WiFi in application

Similar Questions

• Lack of ZTE A2109 Wifi sleep policy

  Hello people!

  Anyone know how to access the standby policy on ZTE A2109 wifi? Generally, it should be included in the advanced settings, but the option does not appear in my tablet. I searched my smartphone (Xperia S with stock ICS) option and the option is available.

  The thing is that I use CIFS to access my library of media stored in a NAS in my network manager domestic, so I play the sound on my tablet. But when the tablet screen turns off wifi, abandon the connection to my NAS and cut the flow of data. If I wake up, restores the tablet to login again and the audio stream continues.

  I'm under ICS 4.0.4 with ClockworkMod Recovery. I also tried to force the wifi to stay awake with third party such as wifi awake applications, but none of them worked.

  Thanks for the help!

  Guess it's a matter of PowerAmp. Yesterday, I updated to MCL201 (BTW, thanks for this mcl630) and I have questions then as streaming audio of my SIN. Wifi sleep policy is finally available and even during installation to be always on the cuts audio when the screen turns off. Guess it of a bug of PowerAmp or has something to do with the frequency of the clock of the Tablet when he sleeps.

• BlueRay BDPS1100; WiFi or not?

  I'm so confused. Site Web of BestBuy says

  A WiFi Ready Yes

  Wi - Fi built in no

  Site Web of the target States

  
  Features: integrated WiFi, Internet Applications, multilingual Menu, Parental Lock Control

  So there is Wifi anything, or have they made a mistake?

  Thank you.

  BDPS1100 is not a player wifi ready. He joined no wifi either.

  To connect the player to the internet you should use a LAN cable. You can see Manual for information 14.

  If my post answered your question, please mark it as "acceptable Solution".

• Option of mobile data on the control center

  Hello

  I use the WiFi in the office and home and when I go out on the street will use mobile data. Unlike Android OS to iOS, we will have to go into settings to activate mobile data.

  So I thought it would be a great help if we have mobile data option power button turn on the Control Centre, which would help users like me save a few keystrokes whenever pass WiFi Mobile Data.

  I have not found a source to post this suggestion/idea, so let down here.

  Any help to make this idea of joining Apple would be appreciated!

  Thanks in advance...

  You can offer your comments Apple here.

  However, I don't see the advantage or the purpose of what you are suggesting. If the WiFi is enabled, and you have a WiFi connection, applications will not cell phone use. There is no need to turn it off. What you ask is already built into the unit.

• How to install iTunes on my iPad 2 Air

  I would like to transfer a file ppt (PowerPoint) to my Windows laptop to my iPad 2 Air but I need first to install the latest version of iTunes on my iPad. The problem is that I can't find the right itune app on the app store. Pls help, appreciate it

  You need to install iTunes on your computer, not the iPad - iPad already has an app Store iTunes top (for browsing the store and purchase/download of media), which is the only iTunes for your iPad app.

  To synchronize content from a computer to the iPad you have iTunes installed on the computer. You have not installed on this computer, which is the computer that sync you it with iTunes? If no go want to sync other content e.g. music, movies etc. - If you do there are a few steps on this thing for synchronization to a new computer: synchronization to a 'New' computer or replacing a hard drive "crashed"

  To copy a powerpoint on your iPad, you need an app on your iPad that supports this type of file (iPads is not a file system as a computer, everything is stored in the applications). To get the file from your computer to this application, you might be able to use the section in iTunes (on the sharing of files on iPhone, iPad and iPod touch - Apple supported ), file sharing or file by e-mail to yourself and use "open in" in the Mail app on the iPad, or use DropBox or copy it via your wifi - different applications network supports the different transfer methods.

  (I asked for your message to be moved to use iPad forum, where you have posted is for questions about the iTunes U app.)

• Hi, my iphone calendar 6 freezes, how can I make sure that it works correctly?

  My iphone seems to work normally, however I encounter some problems with my calendar that freezes often (I can't use the touch screen to select a date or navigate up and down day).  Anyone know a fix?  My software is up to date (IOS 9.2.1).

  Thank you

  Hello matclav,

  Thank you for using communities of Apple Support.

  I see that your calendar on your iPhone app is cold. Have you tried the following steps:

  Restart the application

  Close the application , and then open it again.

  Restart your device

  Turn your device, then turn it on again.

  Look for the iOS and app updates

  1. Make sure you use the latest version of iOS.
  2. Open the App Store and press updates.
  3. If updates are available, click all to update.
  4. If requested, enter your Apple ID.

  You might need a WiFi update applications.

  These steps are in the following support article:

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  If it still does not work, let know us and we can see what needs to be addressed on the next.

  Best regards.

• FE and Razr Droid Xoom

  Maybe I'm doing something impossible, but I want to associate my Droid Razr with my FE Xoom using Bluetooth. They have successfully pair but not connect. I basically want to share the data from my phone without paying for the wifi hotspot or phone rooting.

  Maybe I'm doing something impossible, but I want to associate my Droid Razr with my FE Xoom using Bluetooth. They have successfully pair but not connect. I basically want to share the data from my phone without paying for the wifi hotspot or phone rooting.

