Need of GPU for Dell 4600 trying to video in Vegas Movie Studio HD Platinum

Similar Questions

• Need Compatible printer for Dell Inspiron 560

  I wonder if someone can help me please, I tried to work backwards (from my ink) to find a printer for my office with no luck and am at my wits end. I got a HP PSC (printer/scanner/copier) when I got my HP desktop computer, but then I upgraded to my current Dell a few years before and never hang upward my printer I have he didn't need right now. Time passed, and I tried to print, but got an error saying that it has not been installed; I remembered that I never installed on this Dell PC when I unpacked & set up. I soon discovered that it was "not compatible" and of course, that was after (it appears) I had just bought new ink for the printer, so now he is sitting with the new ink (already open so cannot return) and unable to connect to my Dell. I looked everywhere for updates or driver updates etc, but no luck & finally HP told me that there is no way that they are compatible. He uses ink (black & tricolor) #21 & #22 cartridges so now I'm trying to find a printer that is not only compatible with my Dell but that also uses the full/new ink cartridges I have. I'd appreciate any help someone can offer, I can't afford to just buy a new printer on the site for those who work are fine, I just need to get an idea of who will work so then I know what I can get. Thank you!

  I had the impression of working with a driver/support/upgrade download updated os, thank you for your answers.

• Selection of GPU for Dell Inspiron 3847

  I have a Dell Inspiron 3847

  Updated 650 W power supply

  8 GB ram

  Intel i3 processor

  I would like to know some of the GPU, I could use for the games on my rig?

  Unfortunately, the video slot machine is short.12 inches long cards do not physically go in nor be 10 inches long cards.

  I use a Radeon 250th R7.

  http://www.Newegg.com/product/product.aspx?item=N82E16814121800

  With the upgrade PSU and R7 260 X should be fine, as long as it's a short card.

  http://www.Newegg.com/product/product.aspx?item=N82E16814202081

  Power to the comes of power connections PCI-E on the upgraded 650W power supply.  A sovereign plastic will tell you what does or does not fit.  More than 8.5 inches is probably 10 to 12 inches does not work is not physically in.  You can use a plastic rule to see this for yourself.  8.5 inch seems to be Max.

  

• Need product key for Dell

  My Dell Inspiron 3521 OS is damaged. I tried F8, SHIFT F8, etc to reach the advanced startup options to attempt a recovery/regeneration, but they do not work on windows 8. The laptop is stuck in a loop of the Dell bios for the initial startup of windows 8, then happening continuously. Dell technology ran the diagnosis in the bios boot menu and says that there is no hardware problems. I want to reinstall Windows 8 by creating an ISO on my Windows 7 machine boot disk by downloading from Microsoft. Microsoft asks for a product key. Reference Dell tells me it is 'injected' into the bios but I can't boot my machine Win 8. And autour and we will... Help!

  Dell can send you a boot CD for Windows 8.  I helped a colleague last week said that, in a laptop Inspiron so.  I went to support.dell.com, device used their 'chat with a technical support agent' and the agent we sent a CD by mail during the night and we used it the next day.  It was a great service.

• Card GPU for Dell M420 or M620

  Hello

  I'm relatively new to blades and had a few questions re: using expansion mezzanine cards.

  I'm looking at establishing a RDS farm on some Dell spare blades (m420 preference, or even m620s).

  I would like to use remotefx, which as I understand it requires a GPU card. That is available for these blades?

  If there are other aspects to the introduction of these blades?

  See you soon,.

  Huw

  Huwy,

  The only blade that current supports the use of the GPU is the M610x, which is located in the M1000e enclosure. The VRTX blades can support, because the VRTX has the PCI ports on the system board.

  So it is not currently an option to get the GPU card to work on the blades of 2 model.

  Let me know if this helps answer your question.

