Wildcard to attribute LDAP - IPSEC not WebVPN

Similar Questions

• Attribute LDAP AnyConnect Map

  I'm trying to configure the attribute map for our SSL Anyconnect Client connections. Basically I want all connections to be deleted, unless the AD attribute numbering is set to allow users.

  I have it working. But according to the instructions of Cisco, you create a group policy for NoAccess as your default strategy for your connection profile and kinematics-connections set to 0. The idea being to all connections will be dropped unless they use a different group strategy. As soon as I change my strategy of group - by default-NoAccess, I can not connect.

  ldap attribute-map LDAPVPN
  
        map-name  msNPAllowDialin IETF-Radius-Class
  
        map-value msNPAllowDialin FALSE NOACCESS
  
        map-value msNPAllowDialin TRUE SSL-VPN
  
  aaa-server LDAP protocol ldap
  
      aaa-server LDAP (inside) host 192.200.202.5
  
      server-port 389
  
      ldap-base-dn dc=*****,dc=com
  
      ldap-scope subtree
  
      ldap-naming-attribute sAMAccountName
  
      ldap-login-password *****
  
      ldap-login-dn CN=cisco,OU=Service,OU=Accounts,OU=*****,DC=******,DC=com
  
      server-type microsoft
  
      ldap-attribute-map LDAPVPN
  group-policy SSL-VPN internal
  
      group-policy SSL-VPN attributes
  
      dns-server value 192.200.202.5 192.200.202.6
  
      vpn-tunnel-protocol svc
  
      split-tunnel-policy tunnelspecified
  
      split-tunnel-network-list value VPN-Tunnel
  
      group-policy NoAccess internal
  
      group-policy NoAccess attributes
  
      vpn-simultaneous-logins 0
  
      vpn-tunnel-protocol IPSec svc
  
      webvpn
  
        svc ask none default svc
  tunnel-group SSL-VPN type remote-access
  
      tunnel-group SSL-VPN general-attributes
  
      address-pool ssl-pool
  
      authentication-server-group LDAP
  
      default-group-policy NoAccess
  
      tunnel-group SSL-VPN webvpn-attributes
  
      group-alias ******* enable
  

   If I check debug you can see the attribute being mapped correctly. What gives?
  
      

  test aaa authorization LDAP host 192.200.202.5 username ****
  
  [333]   msNPAllowDialin: value = TRUE
  
      [333]           mapped to IETF-Radius-Class: value = SSL-VPN
  
      [333]           mapped to LDAP-Class: value = SSL-VPN
  
  
   
   
  			 
  Hello, please follow these steps:
  attributes of SSL - VPN group policy
  VPN - connections 3
  What is happening here is that the SSL - VPN group policy inherits the value 0 of concurrent vpn connections to NoAccess policy as soon as set you it uo as default group policy under the tunnel-group. That's why we need to specifically add value on SSL - VPN group policy.
  		   

• How can I get rid of the follow-up? {Attribute Java Script] = not in XMI. Now I have to click ok which is a nuisance

  How can I get rid of the follow-up? {Attribute Java Script] = not in XMI. Now I have to click ok so he can disappear, that is a montage of nuisance. How can I get the missing part?

  Thank you. Then I disabled all extensions one both enabled and found that productivity Community Toolbar 3 seems to be the culprit. I will be a while before I close the file. Thank you.

• Image of the attribute: file is not found in the list of the packaged files:

  When Build in Webworks already, I still have the following 2 lines in the config.xml file, but it said ' image of the attribute: file is not found in the list of the packaged files.

  
   

  My full config.xml:

  
  "xmlns ="http://www.w3.org/ns/widgets "
  xmlns:CDV ="http://cordova.apache.org/ns/1.0" > "
    CarlogPro
    Service and gas logs
    http://Cordova.IO "> XpertLulu"
   
   
   
   
    subdomains of http://xpertlulu.com"="true"/ >
   
   
  

  Need help!

  Nevermind, I've upgraded v2.0.0.54 to v2.0.0.71 Webworks and it worked.

• oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058: lastpaiddt definition of the attribute type is not found in LoanUpdateVO1

  Hello

  I created a based EO VO in which a column is recovering value per query:

  VO request is:

  SELECT principalEO.LOAN_ID,

  principalEO.LOAN_NUM,

  principalEO.DESCRIPTION,

  principalEO.FROM_DT,

  principalEO.TO_DT,

  principalEO.COMP_ID,

  principalEO.COMPANY_NAME,

  principalEO.PROJECT_ID,

  principalEO.PROJECT_CODE,

  principalEO.PROJECT_NAME,

  principalEO.LOAN_AMT,

  principalEO.LOAN_SANCTIONED_AMT,

  principalEO.LOAN_DISBURS_AMT,

  principalEO.LOAN_PROCESSING_CHARGES,

  principalEO.INTERST_RATE,

  principalEO.INTEREST_AMT,

  principalEO.PRINCIPLE_REPAYMENT,

  principalEO.TDS_RATES,

  principalEO.SYNDICATION_FEES,

  principalEO.SYNDICATION_PAID_TO,

  principalEO.VENDOR_ID,

  principalEO.VENDOR_NAME,

  principalEO.VENDOR_SITE,

  principalEO.INSTITUTION_TYPE,

  principalEO.LOAN_TERM,

  principalEO.LOAN_TYPE,

  principalEO.SECURITY_DET,

  principalEO.REMARKS,

  principalEO.INVOICE_FLAG,

  principalEO.EMI_DATE,

  principalEO.DISBURS_DATE,

  principalEO.ATTRIBUTE4,

  principalEO.ATTRIBUTE5,

  principalEO.CREATED_BY,

  principalEO.CREATION_DATE,

  principalEO.LAST_UPDATE_DATE,

  principalEO.LAST_UPDATED_BY,

  principalEO.LAST_UPDATE_LOGIN,

  principalEO.EMI_AMT,

  principalEO.EMI_AFTER_MONTH,

  (select from_dt in the omx_sec_loan_repay where loan_num = principalEO.Loan_num and paid_amt is null and rownum = 1) AS LAST_PAYMENT_DT

  OF OMX_SEC_LOAN_PRINCIPAL principalEO

  now I have to apply validation, from date should not be before Last_payment_dt

  Controller code I've written is:

  If (pageContext.getParameter ("updateloan")! = null)

  {

  String LoanNum = (String) pageContext.getParameter ("LoanNum");

  OAViewObject vo = (OAViewObject) am.findViewObject ("LoanUpdateVO1");

  Line OARow = (OARow) vo.getCurrentRow ();

  Date FromDt = (Date) row.getAttribute ("FromDt");

  System.out.println ("date is:" + FromDt);

  Date lastpaiddt = (Date) row.getAttribute ("lastpaiddt");

  System.out.println ("date is:" + lastpaiddt);

  }

  When I turn the page, error:

  oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058: lastpaiddt definition of the attribute type is not found in LoanUpdateVO1

  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException (unknown Source)

  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors (unknown Source)

  at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest (unknown Source)

  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)

  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)

  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)

  at _OA._jspService(_OA.java:71)

  When I give another deposited instead of lastpaiddt, it works fine...

  Hello

  Looks like the attribute is missing, can you check if the attribute named "lastpaiddt" exists under LoanUpdateVO1?

  Right-click on LoanUpdateVO1 - > properties - > list of attributes - > and check if the missing attribute exists

  Kind regards

  Had

• IPSEC not Pkts on Cisco ASA

  Hi, please I need a help.

  I have an IPSEC tunnel with my Cisco ASA and a PFsense Peer, VPN is to include phase 2.

  But I could not send pkts on this VPN.

  My internal network - 10.2.0.0/17, 172.31.2.2/32 customer network

  ==========================

  FW - counterpart of the ipsec VPN - 01 # sho 177.154.83.34
  address of the peers: 177.154.83.34
  Tag crypto map: outside_map0, seq num: 4, local addr: 200.243.146.20

  access extensive list ip 10.2.0.0 outside_cryptomap_8 allow 255.255.128.0 host 172.31.2.2
  local ident (addr, mask, prot, port): (10.2.0.0/255.255.128.0/0/0)
  Remote ident (addr, mask, prot, port): (172.31.2.2/255.255.255.255/0/0)
  current_peer: 177.154.83.34