  
  

  Greetings ejb426,

  Like drago mentioned, there are file BT and WiFi, sharing applications on the market, but they don't allow you to share an Internet connection. You need to attach or a WiFi area reactive on the device of source of data (your Razr phone in this case) to enable connection sharing. In fact, I have a Razr phone Droid myself (provided by my company) and three tablets, including the Xoom FE. Since my company has their own data plan, they allowed the reactive capacity of Droid Razr so I can connect the Xoom FE when I use it for business purposes (for example presentations customer, site travel sellers, etc..). It's the only legitimate (and legal) way to share the data between devices phone plan.

  Please note the rules and political positions that bypass the agreements (e.g. sharing data from your phone without having to pay for the option).

  -Doc

• Turn off filtering by MAC address

  Hi, I recently got WIFI for my house. I want to use wifi on my ipod touch but even when I add and connect to my network with the password. I can't use wifi and applications that require a connection. Most people say that I have to turn off my MAC address filter to make my ipod touch can access the internet. Thank you.

  MAC address filtering is enabled or disabled in your wireless router.  It is disabled by default and would be activated only if you have explicitly configured the router like this.  See the user manual of your router for more information, or tell us the router brand and model number. Steve Winograd, Microsoft MVP (Windows desktop experience)

• Primary WRT1900AC & comments networks on the same Radio channel

  Hi - Newbie here.

  The main network and the network of comments on my WRT1900AC occupy the same 2.4 GHz radio channel, regardless of the selection of a channel or using AUTOMATIC channel selection.  I want to change this scenario so that the primary network would occupy a channel (say, Ch. 11) and the guest network would occupy a different channel (say, Ch. 1).  I fell in my attempts.

  Change channel from the main network (for example, Ch. 11-Chapter 6) goes well, as checked the WiFi Analyzer application on a separate shelf.  For each network channels remain separated (Pri @ Ch. 6 & Guest @ Ch. 11) for about 2 seconds, then the guest network dutifully follows the Canal of the primary school where the two, then, reside (Pri & comments @ Ch. 6).  This second 2 delay leads me to believe that the two networks can be separated with success and coexist on two different channels, but only if the adjustment is made.

  I use the latest update of Firmware (Version 1.1.8.161917), and almost everything works perfectly.  I haven't checked for a situation similar to the 5 GHz band, but imagine that a cure for 2.4 GHz could be translated to a 5 GHz problem if it exists.

  Please do not hesitate to me flood with your knowledge.  Thanks in advance.

  Did a live chat with an environment of "agent" tonight, and, after some initial stumbles and a bit of the discussion on the issue, the agent said that "it's like that" and that the user doesn't have the ability to change the channel for feedback network.  Only I could answer that, unfortunately, Yes, the user makes, but in order to change the channel of Guest network, you had to change the channel of primary network.

  So, for now, 'that's it!

  Guess I'll have to wait for firmware open stable source to be released so that I can flash and dig a little deeper into the router.  Until then, I'll just scratching my head about the counterintuitive to have practice two networks on a radio band occupy the same channel, possibly generating interference of the internetwork.

  Thanks FurryNutz for your patience and your help.

• Have two networks. One is 'working '. The other is the "homegroup". 'work' to the internet. "residential"local group. IE cannot access the internet. Help

  So here's my problem:

  It is a routing problem.  In short, it comes down to how to get IE (or any application) to use a specific WiFi adapter with Internet and ignore the adapter WiFi that goes to a network is private with no internet.

  This is the situation and what I tried.   No joy.

  PC hardware:

  primePC = Win7-Pro with two WiFi.   WiFi-Internet and WiFi-Local-premium

  tabletPC = Win10-Home with a (currently) WiFi-Local-Tablet (not internet from now).

  Use the Description of PC hardware

  primePC is my laptop that I use for work and all the rest.  It goes where I go.

  Tablet PC is in my mobile office and stay in the van (office) when I'm on-site customer.  I use it for

  things like control my monitors in the van (office).

  Network:

  WiFi-Internet (primePC) is connected Internet router to the Internet.

  WiFi-Local (primePC) is connected via the Local router

  WiFi-Tablet (Tablet PC) is connected via the Local router

  Objective:

  WiFi-Local allows you to share files and use VNC for remote desktop.  (Win10-Home support not native RDP).

  Use wireless Internet to connect primePC Apps IE for example to the internet via WiFi-Internet connected to the Internet router.

  A photo is included.

  

  THE PROBLEM:

  Because primePC has WiFi-Internet and WiFi-Local, applications such as IE are getting confused.

  How can I say (other applications) to use wireless Internet for internet connection?

  What I tried:

  Have you tried ForceBindIP on Win7, but is no longer works.  I'm sure that at some point, it has worked.

  Even if I could make it work, I don't really like it.   There *.   I don't want to link to an IP address.  I want to

  link to a Mac address is the Mac of the WiFi-Internet address.

  Other Options:

  Soft router (ugly) There must be something that can do this.  But I have not found one.  I guess it's a kind of soft router.

  Firewall, routing (still ugly)

  I have a firewall (on average by the way).   Creating a routing table in AVG is not good for the following reason.

