Will be the dual OS slows down my system?

Similar Questions

• Latest Vista updates have picked up my use of the internet and slowed down my system

  Last week, I had several automatic updates. In the meantime, updates have been loading on my computer all landed and froze. After the updates, I'll have a terrible time in AOL. The program has slowed down and often gives me an error message that the system is not responding. I contacted AOL who gave me many suggestions that I follow, but I still have problems (more my overall system is slow now). Says to contact Microsoft. It may be a problem with acceleration. I don't have these problems until the updates installed this week.

  Now my system restore no longer works. I can't go back to before the updates. What can I do?

  Hi andrewgpig,

  Thank you for writing to Microsoft answers Community Forums.

  Possible cause would be that updates might conflict with other programs on the computer. Also could have damaged some system files on the computer.

  I suggest to try in safe mode and check the performance of the pc first.

  To start the computer in safe mode, do in the link below

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If it works fine in safe mode, then find the program that is in conflict. The link below shows you how to do a clean boot

  http://support.Microsoft.com/kb/331796

  If the steps above fail. Try to do a scan sfc

  Try to run a SFC scan, to do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  I hope this helps. .

  Let us know if this doesn't work or if you need further assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer

• Prevent the Beep.vi slow down the VI

  Hello

  I'm working on a metronome that should run for a period of x with a frequency of x. The time is in seconds and rate.

  Whenever there is the beet, the VI must make a beep. This can be done easily by the beep.vi, but the standard for the beep.vi is to play one system.

  This is a fairly long tone (10 of Windows). And so, I want to put my own frequency and duration of the beep.

  But when I change this in the beep.vi, the VI will wait for the set time (msec) before it continues the vi. If it slows down the whole VI.

  Is there a way to make the beep.vi a sound signal with frequency and duration that I put, without that it slows down the VI?

  Thank you!

  Have the code "beep" performed asynchronously to your hand VI: have the VI in another loop and use a queue / notifier to notify the loop when playing the main loop.

• Updates from HP agent... always began in the early and slows down computer

  HP Pavilion a1222n, Win XP Home

  When we move first on the computer, it is slowed down by "updates HP agent running' controlled by the Task Manager.

  I would like to disable the execution the present automatic and run it when I want to run the updates from HP.  I read in another post to go to start > all programs > setting > select never allowing you to a chosen when run the HP update agent.  I can't seem to find it on this machine, the message I read was for another model.

  Thank you

  Ron3033

  Hi Ron,

  Try the following.

  Hold down the Windows key and press R.  In the run box, type msconfig and press to enter.  In the System Configuration window, select the Startup tab and Remove the check mark next to the HP update agent.  Click apply and then click Ok to save the changes and restart the PC for this change to take effect.

  Kind regards

  DP - K

• Dual graph: the 2nd card slow down the bad

  I have a Mid 2010 Mac pro 2.8 ghz Quad Core with 32 GB of RAM, running two monitors and running a chart double installation with two cards identical to 7950 / 3 GB AMD Radeon HD. I have the cards for two monitors. 1 monitor is connected with a DVI - I cable. The second monitor is older with just VGA connections for what will a VGA cable with a DVI - I adapter.  To using each card to power each monitors is probably the problem but there may be a fix on the forum somone help me to implement. Basically, the second map dragging. The mouse jumps and does not respond well to the movement and when I run FCPX GAL of the entire screen. Clicks are delayed and the mouse movement is delayed.

  When moving to the second screen powered by the second card, all is well and that responded to the questionnaire. Things get really tough, if I run Geeks3D GPUTest GUI 0.6.1. Dragging graphics screams like crazy. Looks like the fan is going to come off. I'm running a TessMark X 64 (OpenGL 4) trial to full screen, no software rendering to 7680 x 1440 resolution and anti-aliasing on 8 X MSAA. The generated images are beautiful and not fall a framework, but the sounds of the map are horrible. The exercise test and reference. All have solutions? Is it easy to replace the fan? How can I eliminate the LAG and drag? Or is this card about to die?