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
        #pkts decaps: 2957, #pkts decrypt: 2957, #pkts check: 2957
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
  success #frag before: 0, failures before #frag: 0, #fragments created: 0
  Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
  #send errors: 0, #recv errors: 1

  local crypto endpt. : 200.243.146.20/0, remote Start crypto. : 177.154.83.34/0
  Path mtu 1500, fresh ipsec generals 74, media, mtu 1500
  current outbound SPI: C1A13463
  current inbound SPI: 5B6B0EAB

  SAS of the esp on arrival:
  SPI: 0x5B6B0EAB (1533742763)
  transform: aes-256-esp esp-sha-hmac no compression
  running parameters = {L2L, Tunnel, PFS 2 group}
  slot: 0, id_conn: 9179136, crypto-card: outside_map0
  calendar of his: service life remaining key (s): 858
  Size IV: 16 bytes
  support for replay detection: Y
  Anti-replay bitmap:
  0xFFFFFFFF to 0xFFFFFFFF
  outgoing esp sas:
  SPI: 0xC1A13463 (3248567395)
  transform: aes-256-esp esp-sha-hmac no compression
  running parameters = {L2L, Tunnel, PFS 2 group}
  slot: 0, id_conn: 9179136, crypto-card: outside_map0
  calendar of his: service life remaining key (s): 858
  Size IV: 16 bytes
  support for replay detection: Y
  Anti-replay bitmap:
  0x00000000 0x00000001

  ===========================

  Entry packet - trace FW-VPN-01 # outside icmp 10.2.110.10 1 172.31.2.2 0

  Phase: 1
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  in 0.0.0.0 0.0.0.0 outdoors

  Phase: 2
  Type: ACCESS-LIST
  Subtype:
  Result: DECLINE
  Config:
  Implicit rule
  Additional information:

  Result:
  input interface: outdoors
  entry status: to the top
  entry-line-status: to the top
  output interface: outside
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: flow (acl-drop) is denied by the configured rule

  ===============================

  FW-VPN-01 # sho running-config | 177.154.83.34 Inc.
  outside_map0 card crypto 4 peers set 177.154.83.34
  internal GroupPolicy_177.154.83.34 group strategy
  attributes of Group Policy GroupPolicy_177.154.83.34
  tunnel-group 177.154.83.34 type ipsec-l2l
  tunnel-group 177.154.83.34 general-attributes
  Group - default policy - GroupPolicy_177.154.83.34
  IPSec-attributes tunnel-group 177.154.83.34

  ==============================

  FW-VPN-01 # sho running-config | 172.31.2.2 Inc.
  network 172.31.2.2_32 object
  Home 172.31.2.2
  access-list sheep extended 10.2.0.0 ip allow 255.255.128.0 host 172.31.2.2
  access extensive list ip 10.2.0.0 inside_access_in allow 255.255.128.0 object 172.31.2.2_32
  permit access list extended ip object 10.2.0.0_17 object 172.31.2.2_32 outside_cryptomap_5
  permit access list extended ip object 10.2.0.0_17 object 172.31.2.2_32 outside_cryptomap_8
  NAT (inside, all) source 10.2.0.0_17 destination 10.2.0.0_17 static static 172.31.2.2_32 172.31.2.2_32 non-proxy-arp-search to itinerary

  so you see the packets traverse your inside interface but no response back. Please check if you have a route to 172.31.2.2 host in your internal network pointing traffic to the ASA.

  the package shows plotter drop because you run of out-of-in and in this case, you must specifically that traffic on the acl allow external interface. When the real traffic arrives through vpn, it checks for sysopt and then the interface access list is bypassed. but when you do a package tracer, simulated package does not in reality of vpn and therefore we have that allow outside interface acl for package tarcer to enable.

• ASA LDAP is not find memberOf Active Directory domain users group

  It seems that any group I have add an account for the ldap memberOf thinks it is except for the domain users group. Is there a specific exclusion of this group somewhere? It does not seem to be a problem with space in name, because if I test it with other default groups like domain administrators, it works. I get the same result of the ldap attribute card as long as you try to use the domain users group in a DAP policy. Debugging ldap 255 returns every other group membership for an account with the exception of users in the domain.

  When I run the command "sh filter LDAP ad 'Domain' group ' is the domain users group in the list of results, so he is able to see it and it exists."

  Please see the attached link under primaryGroupID, which states that the Domain Users group is not part of the memberOf attribute. http://msdn.microsoft.com/en-us/library/ms677943.aspx That explains why the mapping fails for any Domain Users as seen in the debugs

• Reconciliation of LDAP - do not reconcile all accounts

  Hello

  I have a problem with the LDAP - IOM (ver. 11.1.2.2.0) reconciliation is not read all the accounts of the connected application instance. There are 10,000 + our LDAP user, but during reconciliation 170 is read only in IOM (these are reconciled properly). I use the OID (11.1.1.6.0) connector and the LDAP protocol is ODSEE. According to the docs of connector, it have two jobs for users of reconciliation (the system of target, not the reliable source view mode):

  • Search the LDAP reconciliation connector user - this should be the full reconciliation when used without ' last token and 'Filter' values - but reconciles the accounts as 170.»
  • Connector LDAP User Sync reconciliation - this forum works only when the Changelog plugin in ODSEE is enabled (I tried to do turn on, work performance and fineshed with success status, but the result was not the reconciliation of all accounts)

  I can't find any relevant info in the newspapers what could cause this behavior. Do you have any idea how to do this?

  Best regards

  Peter

  Hello

  I was able to determine what the problem is and I am tracking solution for future reference.

  This problem was caused by the configuration error in the value of the attribute "accountObjectClasses" (Lookup.LDAP.Configuration) - custom identifiers in the "accountObjectClasses" in the configuration of the IOM, which caused that accounts LDAP without all the object mentioned in the 'accountObjectClasses' value classes have been ignored by the reconciliation there.

• Sync LDAP is not updated any modification/deletion?

  In our environment, we have IOM 11.1.1.3 and we have activated with the OID LDAP synchronization. Any user created on IOM's get synchronized OID. The problem is when we make changes to the attributes of the users or the deletion of a user of the change are not get reflected back to OID. If anyone can help or give appropriate pointers or advice so that we can have a fully functional synchronization?

  When you delete a user, they get only disabled.  There is a task called "delayed delete user ' which will remove depending on the value of the value of system configuration 'period of delay user delete '.  Try to set this to 0 and then execution of the scheduled task to see if it removes.

  For attributes are not reflected, check the/db/LDAPUser file to see if mappings exist for the attributes that you are editing.  In R1, there is the script I mentioned in this post, https://forums.oracle.com/message/10354064, to add and remove mappings.

  -Kevin

• Model IPSEC not no projection in web registration

  Nice day

  I have an edition of Windows 2003 R2 Server Standard with a turnover of the company and is an AD DC. My question is... the model of IPEC is not in the drop-down list of web registration.

  The IPSEC model has all the permissions in the Security tab for full control Domain Admins.

  Reason, I need the model IPSEC is that I am creating a site to site ASA VPN using the IKEv2 certificate authentication so I need a certificate of identity.

  Thank you

  Dana Burton

  Hi Dana,

  I suggest you to ask your question at the following link.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

• CUCM 10.5.1 LDAP Sync not show a single user

  Hello

  I use cucm worm 10.5.1.X and it is fully synchronized with LDAP.

  like today, I saw a user is not displayed in the user section final cucm.

  I Resync and restart the Cisco directory service, but still not able to see this user in the end-user CUCM section.

  Anyone know what is the problem and how to fix it?

  !

  !

  the last time I used a single document of cisco and with drive erased cucm section the user's search history and showed users.

  but now I am unable to find this document and implement measures on cucm as well as find the user in the user section final cucm.

  Is this user in a container that is covered by your research base of the LDAP integration, or was perhaps inappropriate user different worms?

  The user has may be disabled in LDAP?

  You have a filter on your LDAP integration, if yes what is the filter?

• Short Oracle attribute settings is not available

  Hi there,

  I am new to Oracle short, I want to add a new column to the existing report.

  However, under control panel-> discovery of information I am not able to find the attribute settings if I logged as a sysadmin. Any help on this is much appreciated.

  

  Thank you

  Ravi Khalil khider

  Hi Ravi,

  Here is the link to OEID 3.1 Documentation: Documentation Oracle short Information discovered

  Please read these documents, it will help you.

