OfficeJet 4500 g510g does not print

There has been no change to my computer, operating system, settings, etc. but my printer is printing suddenly is longer.  I was able to print the test page directly from hp.  I can copy and scan. I can 'see' the printer and all settings seem correct.  I can communicate with the ch and see the level of ink etc.  However, when I send pictures docs to print there is a mistake and nothing prints.  Troubleshooting found no errors.  I tried to use the USB and cables ethernet - no difference.  Any ideas?

Delete all those and then try to install again. If you install via the USB port, make sure you do not connect to the printer until the software asks you too. Let me know what happens.

Tags: HP Printers

Similar Questions

  • OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

    I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

    Hi @thrandall,

    Thanks for getting back to me.

    My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

    Have you tried these steps in my previous post?
  • HP OfficeJet 4500 Wireless: OfficeJet 4500 Wireless does not print

    I just inherited this printer and it's a step above my F380, I installed it.

    It scans very well and sending scans to the computer, but when I try to print or copy, even if it goes through the process (the book covers and print heads move back and forth) nothing appears on paper.

    The cartridges that came with the printer I record as being almost 100% and I ran print and scan doctor nothing is done.  The Test Page 'prints' white also.

    Is there anything else I can try before you buy new cartridges?

    TIA

    Try these videos Youtube here.

    https://www.YouTube.com/results?search_query=OfficeJet+4500+PRINTHEAD

    Find out more if necessary.  If no joy, your printer is toast.

  • My HP Officejet 4500 G510 does not print

    I followed the instructions under 'unable to print' Solutions from HP, guided in the HP - 'diagnostic' even downloaded - tool solution Center does not. All tests indicate that my printer works very well (in Windows XP Professional)- but when I try to print a document the printer produces a blank page.

    Help, please!

    Hi Shane_R,

    Your methodical and complete response to my response rate 10 out of 10 for my problem with success.

    It turns out that I had a problem with ink cartridge. After replacing both cartridges (color & black) my printer HP is once more printing perfectly.

    I'll be keeping the document you provided on the subject at a later date if necessary. It is a treasure house of well & precisely formulated procedures to follow.

    Bravo, Shane_R.  You're an asset to HP.

    With deep gratitude,.

    nikkitrix

  • 4500 Wireless: 4500 Wireless does not print

    Hi, I have an Officejet 4500 Wireless printer. I set up the wireless connection to the printer, downloaded the software on my Macbook Pro OP Lion 10.7.5. Tried to print but queue indicates "printer is not available. Tried the reset from the list of printer/scanner on my computer, but still no solution.

    Before I tried this with my Mac as PC with which the printer not working anymore. Tried reseting printer list unplug the printer when turned on and many other recommendations of FAQ. I even tried to use a USB cable between the computer and the printer. Queue sometimes indicates that the printer was not available, and other times the loading bar % completed as if printing but nothing happened with the printer itself.

    Printer does not print with the PC or laptop. Any suggestions? Thank you.

    Hi again @franshe08!

    You're welcome and thank you for answering!

    I now resume our path to troubleshooting software. Please try these steps, everything in order, and I hope that you will be able to print later. These steps rarely let me down, fingers crossed.

    1. Reset the printing system
    2. Repair disk permissions
    3. Restart the Mac.
    4. Click on this link, download and install the complete driver: HP Officejet full feature software and drivers - OS X v10.7
    5. Try to print again. Try Text Edit, among other applications.

    Let me know what happens!

    Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

  • HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

    I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
    In the first computer (windows 7) I can print without any problem
    On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
    I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
    Thank you for your advice

    Hello

    Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  • OfficeJet 6500 intermittently does not print half of the last line in the lower doc

    Using an Officejet 6500 E709a connected to Windows 7 64-bit PC via ethernet LAN.  Intermittently, the printer is unable to print a part of the last line of the document.  A 12 point font for example it does not print the bottom half of the letters on the last line of text.  What software (word, excel, PDF, etc.) and it does not matter hwer on the page of the last line falls.  It occurs only on the last page of multipage documents.

    Try that and see if it helps the question:

    1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Search text box and press ENTER. The Printers window opens.

  • OfficeJt Pro 8620: OfficeJet pro 8620 does not print

    My new 8620 habit simply printed.

    Scan and these images successfully appears on the laptop.  Wireless connection is strong and recognized.  can print from 2 different iPhones, but nothing of the laptop.

    Print Manager and HP Web site so tell me the printer is online and ready, and is the default printer recognized and there is no problem with the printer.

