WiFi not configured

Similar Questions

• ERROR: Windows could implement < name > (ad hoc)... error saying '"windows could not configure wifi'

  I'm not able to create an ad-hoc in my dell windows 7.

  He demonstrated an error saying "'windows could not configure wifi', where wifi is the name of my adhoc network."
  Kindly help.

  Hey Monty,

  What version of Windows 7 are you running?

  Go in Start > run and type winver to know. You must run Windows 7 Home Premium or higher in order to create an ad hoc network. Windows 7 Starter Edition cannot act as a server/host adhoc.

  I suggest you try the steps from the following link on how to create the ad hoc network.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-computer-to-computer-ad-hoc-network
  Also check out the link:

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  Keep us updated with the result once you try the steps above.

• Try to connect to the network, get a msg "the server is not configured for transactions.

  I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

  • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
  • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
  • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

  Can anyone help?

  Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Airport Apple Time Capsule vs Rogers Advanced WiFi Modem Configuration

  Between the use of the advanced WiFi modem from Rogers and airport Time Capsule from Apple - a better/more strong WiFi signal will offer?

  I'm under Apple Airport time Caro as my router now (with Rogers Advanced WiFi modem mode 'bridge').    However - my WiFi connection is weak/inconsistent even after adding 1 Airport Express to extend the network.    My Modem/router are connected with a 2 foot Cat6 my ground floor, with the Airport Express on the floor to extend the reach (via WiFi - not the ethernet connection).

  When I reset my router/modem, get full power - however, after a couple days I get slower speeds.

  Any ideas how to fix?  Users are finding you work better than the other?

  Between the use of the advanced WiFi modem from Rogers and airport Time Capsule from Apple - a better/more strong WiFi signal will offer?

  Turn on the Rogers modem in router mode and launch his wifi... Plug the TC and run it in bridge, but also launch wireless audio... There is absolutely NO reason not to use both... You will often find the 2.4 ghz superior to the airport the Rogers Wireless. Apple has deliberately reduced its speed... If you need set channels wireless manual... for example of Rogers on the TC on Channel 6 and channel 11.

  5 GHz has penetration and poor range, especially when you look at the wireless signal directly above or below any router... It is of course extremely beneficial to use ethernet between the floors... Run the Rogers down and move the TC on the floor... that gives you much better signal allows you to get the most out of two wireless routers.

  Extend (Repeater) wireless using the Express will condemn you slow wireless forever. Repeaters by their nature even halve the speed of the connection... and if you place the Express in a poor signal area... getting worse. Express should be located to midway between the two... no physical distance but the power of the signal... If it gets bad signal, it will give terrible results since its own signal will be strong for customers.

  Test it... give up the Express... run ethernet to the top of the stairs and just try it with the TC to the right place.

• Microsoft Exchange: Microsoft Exchange: "your profile is not configured.

  Hello!

  When I I try to access Microsoft Exchange, I get the error message "your profile is not configured"

  Is there a software fix to profile Exchange recommended?

  Thank you!

  To resolve this issue, mount the store mailbox where the mailbox of the System Attendant service. If you don't want the box attendant service system to be located on the Bank of the current mailbox mailbox, you can move it to another bank of mailboxes on the same server. If it's useless, try Exchange Server difficulty Toolbox.

  She fixed repairs corrupted mailbox request email accounts separately and supports the analysis of very large databases.

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402

• Qosmio X 870 and Windows update 8.1 - secure-Boot is not configured correctly

  After update of windows 8 for windows 8.1 a watermark appeared in the dekstop who says:
  + Windows 8.1 secure Boot is not configured correctly build 9600. +

  Is something wrong with the installation of the update?

  Thank you much in advance.

  I have a Qosmio x-870.

  If you see a message "Secure startup is not configured properly" in the lower right corner of the office, this means that Secure Boot is off or has not been configured correctly on the PC.

  Secure boot can be enabled or disabled in the BIOS.
  You need to access the BIOS and should allow secure boot.
  Save the changes and restart the device.

  Your comments would be appreciated

• SecureBoot is not configured correctly (Windows Pro 8.1 with Media Center)

  I have a HP Pavilion H8 - 1360t purchased July 2012 with Windows 7.  The system has installed UEFI and AMI BIOS v7.09.  I have upgraded to Windows 8, first preview, then the final version.  Yesterday, I upgraded to 8.1.  I now have a watermark bottom right indicating «SecureBoot is not configured correctly...» "and I get activity 2002 of the VerifyHardwareSecurity ' SecureBoot is currently disabled.  Please enable SecureBoot by the system firmware.  I have checked the BIOS and can't find an option to activate SecureBoot.

