Salvation Ita; tribal

  Congratulations on a newly built Windows 7 computer. Selected games may not be that is the reason why you are unable to find all the games on the computer.

  Follow the steps to turn on the games feature.

  1. click on start.
  2. type optionalfeatures.exe in start search.
  3. place a checkmark for the games.
  4. click on OK.

  After the computer has been restarted, check if you can play games on your computer.

  See the article: features on or off Windows activate: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers Feedback Forum and tell us what you think.
  

• Install XP: Setup did not find any hard disk installed

  I have this old computer. When I try to install Windows Xp, it says that Setup did not find any hard disk. I have readers of diskette and cd on the computer. A source told me that I need a SATA RAID driver until I do.

  Windows XP
  AMIBIOS
  MSI

  Correct, you will need to download the appropriate TXTmode drivers and put them on a floppy disk. If you have a MSI motherboard in your system, you will get these drivers from MSI.

  It would be also possible to get Windows to load with a change in your BIOS settings, but I recommend that get you the correct drivers.

• Setup did not find any hard drives installed in my computer

  HI -.

  I own a laptop Presario X1015US and recently bought a new hard drive for her (Western Digital Scorpio Blue PATA 160 GB) but when I insert the operating system CD it goes through the entire process until it gets to a page where it says:

  Family Windows XP Setup

  
  

  Setup did not find any hard drives installed in your computer.

  
  

  Make sure that the hard disks are turned on and properly connectd to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running.

  
  

  Setup cannot continue.  To quit Setup, press F3.

  I'm not sure of what I am doing wrong and hope someone can help me.  For example -.

  -J' checked the Bios and I do not see where the drive sits - have I missed something?

  -The drive I bought compatible for this model - electronic Fry told me that it is.

  Thank you

  Charles

  If the bios does not see it, installing XP will ever either.

  Some older laptops have a problem with the largest hard disks (more), I return the drive and see if they have a 120 GB model.

  Can also be that you just got a bad.

• On Firefox 14.0.1 cannot see all the photos on Facebook, did not find any blockage in defenitions

  Since the last update of firefox, I think, I don't see any picture on facebook.
  I have seen no sites blocked on tools > contetnt > download images or
  the button in the address bar of the site > more information

  Hi guys,.
  Well problem was solved: Apperantly settings of the account in Facebook itself has been set on safe navigation. It was like that for months... I did not what has happened in the last few days, but after this everything worked...
  Thank you for your efforts!

• Setup did not find any hard drives installed on your computer.

  Make sure that the hard drives are powered on and well connegted to your computer. And that any hardware configuration of the drives is correct. This may involve running a program diagnosis provided by the manufacturer. How do the hard disk driver. so I can see if everything right?

  You will get the driver from the website of the manufacturer of the hard drive.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WiFi adapter does not work correctly

  I want HP 4-1204TX with Windows 8 operating system and I always had the same problem with the connection using my wifi adapter. When I opened the Device Manager to search for the status of the wifi card, it says my "ralink RT3290 802.11bgn"... ". "Microsoft Wi - Fi Direct virtual adapter"... everything has the same error code which is Code 45.

  How can I solve this problem?

  Hi @FLFOO ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in the Device Manager in Windows 8.1 could be fixed by removing any additional drivers. So I want to uninstall everything that is listed in the network drivers in Device Manager, reboot the laptop. Here is a list of the options in the Device Manager, it might help.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that requires an upgrade or reinstall.

  I hope this helps.

  Thank you.

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows did not find antivirus software on this computer

  Installed WindowsDefender and Action Center said "windows did not find antivirus software on this computer.

  It is to be expected.  Windows Defender is an anti-malware program that is designed to protect you against spy-ware, and ad-ware only.  However, there is no capacity for the anti-viral.  You should always install an antivirus application any.

  There are several free antiviruss protection applications.  And here are two:

  AVAST! Home Edition

  http://www.avast.com/eng/avast_4_home.html

  Microsoft Security Essentials

  http://www.Microsoft.com/security_essentials/

• RV180W [IKE] ERROR: did not find configuration for

  I have 1 or 2 of these messages per week.

  Fri Sep 11 15:14:30 2015 (GMT + 0000): [*] [IKE] ERROR: did not find configuration for 85.25.43.94 [60105]

  I have not any clients VPN active so do not know why I get these other than intrusions attempts.

  Hello

  You have tunnels VPN site-to-site configured in the router?

  .:|:.:|:. CISCO | Russ Wyatt | Network engineer | Cisco technical support | [email protected] / * /

• Did not find the main: PluraRunner. Program ends.

  Hello..

  I use Windows 7 (64-bit). The problem is that I have a prompt with the error "did not find the main: PluraRunner.» Program will exit. "Here's a screenshot of the error:

  

  -By clicking on OK the prompt again in about 20 seconds. It never stops.

  I tried:

  -Restart and re-login
  -Uninstall and reinstall Java
  -Remove any redundant Java installation. So for the moment I only have a single installation of Java on my machine.
  -Defining the path and Classpath variables

  Whenever the prompt, I see files two following jar in the temporary location:

  

  If I click OK to the prompt and delete these files, they are re-created in the same place when the guest returns.

  Please me before I lose my sanity on this stupid problem!

  -Mitesh

  Solved!

  I was able to resolve the problem by disabling one of the start-up services in msconfig:

  

  Some people may find the same as that in their list of others, but the key has been one of the start-up services which kept causing the error message. I even rebooted my machine and made sure that the error does not return.

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.

• error adpreclone.pl: RC-20010: Fatal: did not find version of Info-ZIP zip 2.3

  At ran adpreclone.pl on 12.1.3/11.2.0/Linux and got after errors:

  -----

  PWD: /ap21/TEST/db/tech_st/11.2.0.4/appsutil/log/TEST_tedevlx01

  RC-20010: Fatal: did not find version of Info-ZIP zip 2.3

  in the path. Please make sure you have version 2.3 in zip

  your path and restart the command.zip 2.3 is normally

  available in $ORACLE_HOME/bin/or it can be downloaded

  de http://www.info-zip.org/zip.html

  -------

  There are multiple instances running on the same box that only this instance has this problem.

  # rpm - qa zip

  zip - 2.31 - 2.el5

  $which zip

  / usr/bin/zip

  $cd $ORACLE_HOME/bin

  $zip

  Copyright (C) 1990-2005 Info-ZIP

  Type "zip"-L ""' for the software license.

  Closure with zip 2.31 (March 8, 2005). Use:

  I checked another case where adpreclone doesnot have problem, the zip version is 2.31.

  I copied the file $ ORACLE_HOME/bin/postal code $ from an instance of good (meaning no error for adpreclone) from here and still got the same error.

  Thank you and best regards

  Can you please make a backup of zip under $ORACLE_HOME/bin and copy since/usr/bin and try again?

  If you always hit the same question, then please connect a SR.

  Thank you

  Hussein