WiFi signal is weak on razr maxx

Similar Questions

• given that I have installed 9.3.1 IOS wifi signal is weak or lost.

  given that I have installed 9.3.1 IOS wifi signal is weak or lost. I have an IPhone 6 64 GB. Help, please!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Weak WIFI signal

  Hi, am currently using an HP Pavilion 2307tx g6 but get really weak wifi signal in my room. Only able to get about 2-3 bars every time while my other laptop can go up to full bars.

  Any help/solution would be greatly appreciated!

  Welcome to the HP Forum, Rascal.

  Discussion on the theme of the power of the Signal

  Buffaloes by themselves may be a little empty of meaning, UNLESS you can interpret the definition of what each 'bar' says.

  Signals are affected by the type of router you have - routers are NOT equal.

  • The cheapest router can not not the support required for the performance of your computer's wireless card.

  Example: An older router that only supports 802.11 g will not provide faster than 54Mbps - even if you have the best card you can buy in your computer.

  • The opposite can be true as well - a good router cannot provide a better service than the computer's wireless can support.

  Example: If the card in your computer is 802.11 g, so even if you have a router capable of speeds of more than 300 Mbps, you can get only 54 Mbps.

  Speed and autonomy are limited by the link in the chain.

  • 802.11n is faster than the 'g', but it can also be slowed by the walls, the furniture in metal and other obstructions.
  • Move your equipment, even a few inches, could make the difference to a router 802.11 g

  AND

  • The same might be true for a 802.11n router that has a small antenna (low power)
  • Antennas in routers are NOT equal.  Small antennas in routers fantasies can still match a whimpy router.  You want a router with a 5db antenna 7db (or better if they make these by the time you read this).

  Assuming you bought the biggest, baddest, best wireless available for your computer, then you may need to upgrade your router.

  Strength vs. Signal bars

  Bars can indicate how things are moving along, or they can cloud the issue - depends on the "bars": which generates the bars, the sensitivity are the bars and you can do a lot in a bar anyway?

  You can use another measure: the traction measured in percentages, detection and Signal type:

  WirelessNetView v1.50 - wireless network monitoring tool

  WirelessNetView works on Windows 7 and Windows 8 - there are a few problems with XP: read reviews of the author.

  ---------------------------------------------------------------------------------------------------------------------------

  You can try to update / reinstall your Wireless driver.  Help - can be a waste of time.  If you have already done, this new fact will not help - so I don't recommend it.

  Reading:

  Laptops - troubleshooting Internet or email connection on a wireless network with Windows 7

  Windows 8 stops responding or becomes very slow after you connect to the Internet

  Reference:

  Description 802.11n 802. 11-802.11 g

  Date approved	June 2010	2001	2003
  Frequency band	2.4 GHz	5.0 GHz	2.4 GHz
  Speed	100 - 200 Mbit/s	Up to 54 Mbps *.	Up to 54 Mbps
  Estimate 128Mbps	Estimate 128Mbps	27 Mbps	20 to 25 Mbps
  Range 1	range of 230 ft	range of 60 feet	100 ft range
  Modulation technique	Multiple input multiple output (MIMO multiple) and channel-bonding/40 MHz	Orthogonal Frequency Division Multiplexing (OFDM)	Spread Spectrum (DSSS/PBCC)
  Interference problems		Less interference than 802. 11 b or g	Increased interference (mobile phones, microwave ovens, ovens, etc.).
  Maturity of the product	Official specification will be finalized in June 2010		Official, final specification in June 2003
  Distance between Access Points		About every 50 ft	Depends on configuration
  Biggest advantage	More high speed and battery life	Higher speed	Top speed coupled with 802. 11B compatibility

  Help, Suggestions and examples:

  Parameters to improve wireless connectivity

  Articles, various, including:

  • The power of WiFi management
  • Laptop wireless hesitates or don't stay connected when executing a stack

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Satellite L50-B-1N8 - weak wifi signal

  Hello

  So two weeks ago, I bought a new laptop of Toshiba Satellite L50-B-1N8 of Argos.

  He never had too good a force wifi signal (bars never complete - even when sitting next to the wifi router) but I thought it was due to my wifi box and possibly the time of garbage that we had.

  However, I still have my old laptop, and when you check the WiFi side by side, my old portable Samsug picked up the signal full or almost full so this new Toshiba picked up a bar at a push.

  Since then, I took the laptop to my parents and he struggles to get the good WiFi, if no signal there too.

  It's super frustrating because it get wifi, it get just a very weak signal or nothing at all, and as soon as I move my laptop... literally a few centimetres, it will change the wifi signal or my wifi signal is cut and it will be impossible to connect.

  I did everything I can think of troubleshooting to actually factory reset my laptop that none has worked so far. The factory reset seems to have actually done worse, rather better!

  As I said, my router is not the problem here, I have my old laptop that connects very well, as well as two other laptops and mobile devices that all have connected to wifi very well and with full signal!