    Same printing page Web HP EWS but nothing else of the laptop may print

    Running HP Print & Scan Dr. (about 4 times) and the test page does not print, but I can print the internal test page.  Then say it is a software problem and uninstall.

    Have uninstalled and reinstalled twice, completely deleted printer off, unplugged, ALL but nothing doesn't make this stupid boring piece of manure impression

    Not sure whether I'm under Windows 10 32 or 64 bits.  Remember exactly where to find this info.

    Urgent need help I have work to do.

    Thank you

    Hello

    Thank you for using the HP forum.

    Have you tried to install the HP printer software?

    You can download and install the software FULL of HP printing features to win 10 (32/64-bit):

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0K8UDA0AQC11TA930C7

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    Let us know if it works and what are the errors that you see.

    We recommend that you uninstall before reinstalling the previous software.

    Hope that helps.

  • OfficeJet Pro 8620: Does not print color

    My 8620 Pro Offoce prints only in black except when I print a test page. I have a Mac running OS X El Capitan. I have updated the drivers so that changed with hp ink cartridges ink cartridges. I can't understand why nothing prints in color. Can anyone help?

    Welcome to the HP community @Walt_1,

    I wanted to tender hand to try to help with the problem you are having with your Mac running 10.11 does not print black when you use your Officejet 8620. As the test print black pages, we know that the printer itself works fine, and the problem is software partner. Here are some steps I suggest for you to try.

    Let me know the results if you please!

    Testify of my answer by hitting the thumbs to the top slot

    Click on the button "Accept as Solution" if I helped you reach a solution.

    Good luck, I hope this information helps

  • HP Officejet 6700 Premium does not print

    After that the seat the printer for too long (45 min to 1 hour), it will not be printed. If you turn it off and turn back on print on command. But then as soon as he sits too long (45 minutes to 1 hour) it does not print.

    Any suggestions?

    Hi asimetalsales, thanks for the reply.

    If you let the printer sit for the appropriate period of time, and you try to make a photocopy of the scanning flat glass, it works?

    I suggest also download and run the HP print and Scan doctor.

    Please let me know how it goes.

  • OfficeJet Pro 860: Does not print envelopes

    My printer stoped printing of envelopes. This produces both in Word & Word Perfect.

    Hi davidehouse,

    What happened when you tried the steps outlined in this guide, the printer prints blank Page or does not print black or color ink? Also, have you tried the HP print and Scan Doctor?

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    I hope hear from you soon!

  • HP Officejet 4500 Desktop does not connect properly

    I have a HP Officejet 4500 desktop computer.  I just finished with the CD that came with it.  I then put in the USB cord and he said: it is not connected.  Please help me.

    I really did a lot of research here to the course of action to take following the easier to understand.  In Windows 7, the menu options start to activate the USB connection in a wireless is easy to find. In Windows 8, it is quite difficult to find.  If this does not work, you have more chance to uninstall and reinstall the printer if you don't have any options to scan.  Here is my suggestion:

    1. first of all, try to scan using the HP Solution Center.  You can have the printer icons two on the left side of the solution Center.  Ensure the right one is selected and you are trying to scan.  If this fails, record the error here for me please.

    2 to get the Setup menu, press the Windows key and the letter R to get the run of pop up screen.

    3. type in programdata % and in this folder click Microsoft > Windows > Start Menu > programs > HP.  Here you see "Add a printer" or "set up wireless?  That's how you get to the second part of the installation at the prompt is displayed to add a wireless printer.

    Again, if you do not see it or a hard time finding it, you can have to uninstall the printer and restart it to see if it brings more options installation.  If you care to have multiple copies of the same printer, you might see if you install full feature software and drivers (link is for Windows 8 64 bit en) without first uninstalling the printer will also implement the options you need to connect a wireless printer.  I hope this helps.  Check out all of my links for more information on this topic.

  • OfficeJet Pro 8610 does not print the files, but other things work

    Hello

    I want to install a whole new 8610 to our computer with WIndows 8.1 HP's OfficeJet Pro and I use a USB cable.

    I installed everything correctly according to the setting (green controls along the + "full installation") and the printer is set as default (also with the green check mark).

    There is communication between the two because I can print test pages (head alignment, etc.) for HP printer app and I can also scan a doc to the PC successfully.

    Despite the light the printer in the print menu, when you try to print, I can't any print file from PC to the printer, an email or a Word doc.

    And what baffles me, is that I can see the printed file go into the queue for a bit of treatment, then it disappears as if it's done, but it is not an activity of the printer.

    I completely uninstalled and reinstalled nothing doesn't.

    This should take 10 minutes to Setup, and I just don't understand.

