WiFi calling is not available using 5 c with AT & T

Similar Questions

• Not available trying to make with GPU CUDA

  I have a Samsung series 7 Chronos 17 "laptop running Windows 7. It has a graphics card than Nvidia Optimus 650 m. All my drivers and software are up to date.

  I try to get CUDA working in after effects CC so I can use the GPU rendering, but when I try, After Effects does not see, so I can't use the GPU rendering.   According to the information provided by Nvidia, I should be able to use CUDA.

  In a brief search on Google, I saw a post by a guy when put his laptop (same as mine) to the test couldn't use CUDA. It has been disabled or unavailable or something, but I have not found a solution. Someone has an idea of what could happen?  Is this really not supported device?

  Here is the info of the AE.

  Fast draft:	Available
  Texture memory:	1616.00 MB
  Ray-tracing:	CENTRAL PROCESSING UNIT

  (Not available - incompatible device GPU or the display driver)

  OpenGL

  Seller:	NVIDIA Corporation
  Feature:	GeForce GT 650 M/PCIe/SSE2
  Version:	2.1.2
  Total memory:	3.94 GB
  Shader Model:	4.0 or later

  CUDA

  Driver version:	-
  Features:	-
  Current usable memory:	-
  Maximum usable memory:	-

  Thank you!

  In after effects CC (12.1), which we will publish soon, the GT 650 M is added to the list of maps that After Effects uses on Windows to the GPU of the 3D rendering engine acceleration traced to the RADIUS.

  http://Adobe.LY/AE_CC_12dot1_GPU

• Not available in 2 Air with IOS 9.2.1 FaceTime iPad

  IOS9.2.1 FaceTime is not available on my iPad Air2. If anyone can help.

  What is the model number of your iPad? Settings > general > about > model.

  You may need to scroll to see the entry for the model.

• chat or call option not available in help

  I use bike g 2nd GEN software upgraded to lolipop 5.0.2

  I do not chat or call option in the Help menu on my phone.

  Where did you see that these listed options you would expect to see on your phone?

• How to extend a WiFi router network not Apple using Airport Extreme and Express?

  My cable ISP company just gave me a new modem/router - a DG of Arris - 2470. For the last two years I used a cable modem independent older with a connected Airport Extreme (both located on the ground floor) and an Airport Express station on the floor as an Extender. I was very happy with the power of the signal around the House.

  Since his arrival to the Arris router my signal has become very low to the floor. I would use my two Apple devices to extend/boost my network, but do not know how to do this.

  Thank you!

  Basically, you have two options:

  1. (Best overall performance of the network) Connect the extreme and Express on the Arris Ethernet gateway device and configure all for a traveling-type network. This would require an Ethernet connection between all routers that can be accomplished by either using Ethernet cable or the use of mains adapters.
  2. (The overall performance of the adequate network) Simply connect the extreme to the Arris Ethernet, then extend the extreme using the Express.

  Which of these do you prefer?

• HP Compaq 15-s008Tu: WiFi and Bluetooth not available for HP Compaq 15-s008Tu for Windows 7 64 bit drivers

  Hello

  I'm not able to find drivers for WifI & Bluetooth on the portal of support for HP Compaq 15 - s008Tu for Windows 7 (64-bit). Please help me with these drivers.

  Thanks in advance a ton!

  Hello:

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-131223-1 & cc = us & dlc = en & lc = fr...

  Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-137961-1 & cc = us & dlc = en & lc = fr...

• When I print a html to PDF, it displays an error called "SegoeUISymbol not found, using mail.", may I ask how to solve?

  The error message:

  %% [ProductName: Distiller] %.

  %% [Page: 1] %.

  SegoeUISymbol not found, by using the messaging service.

  %% [Error: invalidfont;] [OffendingCommand: show] %.

  Battery:

  ()

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  The problem is probably due to the printer driver options set by default for the printer PostScript of PDF from Adobe driver instance.

  To resolve this issue, quit programs and go to the Adobe PDF printer Properties . On the Advanced tab, press the button default printing . Select the Adobe PDF settings Look for option rely on system fonts only . Uncheck this option. Then press OK. Select the general tab, and then press the button Preferences . Still once, select the Adobe PDF settings Look for option rely on system fonts only . Uncheck this option if it is not already unchecked. Then press OK and click OK again.

  This should fix the problem. Please report back with your results.

  -Dov

• Model and options not available using VMware Infrastructure Client of cloning

  Hello, yesterday I posted in the wrong place. The administrator sets and I got a resolution of a few posters. Thank you. I have ESX 3.5 stable running on my HP Server. I also managed to install a virtual machine to Windows 2003 server and installed the VMware tools on this instance. I am so very happy. I added a second virtual machine and instead of executing Setup from a CD, I wanted to work with a model or a clone. While using the client VMWare says that I should be able to clone a virtual machine, or make a model, I don't have the option. In reading, it seems that I need Virtual Server Client. Is this correct? I'm downloading the client I think, but also wondered if this client has been designed to replace my VMWare Client on my workstation? It runs on windows XP? Or I have to build another server? My hat is off all who were able to become experts. Although the idea sounds simple enough, trying to get my head around it proved to be one of the most difficult software that I had to learn on my own. Thanks in advance for any help or pointers. Regards, Mark

  models and cloning are characteristic of vCenter.  It is a separate download, but also the price.  You will use the VIC to access your vCenter server.  The vCenter Server would be hosted on a Windows operating system.