  I disabled all these wifi devices to see if this is the problem, but that did not help or the other. I also have a booster of wifi in the House, so all devices have full or almost full signal, but it seems of no use for this Toshiba.

  I lose my home, is there anything else I can do? I'm still in the warranty of 30 days of Argos if the laptop is down, but I just can't think of anything to try. I just hope that if the laptop is down Argos will help and either pay the phone or Exchange.

  Any help or advice would be much appreciated. :)

  I think first of all you must check if the wireless performance question isn't related to energy saving settings.

  Go to the control panel? Windows power options.
  Choose the current power plan
  Now, you must click Advanced power settings.

  In Advanced Power settings you will find different options, search for LAN wireless (WiFi) and choose the Performance for both options (battery and power)
  After that, restart the device.

  I hope that this short change might help you.

• Very weak WIFI signal on Satellite Pro L10

  Hello

  I have a Sat Pro L10 delivered without a mini pci wireless card so I bought and installed an and is equipped with an internal antenna behind the screen. When I'm in the same room as the router I have a brilliant connection but as soon as I leave the room I lose all together. The router is fine as the other people have no problem connecting to this. The card I bought made by Agere but is marked as Toshiba, I updated the driver to the most recent I could find which is June 2002.

  Any help on this would be greatly appreciated as I'm tired of dragging this wire around with me.

  Hello

  I think that there is not much to do. I think that the environment has a strong influence on the Wlan signal reception. It of the same question as yours.
  My brother uses the WiFi network at home and the signal is strong enough if it is in the same room but in other parts, the signal is very weak. But at home it can receive WiFi signals without any problem. The signal is strong, also if it is in different rooms

  I think that the walls of the room are the reason for the weakness of the signal.

  But you can see the Wlan card properties in Device Manager. There you can change some settings in the Advanced tab. For example, to disable energy saving, etc.

• G4 HP 250: very weak wifi signal

  today I bought hp 250 g4 with no windows installed .i 10 operating system but I have a very low two meters from the router wifi signal.im and I do not get signal.i must get exacly near router to get 2-3 bars. I plugged a USB wifi adapter, I had and I have updated and acticated windows and then I rebooted the laptop and removed the usb adapter and internal wifi adapter has always weak signal

  Hello:

  If your laptop computer is the Broadcom wireless network adapter, see if the installation of the last driver W10 wireless for this model of card solves the problem.

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  File name: sp75249.exe

• Pavilion p283tx: Hp Pavilion p283tx 15 very weak Wifi signals

  Hello

  I'm new to the forums of HP. I have a problem with my new HP Pavilion 15 p283tx notebook. I use Windows 10 pro 64 bit and affected by very low wifi signal. It shows me only a single connection with 2 maximum signal bars. I installed the latest drivers and tried every fix available on the web. Please someone help me.  

  Kind regards
  Suhail Huzafa

  Thank you very much for your answer. But I solved this problem by updating my driver in Device Manager. Downloaded Device Manager driver automatically in the web, and then everything works fine. Thank you for your response. Sorry for the late response due to the busy schedule of studies.

• My dilemma - should keep the K1 despite the intensity of the weak wifi signal?

  So here's my story:

  I bought Lenovo K1 for many during the period of holiday Office Depot for $299. It was worn and really poor wifi signal strength. I wanted to Exchange, but Office Depot informed me that the K1 had been abandoned, so they gave me a refund. I was really sold on the K1 and thought maybe it was just my camera, so I ended up buying a new K1 on Amazon for about $350. I ran all the updates and I am now on the latest version of the software. Unfortunately, the new tab is range and low resistance. It is little matter where I am. I used it at home, in my office, at the in-laws, and the signal strength is low.

  Here's what I've done so far:

  -J' tried to leaving my router settings, based on the reading of the various recommendations of various forums-still no luck. (However, still would not help if I'm out and about.)

  -J' I download and run Wifi Analyzer, I normally vary between 65-75 dBm while standing within 8 to 20 feet from the router. (Comparable to my HTC Evo, but 15-20 dBM below my laptop at the same place).

  -J' used the speed Test from Ookla app - around 5 Mbps down to 2.5 (my colleague was getting up at the same place on his ipad around 20 Mbit/s down and 10Mbps).

  I'm at a crossroads now - I really, really like the K1 for most. It was a very good price, I really don't want to spend over $ 400 on a tablet. But since a lot of my use requires internet connection, is it worth keeping?

  Or should I just go back, put my money and wait for the Lenovo S1 Tablet out in June-July.

  Any comments would be much appreciated!

  For what it's worth, my K1 Gets the same results as my Nook Tablet - 12 down and 2-up on TW at home.

  Edit: got 18/2 this morning, same place. TW to blame for the lack of consistency.