  HP an article stated that a BIOS version of 8 support SecureBoot but there is no upgrade available for this relatively new machine BIOS.

  Another article warns against upgrading an HP computer preinstalled with Windows 7 to Windows 8 with the following statement:

  " UEFI technology allows a number of improvements in the PC security and performance and is being implemented in all PC pre-installed with Windows 8.". Some PC preinstalled with Windows 7contain UEFI technology and can be modified to provide these features. However the process requires skills and specialist to complete at this time, HP provides instructions to make this change. »

  So the question for HP is: what will be a BIOS level or another solution provided for this modern computer to fully activate the SecureBoot?  I've seen a lot of posts on the forums Microsoft Community of other owners of H8 - 1360T so it's not unique to me.  As a player for Microsoft important material, it is hoped that HP would be sensitive to their customers.  As a customer of long date HP (belonging to two previous HP pavilions - the system is 3rd in the House), I sincerely hope that I have not made a mistake in my material of choice provider.

  Please download and install the update to the BIOS of your system from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61511.exe

  This will restore all the functions BIOS necessary for Windows 8/8.1. After updating the BIOS, go into the BIOS and enable the SecureBoot option. This will stop the message secureboot on Windows 8.1.

  This also enables the BIOS UEFI environment.

• HP dv6 7214tx: windows Setup could not configure windows to run on this hardware

  Hello

  I know it has been posted similar problems before, but I still can't get on my instalation.

  I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".

  My PC is: ENVY dv6 7214tx

  3rd gener. Intel Core i7-3630qm

  processor 2.4 GHz

  1 TB HARD DRIVE

  8192 MB DDR3 SDRAM

  Blu - ray optical drive

  Windows 8

  NVIDIA GeForce graphics card

  WLAN & Bluetooth

  I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.

  What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.

  Do you have any suggestions please?

  Thank you very much

  .. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.

  However, I let it install... I'll see

• I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

  I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

  iOS 9.2.1

  certificate is daily horoscope

  wwhat the devil is and why it has expired?

• ReadyNAS 102 with 6.4.1 alerts not configurable

  Hello

  I have a 102 ReadyNAS, bought two new drives and a factory reset to install readyos 6.4.1.

  Now I can't set up email alerts.

  I enter a new contact and e-mail options complete (server, etc.). After hitting the testmail button, it takes a while and I get the message "testmail could not send." But the email is sent correctly. Under alerts, "e-mail service to send alerts is not configured" is still there. When I hit the reload all my alert settings are lost.

  What's not here?

  I found the problem!

  It comes to IPv6. My email provider seems to have problems with ipv6 in some cases. With a name of dns ipv4-mailserver, it works now.

• Windows 8.1 - secure boot is not configured properly

  Hello everyone. Since I installed Windows RTM 8.1, I kept making a watermark "secure startup is not configured properly" on my machine. The problem is that the secure startup option is enabled in the BIOS (and cannot be changed).

  The problem is that Windows 8 detects that it is not. Any ideas what could be the problem?

  It does not affect my work, but the watermark is very annoying.

  Thanks for the info,

  --

  Robert Iagar

  
  

• Router not configured for port forwarding

  I use a modem wireless to my ISP, they block all ports less than 1024 and I need to forward ports 80 & 440

  How can I solve this?

  If you configure your router for a LenovoEMC Personal Cloud and always see the message, "Not configured router for port forwarding" under personal cloud Configuration, one or more of the following ports are probably blocked by your internet provider (ISP): 80, 443or port selected in the range 50500-50599 .

  Port 80 is used for internet access (HTML UN-secure) in general. If this port is blocked, but the ports 443 and 50500 are open, the Personal Cloud will work correctly even if the error message appears.

  Port 443 is used for remote access on the host network storage device. If this port is blocked, but the port selected in the range 50500 is open, you will be able to use the Personal Cloud LenovoEMC and invite others to use it, but you will not be able to access your network storage device via the Internet URL. (See answer ID 30773 for more information on access remotely through Personal Cloud LenovoEMC.)

  A port in the range of 50500-50599 must be routed through the router to use the function LenovoEMC Personal Cloud. If this port is blocked by your ISP, you will not be able to access the Personal Cloud to your network storage device or invite others to join the Personal Cloud. (For more information, see answer ID 29070 .)

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.