  If any screen has a DisplayPort input, it certainly is the connection of choice. It puts less stress on the maps, because it displays DisplayPort have an internal buffer and the 60 Hz "heartbeat" screen redraw is reduced to mainly the changes. This reduces interruptions on the cards and allows them to calculate at full speed.

  Dual display software on Mac OS X is probably "all set to the top" for the end of 2013 Mac Pro configuration, which reserves the second GPU intensive calculation only.  NO display on the second card.

  Problems of tracking mouse are associated with computers whose CPUs are completely absorbed with a high-performance computing. Have you looked into other performance issues? You have enough RAM? are your processors topping out?

• After the restoration of the computer, he slowed down. Also, defrag won't work does not by saying "this scheduler should run, saying" and cannot remove programs.

  Original title:

  I restored my laptop to the RSD date, then my laptop is slow with loading and entered in safe mode.

  Since I experinced problems with;

  deframent will not run saying that schedular must be running so recessed on schedular and does nothing.

  Tried to remove programs and it is still sitting there, but when asking him to remove his saying they aren't there.

  Tried to run such programs a 3d max, Malware and provides a warning dialog box saying that no endpoint data map would c:\windows\sytem32\ and e:\

  created

  They are also no newspaper, even if it has been a week since the restoration and had the pc 6 months

  I tried to clean my pc AVG saying they are virus-free

  I can not restore I can't even disable the comments, sign in.

  Help, please?

  Hello

  1. why, initially, you restore the computer?

  2. What is the brand and model of the computer?

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Run a scan disk to check the hard disk for errors.

  Check a drive for errors

  Important: While performing the check disk on the hard disk, bad sectors are found and if he's trying to repair this area, all available data on the risk of being lost.

  Method 3:

  Check the memory to find errors.

  Diagnosing memory problems on your computer

  See also,

  Ways to improve your computer's performance

• The VM startup slow down, delay long before the guest operating system begins startup

  Evaluation of VMWare to set up the VM for the maintenance of the software. Set up a virtual machine, install Windows 7 SP1 32-bit, everything works well. Once started, the performance is excellent.

  The symptom is that when you start the virtual machine, either starting from cold boot or suspend, there is a significant delay before the power of VMware on / start screen is displayed. Once it appears, the operating system starts starting (or the recovery of wakefulness) quickly and performance is normal after that. During the start-up period, the whole system is insensitive, host and guest operating system.

  See the extract of newspaper below to 09:54:28.619 moment where the delay occurs followed by the entry concerning 09:55:11.625 time when start continues, a delay of 43 seconds during which nothing seems to happen and the system does not respond. After that, everything is fast.

  Any ideas or suggestions?

  More info...

  VMware Player version 6.0.1 build-1379776

  Host PC: Dell Optiplex, Intel Core2 Quad Q9650 3.00 GHz ABLE to

  Installed memory: 4.00 GB (3.25 GB usable)

  Boot disk C: Intel SSD, 180GB (where the VMware is installed)

  Data disk F: Seagate 1 TB (where the virtual machine)

  SE host: Windows 7 Professional 32-bit SP1

  Guest OS: Windows 7 Professional 32-bit SP1

  excerpt from VMware.log:

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: VMMEM: initial booking: 1442MB (1024MB = MainMem)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched_PowerOn: minGuestSize ball 104857 (80% size required min 131072)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem reserved (in MB) min max recommended 128 2493 2493

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: PShare: activated 1 1 Adaptive scanRate [16, 400]

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem 5159 262144 np 35890 pg 590258 anon

  2014 02-19 T 09: 55:11.625 - 05:00 | VMX | I120: MemSched: numvm 1 locked pages: num 0 max 605661

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: locked Page limit: host 638514 config 638208 dynam 613853

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: minmempct 50 minalloc 0 admitted 1

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | W110: NUMA: application of automatic dimensioning VM ignored

  configuration (.vmx) VM file:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "10".

  scsi0. Present = 'TRUE '.

  scsi0.virtualDev = "lsisas1068".