• new hp pavilion g7 1318dx windows 7 64 bit weak wifi signal and slow speed internet

  I just bought my laptop rent to own the first thing I did to it was regester with hp then I went to the support of hp and updated the computer Wizard laptop, then update from windows to the low load of google chrome and flash player from adobe updated who was already installed the 32-bit version installed java script 32 bit recommeded why 32 bits on 64-bit system is beyond me. It doesn't matter which browser I use chrome or internet exploerer are long to load. my wifi signal status since I turned on the laptop for the first time and after the updates is 7.5 Mbps to 14.5mbps, he jumps back it's the highest I've seen the signal to go. impulling signal of motel, I live in the purchesed just owner a new router n wireless apple and he gave me all the info to set up my network wireless like hers. number of my comes from time to time with his laptop HP dv6t and pulls 65mbps and doesnthave problems with slow internet speed at all. I have a linksys usb flash drive, I tried to connect it to the laptop and it will not discover the devices & printers or say what plug the new found hardawre. I works great on laptops from friends and my office. I have read many reviews on laptops the g7 1318dx seen where few people have had similar problems and I have the same wifi card they had realtec 8188ce 802.1 b/g/n wifi adapter wireless lan network conn. My question is how can I solve this problem goes.  help or the solution of the appriciated grately forum thanks a lot. goldberg1960

  Hi goldberg1960,

  Take a look at this document and follow the steps in the section "connections wireless slow or abandoned." Please let me know if this helps solve your problem.

• HP laptop: scope and the wifi signal strength

  very very weak signal wifi and range signL force is very low, even I'm sitting near router I try every thing but not solve issue please help I use window 8 pro

  HI @vickysaeed,

  Welcome to the HP Forum! Is a great site to find information, tips and suggestions. You have the most rewarding experience please consult the HP Guide's Forums. First time here? Learn how Post and more what is your exact model of HP laptop?  Computers laptops HP - how can I find my model number, serial number or product? What operating system do you use?

  I understand that your wireless network has a short range of signal and the signal is weak, even if you sit close to the router. Even if you've tried a few troubleshooting you have not been able to overcome this difficulty. Assuming that you are running Windows, have you checked the updates? You ran the Windows troubleshooting tool? Did you run the HP Support Assistant?  Please read this post on the @Greatforum - Deku Tree as it should help. Commons fixes for wireless connectivity problems Please keep me updated on your progress.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• Why my MB Air decreases the wifi signal

  My 2012 13 "core i5 MacBook Air running different operating systems will remove the wifi signal and it is getting worse. someone at - it a reason why?

  How your MacBook Air running different OS version? However, the Wi - Fi signal fell to each version?

  This always was a problem or just started to happen? Up to now, what did you do to try to solve?

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• iPhone 6s cannot detect Canon camera wifi signal

  6 s iPhone, OS 9.3.2. This phone cannot detect any Canon EOS 6 d wifi signal after that I turned on the wifi of the camera. My previous phone iPhone 6 has been able to detect it.

  You can try the following steps

  On your Canon 6 d:

  1. go to WiFi settings

  2. turn on your Wifi

  3. go to the WiFI function

  4. Enter your nickname

  5. Select connect to the smartphone

  6. Choose mode camera access point

  7. Select easy connection and then you will get key SSID & encryption

  On your iPhone 6s:

  Download this app https://itunes.apple.com/us/app/eos-remote/id565839396?mt=8

  1. turn on your WiFi

  2. choose your camera WiFi

  3. Enter the password (the password = camera encryption key)

• Airport express to extend my wifi signal

  I bought and set up the Airport express to extend a wifi signal in my house. I do not have an airport extreme as a base station - I thought I could use the express to extend the signal from my router/modem from verizon. Is this possible?

  Turned it "on" now, I don't see the express network as an option in my combo network - so assuming that it will seek to expand, what's the problem with it only shows not not in the drop-down list?

  The AirPort Express only wireless may extend over a network that is provided by another router from Apple.  As such, it cannot extend wireless signal router left 3rd.

  Another way of saying the same thing, it's that if you want to extend wireless network using a router from Apple, you will need two routers Apple.

  If you can connect the AirPort Express Terminal to your main router using a wired Ethernet cable connection, permanent, then the Express can be configured to provide additional coverage of wireless signal in this way.

• What can I do to make my wifi signal is getting better?

  What can I do to make my better wifi signal?

  The distance is the problem more obvious - there is a certain optimal range that the wireless signal can travel. If the network is covering an area larger than the router is able to transmit, or if there is a lot of corners for everyone and walls to penetrate, performance will take a hit. Interference is also a big problem, especially for those living in densely populated areas. Signals from other wireless networks and electronics can impact speeds, that can the physical obstacles, such as walls.

  You can always look at your router administrator interface to see how many devices are connected. Or use a network Analyzer to see if you have unknown machines on your network. If it is a network that is open, close it. Configure security - preference WPA2, WEP is not as strong and put in a password that is difficult for others to guess.