  Attributes are specific to the application is available under Application settings.

  Thank you

  Sampath

• Houston-25058: type attribute Definition is not found in

  JDeveloper - Studio Edition Version 12.1.3.0.0

  Migration project 11.1.1.5 ADF - > 11.1.1.7-> 12 c.

  No problems during the migration and everything works fine (apart from a problem of Javascript).

  Now in the 12 c environment, I created a new application (library) and I am facing the slot issue during execution;

  Houston-25058: xxx attribute type Definition is not found in xxxx

  1. I have 3 of VO and all 3 have the same evaluation office, tables and joins etc.

  2. for VO 2 of his works fine, but 1 of the VO throws exceptions.

  3 cross checked EO to VO to PageDef, throughout all the way all the attributes and references exist.

  4 BC4J Tester works fine, no exception for the VO above with NAV and Associations etc.

  Anyone falls on this?

  (CE mark as answer since I resolved the issue and I managed to progress)

  Subramanian

  Thanks for the elaborate response.

  I want to answer all of your questions, but I managed to deal with that, ok. nothing smart or technical, what I did is recreated a new (exactly the same thing until the last attribute of layout) create VO, LIKE, VL and declarative added page, exactly how I did before, that's his work... to be honest I never thought that it will work.

  Now, this behavior triggered a few other questions: -.

  1. I created 2 sets of features exactly the same way and it works and is not another?

  2 can we do something with the new JDeveloper 12 c?

  3. If this type of behavior will happen at the average / towards the end of the development, I can't recreate / restart never time, due to the complexity of the feature?

  Any thoughts?

  See you soon,.

  Saran.

• External LDAP user not authenticated

  Hello

  Using Weblogic 12.1.2 I created an Active Directory authenticator and can connect to our Windows Active Directory so that it will give the list of users, that I care to see in the 'Users and groups' tab of the Weblogic administration console.  However, when I try to use my Java process authentication, it indicates that the user cannot be authenticated (LoginException java security survey).  This same code works in a different environment with Active Directory configuration.  If I use our weblogic user default ' local' (one who is allowed to start the server), I do not see the exception and the user is authenticated.  Anyone know how I can get my "external LDAP user" to authenticate and why he would be treated differently from a 'local' user or why it would be different depending on the environment?

  Thank you!

  Hello

  Able to connect to the weblogic console you use Active directory users.

  1. check if you are able to see all the users in the Weblogic console.

  Areas of security ===> myrealm ===> users and groups

  2. also did you add the user or group in the global section.

  Take a look at the link for the reference of AD with Weblogic configuration below.

  Configuring Active Directory with Weblogic Server 10.3.6 - weblogicexpert

  3. check control flags what took.

  Defined as "SUFFICIENT".

  It may be useful

• Extract the attribute name (s) (not) - how to?

  version: 11.2.0.4 (standard no company)

  context: determine all fragment a (e) xml attribute names.

  Table ddl (just a shadow table for unit tests):

  CREATE TABLE FAR_XML
  (
    REQUIREMENT_ID  NUMBER,
    FAR             SYS.XMLTYPE
  )
  XMLTYPE FAR STORE AS SECUREFILE BINARY XML
  

  sample:

  <F_A_REQ>
    <RULES>
      <VALUE KEY="FADEF_PRESENT"><![CDATA[E239]]></VALUE>
      <VALUE KEY="FADEF_SECTIONS"><![CDATA[1.2]]></VALUE>
      <VALUE KEY="FADEF_DEFINITION"><![CDATA[E257]]></VALUE>
    </RULES>
  </F_A_REQ>
  

  question: How can I query a table with an xmltype column (not placed on a diagram) and derive what the KEY 'names' are for a single record?

  desired output:

  FADEF_PRESENT

  FADEF_SECTIONS

  FADEF_DEFINITION

  Thanks in advance for any guidance.

  -abe

  For example:

  SQL> select x.value_key
    2  from far_xml t
    3     , xmltable('/F_A_REQ/RULES/VALUE'
    4         passing t.far
    5         columns value_key varchar2(30) path '@KEY'
    6       ) x
    7  ;
  
  VALUE_KEY
  ------------------------------
  FADEF_PRESENT
  FADEF_SECTIONS
  FADEF_DEFINITION