WiFi drops every 10 minutes El Capitan 10.11.4

Similar Questions

• Wireless network connection drops every few minutes after windows update.

  Original title: dropped internet connection

  I had trouble with my laptop give up wireless connection.  Received a patcha and everything was fine until the last windows update auto.  Same problem again.  I have to constantly reset the wifi.  I run a diagnosis and I get the message that the wireless adapter has been corrected, but it won't always stay connected.  VERY frustrating.

  Hi Ccolvin3,

  Windows can be disable your network adapter to save power. Disable the power saving option in the network adapter properties. To do this, try the following steps.

  a. Click Start, type devmgmt.msc and press to enter.
  b. in the list of objects, expand network adapters.
  c. double-click the sub element that means wireless network cards.
  d. click the power management tab.
  e. uncheck all options on the power management tab.
  f. apply the settings, and then restart the computer to check the difference.
   
  We recommend that you also download and install the latest driver for the card from the device manufacturer's Web site or system wireless.
   
  Download and install the latest service pack on the computer. See this article for more information:http://support.microsoft.com/kb/935222
   
  Check out these links for more information:

  Solve problems, find wireless networks:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Wireless connection is periodically lost:
  http://support.Microsoft.com/kb/814080

  Wireless network connection drops every few minutes:
  http://support.Microsoft.com/kb/814123

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Agent to drop every 11 minutes and reconnect

  Windows tide master 5.3.1.396

  Added windows 3.1.0.05 agent

  Just added new Agent and agent is down every 11 minutes

  Re-installed agent and not restarted no chance

  Check agent log and I'm seeing this:

  _20141217 13:36:53 resource Configuration - settings: active = Master 0 = ES_INVJOBSCHED01_1 CpuPoll = VmemPoll-1 = - 1

  _20141217 13:47:56 Master Agent ID increased from 265 to 94

  _20141217 13:47:56 connection to the master of port [email protected]/ * /.

  _20141217 13:47:56 request for suspension received from master ES_INVJOBSCHED01_1, master Unregistering ES_INVJOBSCHED01_1

  _20141217 13:48:01 Master Agent ID from 94 to 265

  In file attachments on agent ID = 265

  Checked nodmst table I see ID 265 and is assigned to the right node, this node, there is no node 94.

  Any ideas?

  I know that there is a newer version of windows available agent. Don't know if there is no problem of compatibility with 5.3.x. maybe try to use to see if the problem persists?

• SG300 - 28 p: POE power drops every few minutes

  Hi all

  We have a SG300 - 28 p which, at intervals between 5 and 30 minutes or more, lower power to all its ports POE-powered and then immediately restores power. Switch logs nothing when this happens other than to record that the ports went down and back up, even with debug logging enabled. Non - POE ports are not affected.

  When the problem started there were only four POE devices on the switch and we are far under our power budget. (During the test, I added a fifth device, see below.)

  Not all combinations of devices cause the drops occur - specifically, it seems that having devices on ports next to each other causing the drops. When the drops occur, absent the increment of POE devices all counters. I noticed this thread earlier here seemed similar:

  https://supportforums.Cisco.com/thread/2165089

  but in this case, he got no power at all in the adjacent configurations, instead of having to drop all the several minutes.

  I am running

  SW06 #sh worm

  SW version 1.1.2.0 (November 12, 2011 time 23:34:26)

  Start the 1.1.0.6 version (date may 11, 2011 time 18:31)

  HW version V02

  I have the 1.2.2.7.6 ready to go new firmware, I will update this when I get a chance to test it. Unfortunately, it's a switch of production, but it's a with relatively few devices to it so far. If need be, I have a sf300 - 48P I can exchange this sg300 ENJOI trials.

  Thank you for anything you might suggest.

  Here are the details:

  -' Phone' is a phone to IP Avaya 4610SW or 5610SW (class 2)

  -"Watchdog" is an environmental monitor IT Watchdogs Watchdog 100 (class 0)

  -"WAP" is a Cisco WAP4410N (class 3)

  All initially due to lack of combination:

  GI10 phone #1

  gi22 phone #2

  dog guard gi23

  WAP gi24

  would result in the POE power to place on all ports, every 5 to 30 minutes.

  I disabled Green Ethernet completely - no change.