  SATA0. Present = 'TRUE '.

  memsize = "1024".

  MEM.hotadd = 'TRUE '.

  scsi0:0. Present = 'TRUE '.

  scsi0:0. FileName = "BCDEVVM.vmdk".

  SATA0:1.present = 'TRUE '.

  SATA0:1.filename = "E:".

  SATA0:1.DeviceType = "cdrom-raw"

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.virtualDev = "e1000".

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  ehci.pciSlotNumber = "35".

  Sound.Present = 'TRUE '.

  sound.virtualDev = 'hdaudio '.

  sound.fileName = 'speakers (SoundMAX Integrated D.

  Sound.AutoDetect = "FALSE".

  MKS. Enable3D = 'TRUE '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "thinprint".

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  hpet0. Present = 'TRUE '.

  usb.vbluetooth.startConnected = "FALSE".

  displayName = "BCDEVVM."

  guestOS = "windows7"

  NVRAM = "BCDEVVM.nvram."

  virtualHW.productCompatibility = "hosted".

  gui.exitOnCLIHLT = "FALSE".

  powerType.powerOff = 'soft '.

  powerType.powerOn = 'soft '.

  powerType.suspend = 'soft '.

  powerType.reset = 'soft '.

  extendedConfigFile = "BCDEVVM.vmxf".

  gui.lastPoweredViewMode = "full screen".

  UUID. BIOS = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  UUID. Location = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  scsi0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "160".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  vmci0.pciSlotNumber = '36 '.

  SATA0.pciSlotNumber = "37".

  scsi0.sasWWID = "50 05 05 62 bb c9 b7 b0.

  ethernet0.generatedAddress = "00: 0C: 29:E6:38:E3.

  ethernet0.generatedAddressOffset = '0 '.

  vmci0.ID = "1508260067".

  vmotion.checkpointFBSize = "134217728.

  cleanShutdown = 'TRUE '.

  softPowerOff = 'TRUE '.

  USB:1.speed = '2 '.

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:1.port = "1".

  USB:1.parent = "-1".

  SATA0:1.AutoDetect = "FALSE".

  tools.syncTime = "FALSE".

  unity.wasCapable = "FALSE".

  tools.remindInstall = "FALSE".

  toolsInstallManager.updateCounter = '1 '.

  checkpoint.vmState = «»

  Monitor.virtual_mmu = "automatic".

  Monitor.virtual_exec = "automatic".

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = 'hidden '.

  USB:0.port = "0".

  USB:0.parent = "-1".

  USB. Generic.AutoConnect = "FALSE".

  serial1. Present = 'TRUE '.

  serial1. FileName = "COM1".

  floppy0. Present = "FALSE".

  Hello

  I know what you want to say as I've seen sometimes as well. But especially on older hardware or if there are problems with regard to particular resources. For example I saw this on an ESX host (yes I know product different) where there was a problem with the storage not enough providing IOPS / s.

  I saw also this on older versions of Linux (IIRC 7) workstation where the host had an Atom based CPU, there I updated to more RAM and a more recent version of the workstation and the problem disappeared.

  Then I also saw it on the 4/5 merger when my host operating system was out of memory and I tried to start another operating system to prompt anyway.

  I do not consider a normal behavior for the slow start and does not respond, it is an indication that the hypervisor is seeking some resources, but does not receive them fast enough.

  The reasons can be many. Indeed things like antivirus could be biting you if she tries to analyze all files (including virtual disks) at their opening.

  FWIW, I also understand the support response as would be expected if your host is a bit thin on the resources (for example, trying to start a VM 1 GB on a host Win7 with only 3.5 GB of RAM) and if the virtual machine runs OK after the initial startup delay, it's mostly just an annoyance.

