Windows 8.1 - secure boot is not configured properly

Similar Questions

• Secure boot is not configured properly to build 9600

  I've updated my Hp Pavilion g6-2231tx to win 8.1 and it shows on the desktop, Secure boot is not configured correctly. I went through the entire solution and when I went to the computer Setup utility by pressing F10 and configuration of secure boot, legacy support is disabled, but the configuration of secure boot is blocked that is to say, I can't allow it. can anyone help?

  The following has worked for me.

  Had the same problem, that is to say, Secure Boot has been blocked. Clicked on load Factory Default key HP and the Secure Boot option change was authorized. Using the system for the last half hour. No problem yet.

  At the idea of 12 of the Startup Windows 8.1 message subject message. Secure

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-8-1-secure-boot-message/TD-p/3026291/page/2

  It took me all day to fix this. Never realized a simple upgrade would be this frustrating. MS could have tested a bit more before coaxing us to upgrade. I should have waited 6 months before the upgrade for all these wrinkles are ironed out.

• Qosmio X 870 and Windows update 8.1 - secure-Boot is not configured correctly

  After update of windows 8 for windows 8.1 a watermark appeared in the dekstop who says:
  + Windows 8.1 secure Boot is not configured correctly build 9600. +

  Is something wrong with the installation of the update?

  Thank you much in advance.

  I have a Qosmio x-870.

  If you see a message "Secure startup is not configured properly" in the lower right corner of the office, this means that Secure Boot is off or has not been configured correctly on the PC.

  Secure boot can be enabled or disabled in the BIOS.
  You need to access the BIOS and should allow secure boot.
  Save the changes and restart the device.

  Your comments would be appreciated

• Windows 8.1 secure pro Boot is not configured properly

  After the upgrade through shop windows to Windows Pro 8.1, I get the watermark:

  «windows 8.1 secureBoot pro is not configured properly to build 9600»

  I went into the BIOS, tried allowing the secure startup, disabling, restore the factory keys, but nothing has solved the problem.

  The command (windows powershell administrator) Confirm-SecureBootUEFI returns false.

  Any ideas?

  Best regards

  Z.

  I explain how I solved the problem in my Ideapad y510p.

  1 - Press the windows key and the search for "start".

  2 - Click on "change advanced startup options."

  3. in the title of "Advanced boot", click "restart now."

  4 - click "troubleshooting."

  5 - Click on 'Advanced Options '.

  6 - click on "parameters of UEFI firmware.

  At this point, you should see the configuration of the bios/uefi page:

  7 - go to 'security' and then 'reset to installation mode.

  8. then, go to 'leave', then 'exit saving changes.

  Once back in windows, repeat the steps 1 to 6, then in the bios screen:

  -return to 'security' and this time select "restore the keys to the factory.

  -Then go to 'leave', then 'exit saving changes.

  At the next reboot, the problem should be solved, or at least it worked for me. I exclude not only performing the second part of the operation as described is sufficient to solve the problem.

• secure boot is not configured

  error "secure boot is not configured" after the upgrade to windows 8.1... ???

  have you tried that?

  http://go.Microsoft.com/fwlink/p/?LinkId=329932

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• INACCESSIBLE_BOOT_DEVICE on Windows 8 with Secure Boot (Alienware x 51 R2)

  Hello

  I have a desktop R2 of Alienware x 51 and when I first bought it came with Windows 8. Long story short, I decided to install Windows 7 instead and for that I had to disable the secure in the BIOS boot option. Now I decided to install DOS Windows 8 and it worked and everything, but when I turn it back on Secure Boot it gives me a blue screen with the message: inaccessible_boot_device.

  So I don't know what to do here. Basically, what I want is to have Windows 8 on my computer with secure startup, commissioning. I don't mind not duty re - install Windows 8 given that I didn't restore my backups but I always try to solve this problem. Any help would be greatly appreciated.

  Hello

  I re-formatted my computer last night and ended up resolving this issue so I thought I would update this matter with my solution.

  Basically, I followed this guide:

  www.eightforums.com/.../38486-need-help-formatted-genuine-Windows-8-Lenovo.html

  With the help of the media Windows Installation tool, I was able to install Windows 8.1 Secure Boot with UEFI active. Please note that I used a USB Flash drive and not a DVD, apparently, it makes the whole process better somehow.

  Thank you for your help and time of Milena and Naomi!

• For Windows XP (KB2686509) security update will not install

  I've got 5 responses within 24 hours with the same question - after download from Microsoft Update for Windows XP (KB2686509) security update will not install - be what I need to do? Microsoft will pay attention and come up with a solution?  Anyone know how to reach and motivate the MS to help?

  See:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• This application is not configured properly, maybe you should try to reinstall

  This application is not configured properly, maybe you should try to reinstall. He says this even if it was just installed, or was not yet installed. How can I fix it? His allusion to a Bethesda game. But I think that the issue is much more than that

  I activated the AutoPlay on the hard drive and I don't really see a problem that I know in the event viewer. When I try to run the game, it appears every time.

  And Bethesda support said what?

  And try to be more comprehensive and coherent when you ask them.  In other words, identify the game, explain what you mean by "it was just installed or is not installed", and why you "think that the problem is much more than that."  What do you think is the problem?