  And then made the following tests:

  1. "power never inline" on gi23 and gi24: problem disappeared

  2. 'inline power auto"on gi23 and gi24: problem is back

  3 ' power inline never' on gi23 only: problem disappeared

  4 ' auto of inline power' on gi23: problem is back

  5 ' power inline never' on gi24 only: problem disappeared

  6. "power inline auto" on gi24: problem is back.

  I left gi23 powered throughout the night and it was stable: it's about 10 hours without any problem.

  This morning, tried the following configs:

  08:54 - worked fine

  IG4 watchdog

  GI10 phone #1

  gi22 phone #2

  WAP gi24

  10:31 - added another phone, the problem came back

  IG4 watchdog

  GI10 phone #1

  gi22 phone #2

  gi23 phone #3

  WAP gi24

  10:43 - inappropriate phone #3 to IG11 (next) - problem continues

  IG4 watchdog

  GI10 phone #1

  IG11 phone #3

  gi22 phone #2

  WAP gi24

  11:00 - moved phone #3 to gi8 - suite problem

  IG4 watchdog

  gi8 phone #3

  GI10 phone #1

  gi22 phone #2

  WAP gi24

  11:31 - moved phone #3 article IG 14 - the problem disappeared

  IG4 watchdog

  GI10 phone #1

  Article IG 14 phone #3

  gi22 phone #2

  WAP gi24

  and that's where we left things now are stable for about four hours.

  The following products are the config more later (11:31).

  SW06 #show power inline

  Power-limit based port mode

  Nominal consumed power unit power use threshold traps

  ---- ------- ------------- ------------------ --------------- ---------

  1 of 180 Watts 18 Watts (10%)         Disable 95

  Port power status device status priority class

  -------- -------------------- ---------------- ------------ -------- ---------

  Article IG1 Auto search low class0

  IG2 Auto search low class0

  IG3 Auto search low class0

  IG4 Auto on low class0

  IG5 Auto search low class0

  GI6 Auto search low class0

  gi7 Auto search low class0

  gi8 Auto search low class0

  gi9 Auto search low class0

  GI10 Auto on low 2

  IG11 Auto search low class0

  gi12 Auto search low class0

  ig13 Auto search low class0

  IG 14 Auto article on low 2

  gi15 Auto search low class0

  gi16 research Auto low class0

  IG17 Auto search low class0

  gi18 Auto search low class0

  IG19 Auto search low class0

  IG20 Auto search low class0

  IG21 Auto search low class0

  gi22 Auto on low 2

  gi23 research Auto low class0

  gi24 - Auto on low class3

  -watchdog:

  SW06 #show power inline IG4

  Port power status device status priority class

  -------- -------------------- ---------------- ------------ -------- ---------

  IG4 Auto on low class0

  Limit of power (for the mode of power-limit of port): 15.400W

  State of the port: Port is on - valid resistance detected

  Overload counter: 0

  Brief of counter: 0

  Denied Counter: 0

  Absent of meter: 4

  Invalid Signature counter: 0

  SW06 #show interfaces announce IG4

  Port: IG4

  Type: 1 G-copper

  Link state:

  Autonegotiation: enabled

  1000F 1000 h 100f 100 h 10 h 10f

  -----  -----  ----  ----  ---  ---

  Link admin Local advertising Yes No Yes Yes Yes Yes

  Local liaison Oper announced Yes No Yes Yes Yes Yes

  Oper Remote link Announces no no Yes Yes Yes Yes

  Resolution of priority - Yes-

  -Phone:

  #show power inline gi10 SW06

  Port power status device status priority class

  -------- -------------------- ---------------- ------------ -------- ---------

  GI10 Auto on low 2

  Limit of power (for the mode of power-limit of port): 15.400W

  State of the port: Port is on - valid resistance detected

  Overload counter: 0

  Brief of counter: 0

  Denied Counter: 0

  Missing Counter: 465

  Invalid Signature counter: 0

  #show int adv gi10 SW06

  Port: gi10

  Type: 1 G-copper

  Link state:

  Autonegotiation: enabled

  1000F 1000 h 100f 100 h 10 h 10f

  -----  -----  ----  ----  ---  ---

  Link admin Local advertising Yes No Yes Yes Yes Yes

  Local liaison Oper announced Yes No Yes Yes Yes Yes

  Oper Remote link Announces no no Yes Yes Yes Yes

  Resolution of priority - Yes-

  -Phone:

  SW06 #show power inline article IG 14

  Port power status device status priority class

  -------- -------------------- ---------------- ------------ -------- ---------

  IG 14 Auto article on low 2

  Limit of power (for the mode of power-limit of port): 15.400W

  State of the port: Port is on - valid resistance detected

  Overload counter: 0

  Brief of counter: 0

  Denied Counter: 0

  Absent against: 0

  Invalid Signature counter: 0

  SW06 #show int adv article IG 14

  Port: article IG 14

  Type: 1 G-copper

  Link state:

  Autonegotiation: enabled

  1000F 1000 h 100f 100 h 10 h 10f

  -----  -----  ----  ----  ---  ---

  Link admin Local advertising Yes No Yes Yes Yes Yes

  Local liaison Oper announced Yes No Yes Yes Yes Yes

  Oper Remote link Announces no no Yes Yes Yes Yes

  Resolution of priority - Yes-

  SW06 #.

  -Phone:

  #show power inline gi22 SW06

  Port power status device status priority class

  -------- -------------------- ---------------- ------------ -------- ---------

  gi22 Auto on low 2

  Limit of power (for the mode of power-limit of port): 15.400W

  State of the port: Port is on - valid resistance detected

  Overload counter: 0

  Brief of counter: 0

  Denied Counter: 0

  Missing Counter: 591

  Invalid Signature counter: 166

  #show int adv gi22 SW06

  Port: gi22

  Type: 1 G-copper

  Link state:

  Autonegotiation: enabled

  1000F 1000 h 100f 100 h 10 h 10f

  -----  -----  ----  ----  ---  ---

  Link admin Local advertising Yes No Yes Yes Yes Yes

  Local liaison Oper announced Yes No Yes Yes Yes Yes

  Oper Remote link Announces no no Yes Yes Yes Yes

  Resolution of priority - Yes-

  --also was the watchdog, now empty:

  SW06 #show power inline gi23

  Port power status device status priority class

  -------- -------------------- ---------------- ------------ -------- ---------

  gi23 research Auto low class0

  Limit of power (for the mode of power-limit of port): 15.400W

  State of the port: Port is disabled - detection is in progress

  Overload counter: 0

  Brief of counter: 0

  Denied Counter: 0

  Missing Counter: 587

  Invalid Signature counter: 0

  -wap:

  SW06 #show power inline gi24

  Port power status device status priority class

  -------- -------------------- ---------------- ------------ -------- ---------

  gi24 - Auto on low class3

  Limit of power (for the mode of power-limit of port): 15.400W

  State of the port: Port is on - valid resistance detected

  Overload counter: 0

  Brief of counter: 0

  Denied Counter: 0

  Missing Counter: 607

  Invalid Signature counter: 3

  SW06 #show int adv gi24

  Port: gi24

  Type: 1 G-copper

  Link state:

  Autonegotiation: enabled

  1000F 1000 h 100f 100 h 10 h 10f

  -----  -----  ----  ----  ---  ---

  Link admin Local advertising Yes No Yes Yes Yes Yes

  Local liaison Oper announced Yes No Yes Yes Yes Yes

  Oper Remote link Announces no no yes no no no

  Resolution of priority - Yes-

  Other useful bits:

  SW06 active spanning tree #show

  Spanning tree disabled mode (floods BPDU) RSTP

  By default port cost method: long

  SW06 #sh worm

  SW version 1.1.2.0 (November 12, 2011 time 23:34:26)

  Start the 1.1.0.6 version (date may 11, 2011 time 18:31)

  HW version V02

  Hi Rich, reference this photo I just drew is a rough interpretation of how a switch 24 ports has guts. Each + block represents a processor. The numbers below represent the port Bank that corresponds to the transformer. Of course, MODULE POE is clearly identified. Each module 12 POE ports for services.

  I think you have a completely different question. If the POE works for 5 to 30 minutes, it can be a problem of layer 1 (bad son) or a different, perhaps material condition being disturbed. If the switch is at fault, it seems more likely to be defective to a unit of buggy.  I did a lot of research on the operation of the switch ASIC, transformer and modules of POE in the cohesion.