  --

  Wil

• Move image image in the develop module slowed down considerably in the last version of LR

  I am a user of long date LR and use a fast PC Win10 (32 GB DDR4 RAM, SSD, GT 740 video discs, CPU i7 etc.) and the last LR update (or is this the one just before it) has radically changed the speed I can go from one image to the image in the develop module.

  I read about a memory leak problem but with 32 GB DDR4 memory 2133 speed I never noticed the RAM usage (perhaps 25%?) so I don't think that is the question.  Something has changed in LR and Adobe to remedy.  The downturn is really affecting my work and I make my living in this way! Adobe, please help us!

  Try to uncheck the option preferences > performance > CPU graph use.

• connection to the database to slow down using OAS 10.1.2.3

  We have customized Oracle Forms Application; The current production version is 10g (9.0.4.3).
  We are trying to upgrade to 10.1.2.3.
  
  I have installed on the same server at separate oracle 'forms and reports' 10.1.2.0.2 + Patch 10.1 .2.3;
  We use exactly the tnsnames.ora or sqlnet.ora file in the production version and the new version. When I me sqlpus using oracle version of production House that he takes 3 seconds running connects to database and when I execute sqlplus using the new connection to the oracle home in the same database takes 30 sec.
  What is the problem?
  
  My sqlnet.ora file is
  
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  NAMES. DOMAINE_PAR_DEFAUT = EVERYONE
  
  NAMES. DIRECTORY_PATH = (LDAP, TNSNAMES, ONAMES, HOSTNAME)
  
  DEFAULT_SDU_SIZE = 8761
  
  My tnsnames.ora file is
  test. WORLD = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = TCP. (WORLD) (PROTOCOL = TCP)(HOST=TEST) (PORT = 1521))) (CONNECT_DATA = (SID = TEST) (GLOBAL_NAME = TEST. «"" WORLD)))»»»
  
  Thank you, Mary

  Great Mary!
  Can mark you your question as a reply to show to other users.
  First of all... It was the wrong forum :)
  concerning
  Maurice

• can software spies, junkware slow down the computer. the same as I ask for Add-ons!

  Hello

  1 can spyware, adware or junkware slow down the computer?

  2-can we some add-ons slow open IE?

  Thank you

  Johan

  Hello

  1 Yes, all forms of malicious and unwanted stuff such as spyware, malware, junkware, etc. can slow down your system based on what they have been coded for it.

  2. According to the addon, Yes, it can slow down your system. Also, a large collection of addons installed and running will also slow down your system.

  Kind regards

  Patrick

• Slow down the images of the drone

  Hello

  I'm new to the first, please bear with me.

  Typically, I shoot my footage of drone in 50 p, fall in a 25 p timeline and it automatically it slows down to 25 p (in the Final Cut).

  So my question is, if I drop a video 50 p on a sequence of 25 p in the first, will be slowed down up to 25 p (50%)?

  PP will play all media at the rate of the sequence.  But... it will not speed up or slow down the images that do not match.  It will just drop or repeat frames to get the correct reading.

  Fast (or slow) movement is always done manually.  It just never happens.

• The dc7600 fan not slowed down speed

  I'm new here but I have no news for the repair of computers, a problem which therefore left me speechless!

  A customer brought me a Hp DC7600 SFF desktop computer and said that the thing is so loud it doen't want to use it.

  Card"Pentium 4 3.00 Ghz

  2 GB DDR2 533 memory

  320 GB HD

  Win 7

  I lit and was swept away, this thing is so strong that you does not think!

  I disconnected the chassis fan that he calmed down some but the CPU fan turns at 5400 RPM all the time, I can't get the fans to slow down! I tried to use the program Speedfan, it was a joke.

  I am at a loss for what to do and wondering if something on the Board that controls the speed of the fan go haywire. I also upgraded to the latest BIOS and that did nothing.

  When the computer starts, it seems frankly a small liquidation aircraft prepares for take-off!

  What to do, what to do? ANY suggestions would be most appreciated.

  Thank you for your comments/ideas and suggestions. I would recommend he get a newer system because I think it's history! We have done everything that we can and it's time to throw in the towel! Thank you so much!