• Need satellite 4090XCDT - for Windows XP Home edition video card driver

  Hi all

  My apologies if I posted in the wrong section
  I have recently acquired a 4090xcdt and that you have installed Windows XP on it.
  The main problem is that I can not find a suitable driver for the video card. Everything what I can't find is rather varied a lot of win 95/98er. The adapter is a trident cyber 9525dvd any help would be appreciated...
  The group is concerned... Scott
  After searching on the net for the last four hours.

  Hello

  I tried a lot of time in the internet for XP drivers, but without success.
  It seems that graphics drivers XP trident do not exist.

  Unfortunately, in my view, must use the standard XP graphics driver, if you want to use XP on this unit ;(

• Reference Dell 4600 ram upgrade questions

  a crucial site for dell 4600 scanner and ram orderly and upgraded from 256 and added 2 512 sticks.  When I restarted I got a message that the operating system supports no more than 256 MB of ram on a 32 bit...?  Owner's manual says I can go to 1 GB.  Tried to use only the 2 512 taking the 128 (in cracks) but get the same message.  Geek squad checked the ram and agreed it is of the appropriate type, but something may need to be updated in the bios? What to do?

  
  

• Webcam driver for Dell Vostro 3546

  Hello

  I need driver webcam for dell vostro 3546. I can't find in the drivers provided on your Web site.

  My Dell webcam center says NO supported LOAD WEBCAM DRIVER DETECTED.

  Help, please.

  Thank you

  Akanksha

  Hi Akanksha,

  I think you just need to install (or reinstall) the Dell Webcam software to solve your problem.  Here is a link to the Dell Webcam Central support article that will explain the process on how to download and install the software you need.  It seems that you need to connect to My Dell account or sign up for one to access this software because it's a licensed application.

  Let us know once you have reinstalled the Dell Webcam software if you still have problems or not, and if so, we'll see what we can offer you.

  Todd

• y at - he of the driver files for dell dj 20 GB for windows 7

  I need the driver for dell pocket dj for windows files 7

  If Dell does not support in a given operating system, that's between you and Dell.  Microsoft has not made, nor that they would support this product directly.  Or Apple.  Nor is any version of * nix.  Any material support is the manufacturer of the equipment.

  According to the web page compatibility of Windows 7 for this device, it is compatible...  (32-bit both.)

  No matter what support you need you will need to try to get from Dell...
  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=RC956904&l=en&s=HiEd&OS=WW1&OSL=en&SystemID=PDA_MP3_DJ&CATID=-1&impid=-1

  (Since it says it's compatible, my guess is he just gets treated as a hard drive?)

• Audio driver for Dell optiplex gx 620

  I need Audio driver for Dell optiplex gx 620 for windows 7 64 x

  Go to http://www.dell.com, click Support at the top of the page, select support for individuals, then drivers and downloads and finally put the number of serial number of your computer.  Downloads to be there.

• Need software/drivers for the Cam MiniDV DCR-TRV25

  I have owned one of these great little cameras Sony miniDV since 2003 - in fact I love it so much, I bought a 'reserve' on ebay a few months ago.

  The problem is when my laptop crashed, I lost the initial load of the original factory driver for the camera software... and I can't find the original anywhere drive. None of my web searches have found links to reload the driver.

  Even more amazing, I started using Sony Vegas Movie Studio clean - but it plain refuses to import video from his OWN camera - saying that it does not recognize the device.

  What are my options and alternatives for this?

  NC to LB, CA

  Hello. For your computer to recognize the device, if it was recognized before, would mean that either your use of Windows XP or an older operating system. Unfortunately, USB streaming is not supported by Windows Vista, Windows 7 and Mac. But using a different connection: IEEE1394 (i.link or firewire) connection it should work with these operating systems. Going up that probably you just need to install the driver for the camera, you should be able to get it here:

  http://eSupport.Sony.com/us/Perl/SWU-Li... l = DCRTRV25

  Select your operating system from the menu drop down and download and install the device driver (Driver USB for Connection). Make sure that the camcorder is not connected to your computer while installing the driver. Follow the instructions below the USB driver for the login page properly install the driver. Restart the computer and connect the camcorder. Complete the installation of new hardware found. Also make sure that your camcorder USB Stream function is set on IT. Use the application pre-installed Windows Movie Maker or compatible video capture software to capture video to off the Strip. I hope this helps.