  You can download an evaluation version which is good for 60 days.

  https://www.VMware.com/tryvmware/?p=VI3&LP=1

  Hope this helps

• Can not listen using bluetooth headphones with music Apple after updating iOS 10

  I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

  Any suggestions or help would be greatly appreciated.

  Hi the edema,

  It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

  As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

  Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
  6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

  Thanks for stopping by Apple Support communities. See you soon.

• Adobe Bridge CS6 not available as an open with option to windows 7 pro.

  Is from CS4 master collection to CS6 - now I can't open the image in a folder full of images in adobe Bridge.

  It does not show in the default program options-, or other options. I walked to the bridge to add it, but it does not appear after you click Ok

  gratefull for help

  [Moved from comments]

  Contact adobe support because the problem is with adobe CS6

• Arrows turn on Skype logo, all contacts show unavailable, IM is available, calls are not

  Hello! I use Skype 7.18.66.103 on Windows 7 x 64. From 11 January 2016 he behaves badly - arrows turn on Skype logo, all contacts are shown to be unavailable, but can I do IM with them. Calls are not available. I have reinstalled it several times with profile user, registry cleaning and removal of Skype tool. I tried to change the connection settings. IE11 connection settings. Windows Firewall settings. Unfortunately, nothing helps. Please, help to return my Skype to stabilize the condition. Thanks in advance.

  After discussing with the help of Skype we downgraded in 7.18.0.109 and it works great so far

• P036TX Ralink Wireless is not available

  Dear users. I just bought a new HP laptop p036TX, but I can't get wifi to work. I installed all the drivers and updates available to your Web site for this product, but the wifi connection is not available. It is not even appear in the network manager or to the manage devices under network adapters, the only network that is Realtek PCI. So I can connect through the ethernet cable and use internet but I can not use wifi, can't even see my wifi device. Not sure if I need to activate the wifi somehow because on my keyboard it has no wifi icon at all. I checked the manual and there is no mention about wifi key. The F12 key, there is only the airplane mode which does not work, if I press it separately or with the FN, he does nothing. Other FN keys work well and I reinstalled the driver of QUcikButton as well.
  So my question is: How can I activate wifi {assuming that there is a key for activation of it} or what driver should I install so I can even see the network wifi device? Please help I'm desperate groing

  Troubleshooting steps: I tried to install several drivers from the Ralink site and 802. 11B drivers which is suppose to be the wifi device I have on this machine. Also tried several reboots laptop. I also tried searching google and went through a lot of topics here, but never found same problem or a solution to my problem. Would be grateful for any advice, thanks.

  I don't know exactly what card ralink I have because I do not see in the devices

  This problem has been resolved here

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/problem-in-finding-wireless-LAN-driver/m-p/4597202

  Thank you!!!

• Google maps view 3D not available with Safari 9.0.3

  I realized that the 3D view of google maps is not available using Safari (9.0.3) using the google chrome browser that this option is there and working. (I'm on iMac 21.5 "2012 with OS X El Capitan) Thanks for the help

  It has been like this since at least 8 Safari. It's that something ordered by Google. Safari displays the compass if you change the user agent for Chrome or Firefox.

  If you want to see the 3D option, go to Safari-> Preferences-> advanced and enable the option "see her develop menu in the menu bar. Then go into the menu to point and select "Google Chrome" or "Firefox".

  

• In trying to e-mail a picture in Windows Photo Gallery, I get this error: not available addresses or Windows Mail is not available.

  Trying to email a photo from the Gallery of photos that has been analyzed and get error msgs re: addresses http not available or not available using Vista Windows mail. Sure system for Windows Live Mail as summer send and receive e-mails from the change. The printer does not know Windows Live Mail? How can I send a picture? Am using HP OfficeJet 4500 and desktop computer, if that helps.

  thanx, Sylvia

  original title: Lost trying to e-mail scanned photo

  If you manage your emails with Windows Live Mail... maybe you need
  to set up Windows Live Mail as your default e-mail client.

  See the following links:

  Windows Vista - change the default e-mail program
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-default-e-mail-program

  Windows Vista - configuration of the default mail Client
  http://freeemailtutorials.com/microsoftWindows/setDefaultEmailClientOnWindowsVista.CWD

  How to restore or remove Windows Mail of default programs
  http://www.Vistax64.com/tutorials/186933-Windows-Mail-restore-remove-default-programs.html Windows Vista - Make Windows Live Mail Windows default email program
  http://www.freeemailtutorials.com/windowsLiveMail/optionsAndSettings/setAsDefaultEmailProgramOnWindows.htm

  Also... you could open a new e-mail Message in Windows Live Mail and
  attach the picture to the message.

  And... what happens if you go to your pictures folder and find the photo in
  question... then make a right click of the photo thumbnail or file name and
  the menu... Choose... Send to / recipient.

  FWIW... If the photo was scanned and saved in your photos
  file the printer would not be involved.

• Microsoft Hosted network is not available (CF00100E)

  Whenever I try to start a network hosted, I get an error message like "Microsoft Hosted network is not available". Any problem with my network card. I am currently working on Windows 8 operating system. Is it possible to solve?

  Hi Rithu,

  Try these steps and check:

  a. press the Windows key + R , type Devmgmt.msc to open Device Manager.

  b. click view and press on ' see the hidden devices.

  c. go down the list of devices and expand the "network devices".

  d. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  e. Select activate

  f. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  g. after that, the connection should be displayed.