    Thanks for your help.

    Hi Ringo1115.

    You might try the recommendation at the following link.   If this does not resolve your problem, you might want to try the tool print and scan diagnostic.

    If one of them resolve your problem, please write it down as resolved.  In this way, others may benefit from your experience.

    I hope this helps you...

  • HP Officejet Pro 8100 does not print - wired network connection - Mac OS x 10.9

    I have my 8100 Officejet Pro connected to my home network via a wired ethernet connection. I use Mac OS X 10.9. We had ongoing problems with the printer is accessible via the network. Whenever we have set up the connection, it works for a few print jobs, but whenever we close the printer, the next attempt to print always fails.

    I just went through all steps to solve the problem. I went back to square one: reinstalled printer drivers on my MacBook Pro running Mac OS x 10.9; has passed through all stages of wired network connection. and now, every time I send a job to the printer, it fits like the receipt of employment and printing, but the printer itself does not.

    The Billboard on the printer indicates it is connected to the network. Print the Network Setup page confirms it is connected to the cable network. Visit the IP address of the printer via my web browser also confirmed. I am able to print a printer HP Print Utility status report, so I don't know that the computer network and the printer are connected and communicate with each other. However, I can't print from MS Word, PDF files or anywhere else outside of the HP Print utility. Work is revealed in the queue, where it shows the status of each page completely 100%, employment disappears, but does never print it.

    Help, please. This has been a problem since I bought the printer, and now that my warranty has expired, it's my last hope of fixing. I'm at the end of my tether with a device that I spent enough money on to expect to work, and it does not work properly literally since the day where it was purchased. All attempts to implement working temporarily, at best. Thanks in advance and if you need more information, please let me know.

    Hi DBG345

    I understand that you are now able to print from USB, but not on the network.

    There are a few things you can try.

    Connect the printer to the router with the ethernet cable.

    Unplug the USB cable.

    Get the IP address of the printer.

    Click on the Apple.
    Click on System Preferences, click on the print icon and scanning, select the printer, click the sign - to remove the printer. Then click on the + sign, then select the printer from the list, select the printer name first, if it does not try the driver airprint, (airprint is apple pre-installed with functionality of basic pilot) click on the Add button.

    You can try is to add the printer as a Protocol IP to see if it will work. Go to Apple, system, print, and scan preferences, click on + button, then select the icon of intellectual property across the top, type in the IP address of the printer, select direct stream below, then apply.

    Try to print.

    I would like to sign up for updates from the HP driver. When available, you will be informed by e-mail.

    Hope that helps.

  • New OfficeJet Pro 8620 does not print PDF files

    I have a brand new 8620 and I use Windows 7. My printer prints a few PDFs but not most other PDF documents. I am using Acrobat Reader XI. The printer will print from MS Office.

    HELP, please!

    Hello! Welcome to the @lmel forums

    I have a few ideas that come to mind, I read the issue you're having with printing of PDF files. They are here!

    1. try to resave the PDF files that do not print and then try printing again.

    2. update of Adobe:

    Select help - search for updates. If a new update is available, it installs automatically.
    Once installed, you can restart a computer.
    Then try to print the PDF file.

    http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

    3. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

    4. uninstalling the printer software

    Restart the PC

    Reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

    That should do the trick! Keep me abreast of the results!

    Have a great Wednesday

Maybe you are looking for

  • How can I become a FCPX certification if my country is not part of the training centre certified Apple

    Hello My name is Jose. I am 29 years old and I am originally from Caracas, Venezuela. I have been a FCPX user for about 3 years now. I want to get the Certification FCPX Apple, but in the section of the training centers of my country is not listed. I

  • Satellite L750 - cannot reboot from CD

    Hi all So I want to format my laptop (Toshiba Satellite L750) and to do this, I need to boot from CD, I did not how to proceed... I tried pressing F12 right after system reboot, F8, button Delete and even the key of C, neither of which works, I also

  • Pavilion 17-g173ca: use laptop without battery?

    When I bought this laptop a few months ago, the seller advised to remove the battery with power cord plugged. She said she would smoke less on the heat generated.  I wonder if this is advised.  If I remove the battery, I lose everything I'm working o

  • Control VXI Borland Builder

    Hi all I used to write small programs using Borland C++ Builder (very old) v3.0 control connected to the port, GPIB instruments. For this what should I include in my software is the "ni488.h" #include and bind "BorlandC_gpib - 32.obj". Now, I want to

  • Colors

    All I get is gray look things funny! Ive tried Windows tools, but cannot find the color panel here! Help!