  Whatever that allows automatic reading has to do with your problem?  Why you mention it?

  What errors or warnings are displayed in the event viewer, even if they do not seem to be a problem for you?

  Be sure to identify the version of Windows you have, including service pack.

  Complete without paraphrase error messages display also allows to diagnose problems.

  Finally, try to uninstall the application using the control panel > Add / Remove programs.  Then use Free Revo Uninstaller to remove remnants of the disenfranchised.  Then run Disk Cleanup (start > run > cleanmgr.exe > OK) and restart the computer before you try to reinstall.

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• Cannot boot from CD - DVD in LEGACY mode - NO Secure Boot UEFI NOT

  You just bought an Optiplex 7010 minitower with Win 8 Pro 64 - bit, 8 GB of RAM, 500 GB HDD and an Intel i5 processor 3470.  Now he has BIOS version A16.

  It is normally ON UEFI and Secure Boot on IT and F12 at startup does NOT normally display the CD-DVD as a boot option.  OK - no problem.

  However, if I reboot with F12 and select UEFI OFF (meaning WE legacy) and Secure Boot SHUTDOWN and reboot, then F12 DON'T show me the CD - DVD as a startup option, but if I actually try to boot from a bootable CD, I get an error message.

  I practiced with two CD bootable - a Knoppix I did on a XP machine an Aomei Backupper I did on a Win 7 machine.  These CD working as in my old XP machine boot CD, and the CD of Backupper of Aomei worked someone else machine Win 7 Pro 64 bit.

  What's wrong?

  Again, please let me repeat that I am trying to boot from the CD-DVD AFTER I have turned OFF UEFI, turned on the legacy and off Secure Boot.

  Thank you.

  Speed - although you predicted, I am amazed at what I did today.

  I bought a second hard drive (in white) and installed Win 7 Pro 64 - bit SP1 on it.  (I unplugged the first hard drive which has my Win 8 Pro 64-bit.  (Later to figure out how to dual-boot - no not yet for that.)

  What struck me is that I have installed SP1 for Win 7 Pro 64-bit while my BIOS is UEFI - it's ON UEFI and Secure Boot off.  (Enable Legacy ROM is enabled.)  BIOS is the Windows Boot Manager.  The Win 7 Pro 64 - bit SP1 DVD ran perfectly on my CD - DVD unit - no problems of any kind.  The machine has restarted several times, as I adjusted it settings and added the resource of Dell Media CD drivers.

  Disk Management displays only two partitions - a little with the legend "Healthy (EFI System Partition)" and then my C:\ drive, which is indicated be NTFS and 'in good condition (boot, Page File, crash dump, primary Partition).  The properties for the entire drive 0 said "Partition Style: GUID Partition Table (GPT).

  Now - is it good or bad?  If one day I try to dual-boot, what is incompatible with the four partitions on my hard drive to win 8 (now offline)?  Install this fake Win 7?

  I'm even more amazed than the Win 7 Pro 64 - bit auto installed SP1 with a product key that is different from the product key for my Win 8 Pro 64-bit.  The Dell OEM Windows 7 installation disc done by himself - I don't have to enter anything.  Which is good news for a future dual-boot, Yes?

  I have NOT yet connected to the internet.

  Now, when I unplugged my hard drive of origin WIn 8, I disconnected the Sata data cable and used for the new hard drive Win 7 added.  If the new hard drive is connected to data SATA motherboard even as the drive of origin 8 Win.  Well, at some point when I use two hard drives, one of them should be connected to another plug SATA on the MB - but not yet.

  Well... How do I fortunately to this stage so far?

• Windows Firewall and Security Center will not start, error 1068 and 1079

  I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

  I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

  Help, please!

  The other post:

  I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

  No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

  WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

  A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

  My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

  The system cannot find the specified file.

  http://support.Microsoft.com/kb/947821>

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

  UTC/GMT is 02:51 Wednesday, April 25, 2012

• Error code: 80070005 (updates are not configured properly)

  I am experiencing infinite loop "updates were not correctly configured.  Returning from the changes. "Windows Update poster 11 updates did not include KB 2183461, 982665, 980436, 981997, 2160329, 982799, 983589, 981852, 982664, 2079403 and 982214.  I tried to install manually via the download section.  It has not yet.  The error code is 80070005.

  Hi Dwsamee,
   
  1. who is the edition of Windows that is installed on the computer?
   
  Try these steps and check the result.

  Step 1: Uninstall the security software

  a. see Uninstall or change a program

  b. once the security software is uninstalled, restart the computer.

  Very Important: Be sure to reinstall the security software after installing Windows updates.

   

  Step 2: Download and install the update for your Windows system preparation tool

  a. see http://support.microsoft.com/kb/947821

  b. download the good update for your Windows and install it successfully.

  c. restart the computer so that the changes take effect.

   

  Step 3: Install updates

  a. connect to the computer as an administrator.

  b. Click Start, type Windows Update, click Windows Update.

  c. install the updates one by one.

  d. restart the computer after each update is installed.

   

  See Updates Windows Installer

   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402