• Need Driver for Windows 7 on a Dell Dimension 4600 w / integrated video

  I was looking for a video driver for Windows 7 with no luck.  The I need for the computer is a Dell Dimension 4600 with integrated video.  When I tried the Dell Web site, they show only a driver for XP, because I'm assuming that it was the only BONE the 4600 can run without its standard equipment.  The RAM has been improved to 1.75 GB, so 7 will run on it without any problem, but the only screen resolution that works is 640 x 480.  I tried to go into the advanced settings, the list of all the screen modes, but when I select a higher resolution, reduce it, maximize, and close buttons go black and parts of the screen are becoming blurred.  I tried two different monitors, so I'm sure I just need a driver.  I can't find one that fits.  Any help would be greatly appreciated.  Thank you!!!

  On Saturday, May 15, 2010 01:00:45 + 0000, Jayhawkman wrote:
   
  > I've been looking for a video driver for Windows 7 with no luck. The I need for the computer is a Dell Dimension 4600 with integrated video. When I tried the Dell Web site, they show only a driver for XP, because I'm assuming that it was the only BONE the 4600 can run without its standard equipment. The RAM has been improved to 1.75 GB, so 7 will run on it without any problem, but the only screen resolution that works is 640 x 480. I tried to go into the advanced settings, the list of all the screen modes, but when I select a higher resolution, reduce it, maximize, and close buttons go black and parts of the screen are becoming blurred. I tried two different monitors, so I'm sure I just need a driver. I can't find one that fits. Any help would be greatly appreciated. Thank you!!!
   
   
  Call Dell and ask if the driver you need exist. If they tell you
  they did not create, you're out of luck.
   
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Tried the demotion of the DV9832eo from vista to xp pro... need an idea for drivers

  A friend brought a Pavillion laptop, DV9832eo, asking him to run XP pro instead of the delivered vista system. (seems to me that he must perform certain mathematical impractical software to run under xp, and vista refuses outright to run it).

  so far, the xp installation worked, but I'm coming up short on pilots who will race the sound, graphics (it'll work, but it does not respect the system gpu punch can), card and drive, as well as all the other stuff, they managed to pack in the case of fingerprints.

  I managed to mount the wireless works, but the ethernet cable is also stubborn.

  Anyone has any idea where I might start looking for some drivers?

  as always is the case, it is an urgent job... not all? Well, I told her to go get a coke and a smile, because it would take more than 5 minutes

  But please, if you have any (even vague) ideas where to get a driver xp will eat, pretty please, point me in that direction

  Thanks for your time.

  Drivers Vista for the machine will work under XP for fingerprint Authentec, Modem, card reader, quick launch (volume buttons) and Synaptics:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3717416 & lang = in

  You will also need this software for fingerprint reader:

  BIOSCRYPT VeriSoft Access Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp35501-36000/sp35640.exe

• Need diagram to check the close switch cover for dell inspiron 1525

  Need schematics for Dell Inspiron 1525, check the following points:

  • proximity LCD cover switch
  • cable from the motherboard to the inverter
  • How to check the inverter

  Thank you

  This is the most you can get from Dell

  http://support.us.Dell.com/support/eDOCS/systems/ins1525/en/SM/display.htm#wp1179838

  Complete maintenance manual

  http://support.us.Dell.com/support/eDOCS/systems/ins1525/en/SM/index.htm

• need to know which driver download for dell 1525, or windows vista basic

  need to know which driver download for dell 1525, or windows vista basic

  Dell Inspiron 1525 drivers: http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=INS_PNT_PM_1525&os=WLH&osl=en&catid=&impid=

  Choose your operating system from the drop-down list.

  J W Stuart: http://www.pagestart.com