  The entire Setup is mobile.    WiFi Internet is constantly connected to different internet routers, so learning new IP address that I have no control over.

  Future:

  Currently, the problem is on the primePC.   But in the end, I have also a problem similar with tabletPC, since the tabletPC is going to have a 3G connection / 4G to the internet.  This connection will go up and down based on (A) if I have internet with WiFi-Internet-router or not.   Using a hub of 3G / 4G for private network will not be good option because (A) the security because it allows access to my tablet, another security van mobile devices (B) cost of using a mobile router WiFi "hot spot" vs just to have two phone lines, both have unlimited data service of attachment (not unlimited hotspot service).

  Hello

  According to the description, I understand that you have a routing problem, you try to get IE to use a specific WIFI adapter with the internet, while ignoring the other WIFI adapter that goes to a private network.

  It is not possible to connect two computer to the same WIFI cards. You must unmark a WIFI to use the other WIFI adapter.

  You can search using your search engine to find any third party software which may help you.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  your computer is connected to a network domain?

  If your computer is connected to the domain network, then I would recommend to post your query on TechNet Forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful.

• Restore from blackBerry Smartphones - please help

  Here's the problem that started from the first day after I've owned my torch. whenever I come to files or update my OS. the procces is going very well through the first steps (to connect to the device, the device data backup, back up third-party applications) but when it gets to the 4th step which is connect to the device ROM. The phone reboots and takes forever to charge until the expiration of the time limit and I get an error saying "the lodaer of the application could not connect to your BlackBerry." She suggests going to the Device Manager and go to properties of USB root hub => allow the computer to turn off this device to save power. which is in fact already active

  What I usually do after waiting and waiting is I unplug the phone from the computer and do a battery pull. The phone restarts successfully, I click on start and the charger connects to boot ROM then the whole update continues.

  But the question is, is the update done successfully? probably not. I continue to have problems with the 3 G, wifi, many applications running.

  I love my torch and I hope to keep it, but I really need to understand this. It's very frustrating

  Thanks in advance for any help

  anabilal wrote:

  He suggested to go to the Device Manager and go to properties for USB root hub => allow the computer to turn off this device to save power. which is in fact already active

  This should in fact be "DISABLED".  You don't want the USB hub to be disabled during a process he uses.

  In addition, you can consider an own Desktop Manager uninstaller, and then re-download the software with the latest version, you can get here.  This table will also include the latest drivers for your USB ports, but make sure that you disable powersaving mode.

  Let us know if this solves your problem!

• Unable to download the application over wifi

  Hello!

  Hope that everyone else is doing great!

  I need assistance with the download request.

  Whenever an application is more that 100MB ios detects that it cannot be downloaded because it's over the limit, that what I do is to connect to a secure WiFi hotspot. I can browse and stream, but every time I download as update of iOS or just update my apps it does nothing and I have just an error message. I did research on all the forums to get a fix, which includes logging on Apps Store, force reboot and enable restrictions, but none of that works. However, when I connect to another iPhone via personal hotspot, it downloads but I can't always have a friend that will bring a personal hotspot when I needed. Is there another fix or troubleshooting steps I can do?

  Please see the screenshots.

  .

  Thank you for your help.

  Try:

  (1) reset network settings: settings > general > reset > reset network settings. Join the network again.

  (2) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

• Why is that every time I open an application that my phone disconnects from the wifi

  Everytime I open an application that my phone disconnects from the wifi.

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Phone cannot download and update applications using data or connect via wifi

  A few days ago, I noticed that whenever I have download applications, it is not download immediately and takes maybe a whole for download day actually. I thought it was because I have too many photos/apps on my phone, so I deleted about 10 g of memory, and it still doesn't work.

  I also tried updating my long list of applications that have not been updated, but also does not work (it is set to automatic update)

  I have just updated my software to 9.3.1 but could not do so through my phone directly because it could not verify the updates. I've updated through my iTunes successfully but noticed even after I can't download/update all apps, and when I go into settings and verify software updates, I get an error message that says it can't check the updates.

  Now I can't even connect to my wifi, but my laptop has no problem to do. I have reset the settings network, factory settings and all the people at the Apple Support suggested but nothing works.

  I read somewhere to match iTunes of new conditions and have also made with nothing doesn't.

  Someone at - it other solutions I could try?

  Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Please see recommended settings of WiFi routers and Apple access points
  4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
  6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
  10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Disable applications that use wifi?

  Y at - it app, or a quick way to break/disable applications that use the wifi on my MacBook Air OS10.11.4 running?
  In other words, is there something that I can use to Dropbox and Google Drive interrupt synchronization, the break of Carbonite and switch Outlook in offline mode? Note that I'm not talking about simply turn off the wifi. These applications continue to check for a wireless connection, even after the wifi is off, using energy unnecessarily.

  So I was wondering if there is some kind of a gadget that knows what applications are based on wifi and can put all pause or reactivate them all, instead of me having to remember and do each manually.

  Any ideas anyone?

  To be effective you must really be looking for anything that uses the network. The things you mention (Dropbox, Google Drive, Carbonite and Outlook) have no idea if you are on WiFi or not. They are simply looking for a network connection.