WiFi loses connection intermittently and the erasure of the arp arranges

Similar Questions

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects

  * original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.

  Hi SCS PCs

   

  I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope this helps.

• Trying to connect to Acrobat Connect Pro and the message that your account has expired.

  Trying to connect to Acrobat Connect Pro and the message that your account has expired.

  Hello

  The duration of your account must have expired. You can contact the Adobe Connect Support to extend the life of your account.

  Thank you

  Sameer Puri

• Office Wifi dosnt connect, lan and other wifi connects

  I tried all solutions available including dns flush, order online renew, repair network adapter, disconnect ethernet and tcpipv6, windows restore, repair windows, restart the router etc. Nothing seems to work. When I connect via lan the same connection works. Can also be another wifi hotspot mobile also connected correctly. Windows 7 ultimate 32 bit running. Kindly help

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  This problem occurs only with the network of offices and you are able to connect WIFI networks, the issue seems to be with the WIFI network. I suggest you to contact your Office COMPUTER admin and check if the problem persists.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Great printer Officejet 7500 a Format to connect intermittently to the computer via the wireless network

  I have a portable printer Officejet 7500 has recently purchased that I would use wireless.  I have an Apple wireless router and am running Windows 7 on my computer.  The printer and computers individually connect to the network, and there is no problem with the router.  The problem is with the connection between the computer and the printer.  I can print things from my computer by sending a file to the printer, but sometimes it works through printing directly from the software.  I tried to scan my computer and the printer, but get the same error at the same time that there is no communication between the printer and the computer.  I suspect that it is a firewall problem, but do not know how to change the settings to allow this communication to occur.  I have the windows firewall and advanced software protective system, but have disabled the windows shield in this software.  Help?

  First of all, download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/printer_diag/&lang=en&softwareitem=oj-106151-2

  What did he say?

  Just to be clear, that the 7500 a is connected to the Airport via radio, correct (not USB)?

  If so, we will define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

• Disabled WiFi turns on intermittently and then turn off again?

  Can Hi anyone help me please

  I have vista windows XPS M1530 and recently started having this problem with the wireless internet. I was thoruogh all the tests with ISPS even had a new router and can connect with LAN without problem.

  I have intel (R) Wireless wifi link 4965AN and Marvell yukon 88E8040 PCI-E fast ethernet controller.

  Diagnostics Dell says the wireless is disabled, but it is not disabled in Device Manager? Diagnostics for Intel said the radio equipment is off, but the option button is now on my laptop.

  I reinstalled the drivers and not being not very technical can't think what to do next.

  Any help would be most appreciated that you have so.

  Elly

  Well WELL AFTER ALL OF THE TASKS THESE and NEW SWITCH ASSEMBLY

  IT DID NOT WORK!

  It's until I discovered the fix for Bluetooth not appearing don't not in Device Manager and does not not is a DELL utility found here

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?docid=272206#issue2

  It worked for me when all this ELSE including NEW SWITCHES ETC. DID NOT.

  Ignore the operating system, it's for this worked on my vista and my friends windows 7.

  It restored my bluetooth and also was the cause of my problems wireless

  IF ONLY I HAD DISCOVERED THIS WEEKS

  Elly

• Hi my game Center leaves me not to accept friend requests, load any games im unable to load data because of connectivity issues and the King Games I have when you want to send queries, you need to connect whenever fbk his shit

  Hi my game Center won't let me load any games or accept friend requests and when I try to accept queries etc. of friends on my King of games it's connect to facebook every time his shit. phone says on the game center connectivity issues I am not worked before

  Hi, kitecatgirl.

  Please visit Apple support communities.

  I understand that you experience connectivity problems when you access Game Center accepting friend requests.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you are unable to connect to Game Center or stay connected, follow these steps:

  1. Make sure that you are connected to the Internet.
  2. If you cannot create an account or sign in to Game Center of in a game, try to create an account or sign in with the Game Center app.
  3. Sign out of Game Center, then reconnect. If you can not you connect to Game Center with an Apple ID, reset your password, or use another email address. To manage your Apple ID, see my Apple ID.
  4. If you use a connection Wi - Fi, be sure that your Wi-Fi router is configured for Game Center.
  5. If you can't connect to a Mac, continue with the steps to solve the sign in questions.

  If you have a problem with a game of Game Center, follow these steps:

  1. Make sure you have the latest version of the game. To check for updates, go to App Store > updates.
  2. Test your connection by using a different game. If you cannot connect with a specific friend or player in multiple games, they might need to check their Wi - Fi connection and router settings.
  3. On iOS, try opening the game to the home screen, rather than the inside Game Center.
  4. If you cannot resolve the problem, follow the steps described in the next section to report the problem to the developer.

  Game Center on your Mac or iOS device using

  See you soon

• How do you remove user box activated once connected pc and the automatic removal of opening.

  Host user forums forums.

  How do you remove box Switced user when opening the pc and how to remove automatic connected? Please notify. Thank you.

  Sikki

  See the website below for more details

  http://www.Vistax64.com/tutorials/89939-fast-user-switching.html

  I hope this helps

  Good luck
  

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When online transactions should you activate private browsing before connect you and the Bank?

  I'm serious about security, when it comes to computers and I wonder if, before your bank, if you turn on private browsing?

  I do myself often to avoid Firefox to save pages in the disk cache.
  Firefox 15.0 had a bug on this issue, but that has been fixed in Firefox 15.0.1 and private browsing mode should work fine now.

• Problems connecting to help connect any and the Ipsec VPN Client

  I have problems connecting with the VPN client connect no matter what.  I can connect with the Ipsec VPN client in Windows 7 32 bit.