  Quite frankly, I think you should go to the 1.2.7.76 firmware, factory reset the device and test all the ports you want using the same equipment. If maintaining the POE fall every 5 to 30 minutes and you are absolutely positive, that it is not a question of layer 1 or a configuration problem on your products, can I just replace the switch.

  

  -Tom
  Please evaluate the useful messages

• Internet connection drops every 30 minutes

  I'm chasing a frustrating problem on one of our HP laptops.

  The laptop loses its internet connection after 30 to 60 minutes, and the only way to get it back is to restart the PC.

  The PC is a dv6 Pavilion with Intel Core i5 processor chip.

  Operating system is Win7 Home Premium SP1

  Network adapters that I show are:

  Intel WiFi Link 1000 BGN

  Microsoft Virtual WiFi Miniport Adapter

  Microsoft Virtual WiFi Miniport Adapter #2

  Realtek PCIe GBE Family Controller

  Antivirus is MS Security Essentials

  Router is a Cisco/Linksys E1500

  The modem is Actiontec M1000

  Is DSL through Qwest

  The error message we get when internet stop working, said something about "cannot find DNS", I will copy it down the next time it happens.

  The PC only to lose the connection is this.

  Reset the modem and the router not to find an internet connection.

  The problem occurs if the PC is connected via a cable or wireless

  When the PC loses the internet connection I can still see and ping it to other PC, and you can still see the other PC.

  Here's what we've done so far without success:

  Run the Network Diagnostics can not find the question

  Router and modem reset

  Reset TCP/IP and restarted (netsh int ip reset c:\resetlog.txt)

  Off the hidden network adapters:

  6to4 MS card

  Map of ISATAP MS 1-4

  Teredo Tunneling Pseudo-Interface

  (all these returned when we restarted)

  Change DNS servers on the local network, Wi - Fi and on different servers

  Change the DNS from the router to the same servers 2 servers

  Restored the PC on 2 previous restore points

  Update Intel WiFi driver

  Don't scan last Antimalwarebytes - no problems found

  Turned off the firewall

  Removed McAfee (hate this stupid show)

  I am at a loss what to do next.   Any ideas?

  We try to be methodical obviously, starting with the simple and more complex.

  Thank you!
  Ian

  Hey archaeologist.

  I'm sorry that you run on the wireless issue. I need to know your number of complete product, the Intel wireless driver version number and the version number of the BIOS.

  Press FN + ESC keys to find your BIOS (' f # ') and product number.

  To find your version number wireless driver:

  
  1. click on the Start button

• Windows XP WiFi every two minutes of back and forth!

  I had to use my old Tablet Toshiba with Windows XP Pro.

  The WiFi connection is lost every two minutes, and then reconnect to be lost again in two minutes.
  Thanks for any help or words of encouragement, because this could be taxing on me, but I have to fix it.
  Ralph

  Hello

  1. What is the brand and model of the router?
  2. What is the model of the Toshiba Tablet?

  To resolve the problem, you can download and install the last set of network card drivers on the manufacturer's Web site based on the model number.

  For the troubleshooting steps based on the problems with network problems in Windows XP see the link below.

  http://support.Microsoft.com/kb/870702/en-us

  I hope that helps!

  We know the State of the question.

• VPN users drops after every 5 minutes

  Hello world

  We have users whose remote VPN drops after every 5 minutes.

  I need to know what things can check to solve the problem?

  The user connects by RSA Token.

  ISP connection is ok is not question.

  Something I can verify in SAA?

  Thank you

  Mahesh

  Client side, have you tested wired vs wireless to see if the problem exists in both?  If it's the only one, but not the other, try to update the drivers.  Also, if it's windows 7, take a look at the power settings in the control panel.  I saw where the aggressive powers will be stop standby network port.  Not that big of a deal in a LAN environment but it wreaks havoc on the VPN.

• FF "Force close" maintains when is not open in saying that the server does not - for this, every 5 minutes

  FF crashes when open, always try to send accident report.

  FF also pushes notifications as the 'App FF has closed because of a communication error with the server, etc.' this happens even when the 3 g and Wifi are enabled and functional. Occurs every five minutes or more.

  Makes about 24 hours I uninstalled, re-installed and then synchronized to the top with my other computers. Haven't seen the error message or a farm of strength since. Will let you know if anything happens, but it seems to be resolved now. Thank you all for your time and your help with this!

• My PowerMac boots almost every ten minutes in stand-by mood?

  I have a Power Mac (mid-2012) with driver OS X El Capitan version 10.11.4. In stand by mode the computer starts and stops almost every ten minutes. Have tried to locate the problem by restarting in safe mode and went through Control Panel without having to find the problem.

  My question: is this a problem known compared to OS X El Capitan, or is there something else the cause? And anyone know please how to fix this? Thanks in advance!

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Disconnections every 3 minutes - Satellite A100-386

  Hello!
  I have a very annoying pb... is the wifi connection is disconnected every 3 minutes about... I use a card intel pro wireless 3945 and there seems to be a pb with some routers, as I rarely connect pbs. I updated the driver, but it has not changed anything, so I was wondering if there is a specific configuration that could avoid disconnections?
  Meny thanks for any help

  Please do not be angry on me, but I really hate the validations where is posted not info on the laptop model and operating system preinstalled. What you think about this? Are these really not relevant Info for your problem?

  In any case, these instability WLAN problems are mostly solved by combination of driver and BIOS update. You have the latest version of the BIOS?

• Tecra M9 PTM91E: WLan Intel 4965AGN disconnect every few minutes

  I have a laptop M9, model PTM91E. The wireless connection keeps disconnecting (then again in reconnecting) every few minutes. This happens on all the wireless networks in that I try to connect. Here what I have on my laptop: -.

  Intel Wireless WiFi Link 4965AGN
  11.5.0.32 driver version
  26/09/2007 driver date
  XP Pro

  Toshiba suggest to upgrade to Windows Vista, I nigtmares on something.

  Someone else has the same problem? All solutions?
  Thank you

  I read on the similar topic on a satellite A210 and with the Atheros WLan card.
  The solution was a update driver BIOS and WLan

  So check it out.

  Good luck

• computer goes into sleep mode every 5 minutes

  My computer goes to sleep every 5 minutes in standby mode and needs to get back to where I left my password. I tried to change the power options, but he keeps doing. If I'm watching a video, the screen turns off and ask for my password, but you can still video game.

  Hello

  Open windows control panel, open personalization, click on the link to screensaver at the bottom right and in the next window, set the time in the area of 'Wait' for once you want before the screen saver appears, and click on apply. Or if you never get the logon screen, remove the check mark next to of "on resume, display the login page»  Click on apply to save the changes.

  Then open windows control panel again and click on Power Options, click Change plan settings next to your current power plan selected in the next window, set the time using the drop-down list next to "Turn wide Display" to a more acceptable level and then click on save changes.

  Note:  Set in the Options menu of food to be slightly longer than the time set in the Menu of the screen saver or you will never see your screen saver start.

  Kind regards

  DP - K

• Reactivate an authentic copy every five minutes

  Separated from this thread.

  This will be the report I copied from the tool... it started happening after I had to replace my card mother, and given that it is an OEM, don't know if this is the right place to ask for help. Going to check the manufacturer's website as well because I can't be bothered to reactivate an authentic copy every five minutes when I'm games. : P

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {8BB3A943-18A6-436E-B8D6-57C7C2406616} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: disabled
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {8BB3A943-18A6-436E-B8D6-57C7C2406616}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-2775977024-2303592651-3502414845GatewayNV76RInsyde Corp.. V2.18 20130225000000.000000 + 00009663D07018400FE04090409Time(GMT-05:00) Standard is03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800006-02-1033-7601.0000-1222012
  Installation ID: 015686342685555674170140867663413885423314471753651890
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 7QJB7
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 2
  Trust time: 01/06/2015 01:41:17

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:6:2015 00:56
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAEAAAABAAAAAwABAAEAln28 + lTsgk5ODQButkZe7jwjeKAucw is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  START ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  CO-SUBMISSION ACRSYS ACRPRDCT
  UEFI ACRSYS ACRPRDCT
  ASF! ACRSYS ACRPRDCT
  SSDT ACRSYS ACRPRDCT
  ASPT ACRSYS ACRPRDCT
  FPDT ACRSYS ACRPRDCT
  SSDT ACRSYS ACRPRDCT
  SSDT ACRSYS ACRPRDCT

  A Windows 7 OEM license is not transferable from one computer to the other. Change the motherboard, unless the replacement is identical to the original, is a new computer. That means that the copy of Windows 7 is more authentic because there use was limited to the original computer.

