WiFi does not stop

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• WiFI does not work on Satellite M105-S1021

  My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again.

  WiFi does not work on this laptop, even with the switch at the front, running and when I put in a USB WiFI module with an external antenna I get a very bad signal from my router wireless in the next room< 20="" feet="">

  Hello

  I found the specification for this old Satellite M105 series data sheet:
  [Satellite M105-S1021 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1372978& rpn = PSMA2U & modelFilter = M105-S1021 & SelCategorie = 2756709 & selFamily = 1073768663]

  Looks like the laptop was equipped with a map of Atheros 802.11 wireless network b/g.
  If your internal wireless network card does not, even if you have enabled the external WLan switch, then I recommend check device manager first check that the area of Wlan Card network adapters usually map Atheros Wlan must be there if its not listed, install the Atheros Wlan driver

  In addition, next to the switch hardware Wlan, you need to activate the WLan using Fn + F8

  Regarding the USB dongle and a weak signal of Wlan:
  Well, maybe the USB dongle aerial signal is too low on the other hand you should test connectivity using 802.11 B or 802.11 G standard only

• Debugger does not stop at breakpoints

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• Debugger does not stop at breakpoints for some applications

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• BlackBerry smartphone WiFi does not work most of the time

  It's like a broken record, I know, but my WiFi does not (most of the time).  It used to work well, but over time he works less and less! I use v5.0.0.979 (bundle 1607, the 5.1.0.177 platform and a Bold 9700)  I get the Green checkmarks for connections and WiFi and a white WiFi icon options.  If I try to use the browser of BalckBerry he started working in WiFi and I can see the blue WiFi on my router shows the data flow and then everything stops in for WiFi is concerned and after a period of time, it either expires or most likely to connect to the 3G network.  I used to (a 3 or 4 months) work just fine, but now very poor.  I tried another router and has the same problem.  I found no solution in the forum that makes my 9700 working properly.  If I connect to the weather apps Bug or Thomson Reuters. WiFi works great, load fast and I can see the data on my router blink indicating data streams, but whenever I use the BlackBerry browser, it won't work!  Crazy!

  I found the same thing as automatic power switch at night is interfering with connections no matter what I did. So I stopped using it and it works fine now manually turn it off. Not much extra actually works!

• Capsule WiFi does not

  A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

  The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

  We have just upgraded to OS X El Capitan 10.11.6

  I'm pretty confident that the problem is with time capsule, the wifi works with the other router.

  When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

  Any help would be appreciated.

  Thank you.

  Amazing!

  I am so embarrassed but understand that I would update in the case where everyone does the same thing.

  When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

  Sometimes, just come back to square one.

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

  My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
  How can I fix?

  There is wifi on other computers, but not on this laptop.

  Hello

  You always win 8?
  Microsoft has already published the Win 8.1 System.
  It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

  The 8.1 update win is free and you can download the Microsoft Store update files.
  Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

  I guess that after updating the WLan would work properly.

• WIFI does not work on the Satellite L650/078

  Hello
  Hoping someone can help, on my Satellite L650 WIFI does not work.
  No Wifi or Bluetooth functionality. The light is not on and the function key is not brining to the top of all the options.

  Any ideas on how to solve this problem?

  Hello Covie

  Do you use the laptop with the factory settings?
  When you use the FN button you find cards flash at the top of the screen?

  Try please restart flash cards. Start > all programs > Toshiba > utilities.

  Please post comments.

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• Satellite L300D - installed XP and now my wifi does not work

  I spent from Vista to XP and now my wifi does not work. I was told that I don't have the drivers.
  Can someone help me? I have a Satellite L300D-01N. Please help me, I don't know much about this kind of stuff.

  Thank you

  You can download drivers Toshiba from here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There is however no driver XP for the L300D. But I found a LAN driver for XP wireless that would work.

  Select:
  Laptop
  Satellite Pro
  Satellite Pro L series
  Satellite Pro L300

  Download and install
  -Wireless Lan Driver Realtek Semiconductor Corporation Windows XP 6.1116.1226.2007

  If this does not work, you can have an Atheros Wireless LAN card. If this is the case, look at the other models for an Atheros Wireless LAN Driver XP.