• Games slow down a computer?

  I played Command and Conquer 4 on my computer very old. It can be played, but the graphics are bad and it is very slow. If I continue to play the computer may crash. So I had planned to play on my new computer. But my parents do not allow that. Reasons are

  1. Games can have viruses.
  2. Viruses can hack into my computer and get information, such as bank accounts. (I installed Bitdefender 2010 IPSec)
  3. Games make my computer unreliable and slow.

  Can you check for me if these reasons are true. I know too many games running at the same TIME will be a slow computer. But what happens if my requirements meet the minimum requirements for the games, it slows down the computer? Also, I defrag and cleaning my PC regularly so do not understand that my computer will do to appear slowly over a short period of time (1 year).

  Operating system
  MS Windows 7 Home Premium 32-bit
  CENTRAL PROCESSING UNIT
  Intel Mobile Core 2 Duo P8600 @ 2.40 GHz
  45nm Penryn technology
  RAM
  4.0 GB Dual-Channel DDR2 @ 399 MHz (5-6-6-18)
  Motherboard
  Compal 30F8 (CPU)
  Graphics
  Generic PnP monitor @ 1280 x 800
  NVIDIA GeForce G 105M
  Hard drives
  313GB Hitachi Hitachi peripheral HTS543232L9A300 ATA (IDE) 47 ° C
  Optical drives
  DVD - RW PIONEER DR-TD08HB ATA Device
  Audio
  IDT High Definition Audio CODEC

  Hello TechKid.  Feel free to forward this message to your parents *.

  (1) their original CD-ROM or DVD-ROM games will not have the virus.  Back in the olden days where game was on a disk that it was possible that a set of second hand could have been infected, simply because the disks could be written after the fact.  Actually I've ever met.

  (2) a bit, (but still once falsely assume original games of detail will virus), in practice, they are much more wet than that.  Decent anti-malware and ensuring your machine and all the software connected to the internet is updated will solve this problem.

  (3) not true.  While the game is running, they are obviously fewer resources for other things.  But once the game has been closed it will not use all of the system resources.  In regard to making them unreliable, more wrong.

  * It won't do anything, they don't want to play you games on this machine, they will come with any excuse for this purpose.

  Anyway on this system, I think that you should always keep the graphics on their low settings, the graphics card is a budget card, not suitable for games.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net anddasmirnov.net. Please post back to let us know what works and what does not. :) And if a response is useful mark it as such. :)

• Fix, he says that addd-suite slowing down Internet Explorer,

  The Add-ons that Fix - it was referring to came from Mac McAfee.  If I disable them will harm the security on my computer?

  Hello

  (1) what version of Internet Explorer is installed on your computer?

  As you talk about the Mac McAfee add-on on the computer that slows down the performance of your Internet Explorer, you can disable this add-on to solve this problem.

  You can see this article which helps you to fix the problem.

  How to manage add-ons in Internet Explorer in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883256

  Ideally, it should not face security problems, but you can contact Mac McAfee support for more information.

  Hope this information helps.

• I replace my battery but I can't seem to get it slowed down what should I do to solve this problem

  I have replace the battery of mt on the laptop, but it does not load when I checked the battery put in said that the battery is slowed down what should I do to solve this problem

  Hello

  -What is the number of brand and model of the computer?

  It is sometimes difficult to determine whether a problem is caused by the equipment do not operate according to the manufacturer's specifications. But in the case of power - and more specifically a battery - it works or not.  If a battery is not that it is either a defective battery or a faulty charger.

  I suggest to check the connections, connect it properly.  If you have a spare power adapter only to login and check. Contact the manufacturer of the computer for better assistance.

  For your reference:

  ·         When you turn on your laptop, if your battery is more than 95%, you will get the message "connected but no charging current.

  ·         When you turn on your laptop, if your battery is less than 95%, you will see the message "plugged and charge" until the battery reaches 100% (not 95%).

  It will be useful.