  It is rare for a replacement motherboard are identical.

  Try to activate using the product key on the COA sticker on the casing of the computer, or inside the battery compartment.

  

  How to activate a Microsoft product using Microsoft Product Activation Center
  http://support.Microsoft.com/kb/950929/en-us

  If this does not work, try to activate by phone.

  1 type slui.exe 4 in the search box above the Start button and press ENTER .
  2. Select the "country" you are in the drop-down list.
  3. choose the option "activate phone".
  4. stay on the phone (do not select or press any options) and wait for a person to help you.
  5. explain your problem clearly to the support person.
  6. the accompaniment of the victim should give you a confirmation code. Have a pen and paper ready and copy the information on paper.
  7. read identification details to the support person to confirm that you have written the ID correctly.
  8. Enter the ID number, then click 'Next' to complete the activation process.

• H323 incoming call drops after 5 minutes each time

  Hi people,

  Can you shed any light on this please?

  H.323 incoming call (numbering by IP)-> external F5-> Fortinet Firewall-> internal F5-> internal firewall-> VCS - E-> VCS - C-> autoattendent MCU

  The call drops after 5 minutes into the call, every time. We tried H.323 call to an internal endpoint, it falls as well. Looks like there is a value of the time-out period defined somewhere on firewall he or F5?

  Any suggestion is appreciated!

  concerning

  Chenzhe

  I hope this helps:

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/infrastructure/article...

  1. Term applied to network connections through the firewall limits. For example, a Cisco PIX firewall can have a timeout of the form control:

     timeout conn 1:00:00 udp 0:02:00 h225 1:00:00 h323 2:00:00

     (i.e. a list of names of Protocol recognized each followed by a timeout in hours, minutes, and seconds). This example requires a limit of 2 hours on the H.323 connections; However, it also imposes limits on the other protocols, which would also affect a video call (UDP and H225). Several different network protocols are involved in an IP video call. The call being demolished may cause a delay applied to all of them.

• HTTPS connection systematically disconnected every 2 minutes via VPN in Windows 8

  * Original title: VPN via https issues - win 8

  My wife works from home to connect to a vpn over an https connection and then connect to another piece of software based on the web through an https connection.

  It worked well until Christmas 2013 when she bought a new laptop with windows 8, upgrading to a connection high speed fiber (with the same Internet service provider) and had a new router.

  Since then it can connect to the vpn but once connected to everything that she's trying to connect an https connection systematically disconnected every 2 minutes.

  The vpn is connected, and also other programs outside the vpn as Skype and lync stay connected.

  His employer has built a new version of the web-based software as there was a problem with this and windows 8, but this has not solved the problem although it resolved all the problems of connection to his colleagues.

  Currently, she is able to connect via a desktop remotely to his employer (instead of the vpn) and then connect to the additional software via https.

  2 weeks ago she took his laptop in a House of colleagues and connected no problems whatsoever and maintained the connection.

  She informed her employer of which, after 3 months of development new software and maintenance to a remote office installation just for her, said now it must be a problem with the Internet service provider.

  PSI (EE) performed many tests and say there is no problem with the line and or they block certain ports etc.

  Today, she attempted to connect using a laptop with windows 7 (according to her an old) and had no problem that seems to rule out a problem of ISP or router problems.

  There seems to be a problem with windows 8 (regardless of Web browser - the same problem is present with ie, chrome or firefox), but only among us — even if I want to confirm that in trying a few more locations with different providers of Internet services, and that even in a different place)

  Anyway, after all this language of wood can anyone offer suggestions of what the problem may be or any what more ways to collect the information required to provide a solution.

  Thank you

  Hello

  We have dedicated forums for users of VPN. I suggest you to report your query in the TechNet forums to improve assistance in this regard.

  Here is the link for your reference:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope this information helps. If you have any questions, please let us know.