  Here is my latest config running.

  Thank you for taking the time to read this.

  passwd encrypted W/KqlBn3sSTvaD0T

  no names

  name 192.168.1.117 kylewooddesk kyle description

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  boot system Disk0: / asa822 - k8.bin

  passive FTP mode

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  domain wood.local

  permit same-security-traffic intra-interface

  object-group service rdp tcp

  access rdp Description

  EQ port 3389 object

  outside_access_in list extended access permit tcp any interface outside eq 3389

  outside_access_in list extended access permit tcp any interface outside eq 8080

  outside_access_in list extended access permit tcp any interface outside eq 3334

  outside_access_in to access extended list ip 192.168.5.0 allow 255.255.255.240 192.168.1.0 255.255.255.0

  woodgroup_splitTunnelAcl list standard access allowed host 192.168.1.117

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  outside_access_in_1 list extended access permit tcp any host 192.168.1.117 eq 3389

  woodgroup_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

  inside_nat0_outbound_1 to access extended list ip 192.168.5.0 allow 255.255.255.240 all

  inside_test list extended access permit icmp any host 192.168.1.117

  no pager

  Enable logging

  timestamp of the record

  asdm of logging of information

  Debugging trace record

  Within 1500 MTU

  Outside 1500 MTU

  mask pool local Kyle 192.168.5.1 - 192.168.5.10 IP 255.255.255.0

  IP local pool vpnpool 192.168.1.220 - 192.168.1.230

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 631.bin

  don't allow no asdm history

  ARP timeout 14400

  Global (inside) 1 interface

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound_1

  NAT (inside) 1 0.0.0.0 0.0.0.0

  public static interface 3389 (indoor, outdoor) 192.168.1.117 tcp 3389 netmask 255.255.255.255 dns

  public static tcp (indoor, outdoor) interface 8080 192.168.1.117 8080 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 3334 192.168.1.86 3334 netmask 255.255.255.255

  static (inside, upside down) 75.65.238.40 192.168.1.117 netmask 255.255.255.255

  Access-group outside_access_in in interface outside

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  the files enable exploration

  activate the entry in the file

  enable http proxy

  Enable URL-entry

  SVC request no svc default

  AAA authentication http LOCAL console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet 192.168.1.0 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd dns 8.8.8.8 8.8.4.4

  dhcpd lease 3000

  !

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd allow inside

  !

  a basic threat threat detection

  host of statistical threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image

  enable SVC

  internal sslwood group policy

  attributes of the strategy of group sslwood

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  internal group woodgroup strategy

  woodgroup group policy attributes

  value of server DNS 8.8.8.8 8.8.4.4

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list woodgroup_splitTunnelAcl_1

  mrkylewood encrypted Q4339wmn1ourxj9X privilege 15 password username

  username mrkylewood attributes

  VPN-group-policy sslwood

  VPN - connections 3

  VPN-tunnel-Protocol svc webvpn

  value of group-lock sslwood

  WebVPN

  SVC request no webvpn default

  tunnel-group woodgroup type remote access

  tunnel-group woodgroup General attributes

  address pool Kyle

  Group Policy - by default-woodgroup

  tunnel-group woodgroup ipsec-attributes

  pre-shared key *.

  type tunnel-group sslwood remote access

  tunnel-group sslwood General-attributes

  address pool Kyle

  authentication-server-group (inside) LOCAL

  authentication-server-group (outside LOCAL)

  Group Policy - by default-sslwood

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  Review the ip options

  type of policy-card inspect dns MY_DNS_INSPECT_MAP

  parameters

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  http https://tools.cisco.com/its/service/...es/DDCEService destination address

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:6fa8db79bcf695080cbdc1159b409360

  : end

  asawood (config) #.

  You also need to add the following:

  WebVPN

  tunnel-group-list activate

  output

  tunnel-group sslwood webvpn-attributes

  activation of the Group sslwood alias

  Let us know if it works.

• Hyperion planning lsoing Essbase connection intermittently

  Hyperion 11.1.2.3.502

  OS - AIX 7.2

  Cluster environment

  Essbase is active/passive

  We are intermittently lose connection essbase and happens very often now

  We have the source of data for all test applications and have no problems

  We are also able to connect to applications using smart

  But when we open the planning form we got following error

  We have replaced the .sec file, but still not a lot of help

  [January 9, 2016 17:21:13]: attribute of loading members... Fact

  [January 9, 2016 17:21:13]: members of the loading scenario... Fact

  [January 9, 2016 17:21:13]: the Base currency of loading members... Fact

  [January 9, 2016 17:21:13]: from create and update Cube... [January 9, 2016 17:21:13]: unable to connect to a Hyperion Essbase.

  Check that Hyperion Essbase is running and check your network connections. [January 9, 2016 17:21:13]: an Exception has occurred when applying

  I setup a new native admin for the planning application and then update a source of app planning data, restart planning and test to see if you get the same question.

  Also, I've seen questions when you have a username called Administrator in the announcement and one in the native user directory, if it isn't the cause to ensure that the user admin, excluded from the configuration of the AD

• Satellite T110-11U: WLan connection dropped and very slow performance

  Hi people,

  I use a Satellite T110-11U running windows 7 Home premium.

  After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

  I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

  Any suggestion or tips to try will help save my sanity!

  Thanks for your help.

  John

  > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
  If you need to make sure that you use the latest WLan driver.
  The driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  The laptop uses the Realtek RTL8191SE of WLan card.
  Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened