Will put an end to my warranty for laptop?

I am a heavy user of HP pavilion G4. I received a message (error 90 b) said that my fan is not working properly. And I know my fan must be filled with dust. I disassembled my laptop components. The dust isn't too bad honestly. So, I cleaned the dust and assembled my laptop again. A few days later I got error message of fan again. I recheck again and the fan does not rotate smoothly. I think that's the problem, the fan of a PAPER jam. Is that my warranty will be voided if I disassemble my laptop by myself? And there is no sticker "null". I want to send my laptop at the HP store to get my laptop fan repaired by the 'GUARANTEE', because to get the spare part for myself is too EXPENSIVE, about RM80 (Malaysian Ringgit).

Hi aku6043,

Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

I see that you have some questions about your warranty. As a general rule, disassemble the laptop will void the warranty, but it does not hurt to contact HP Total Care at 1-800-474-8636 in North America or visit this link outside of North America to see what they say.

Thank you

Tags: Notebooks

Similar Questions

  • I increase my warranty for laptop.

    I increase my warranty for laptop.

    model No.:-g6-1302tx pavilion

    Hey sumrumu,

    I don't know what you're asking here.

    You want to extend your warranty?
  • Warranty for laptop

    NEW HP15-G020DX, bought 12/23 2014. from Best Buy.

    Computer laptop blue screening, will be not updated.

    Best buy States guaranteed HP is ONLY material and if errors are related software, I have to pay THEM FOR REPAIR?

    Laptop is ONLY a little more than 1 month, and best buy will not refund purchase for 15 days.

    Don't not HP covers EVERYTHING with their products?

    ANY help will be appreciated.

    Hi @charlesk245 ,

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

    If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about this here.

    Kind regards
    George

  • my warranty for laptop

    What is covered by factory? I HAV pavilion g6-2320tx in this model have adp?

    Hello

    The warranty covers any defect in part due to a normal wear & tear & will not cover accidental damage, spill water or power surge.

  • Warranty for laptop HP 15-d103tx issue

    The laptop have built in 'back' os. When I install another operating system then guarantee will get zero or not?

    Hello

    Operating system will not void your warranty, but HP will not be able to support all the operating system that you are installing. Only in the case out of the damage on your device may void your warranty.

  • Some performances are not completed to help put an end to everything in the model of parallel processes

    Hello

    This question confued me recently, I would use a parallel process of model and to finish running at the same time.

    If there are action steps in order, it seemed that will put an end to the execution of all.

    However, I put a wait instead of steps of the action function, there are a few executions not interrupted while I pressed the button finish everything in the toolbar.

    Hope someone can give me help. Thank you very much.

    PS. the number of testsockets has the value 9 in my teststand.

    I ran your sequence again, and I have reproduced the issue.

    It seems the action of the polls Test for success/failure of the VI at full speed.

    It will consume your CPU resource to 100%.

    So I add some delay in the VI to prevent election full speed.

    Please see the following block diagram.

    I tried and it seems resolved the problem.

    Ting

  • Power connector at right angle for laptop HP 2230 s?

    Is it possible to get an adapter at right angles to the power connector DC for my laptop HP 2230 s?

    The connector on the DC power cable that goes into the laptop out the path to the side (a good 2.5 "), which, besides being bulky, resembles an accident waiting to happen. On my old Fujitsu, the connector was barely right angle type, it came out at all, and was not a danger to catch on anything and damage the socket or the plug. This type of connector puts also much less strain on the DC input jack, as he does not act as a lever for bit.

    I've seen at right angles to the adapters for different types of cable (you plug your cable on one end and the other goes in the computer), like this:

    I hope you get the idea. In any case, what I would like is an adapter for the type of connector used on my HP laptop. The type of connector seems to be pretty standard in the range, so an adapter can be used with many models of HP. In the end, I hope that HP will change cables from their power supplies for laptop to come with these types of connectors at the ends, but in the meantime, is possible to get an appropriate, either through HP or a third party adapter?

    Thanks in advance to anyone who can offer suggestions!

    http://www.bixnet.com/cntlc90.html

    I know this is an old thread... but since nobody listed everything that might work, I found this on the same site listed zetto.

  • Check for laptop

    Hi all!

    How long does it take before you receive a confirmation of your standard warranty? It's almost a week since I have saved my laptop.

    Apart from the registration of the guarantee and the MicrosoftOffice OneNote, is it necessary to register for my operating system?

    I just boughty my laptop (L10 series) about a week ago and I need information about the records.

    Thank you in advance!

    Hello

    Information on the guarantee, you can find on the Toshiba page in respect of Services. Very interesting site is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq_selection.jsp?z=114&CFID=Warranty%20-%20Notebooks. You can find the FAQ on the warranty for laptop plan.

    Good bye

  • Cannot put an end to calls on Skype for WP 8.1

    Hi all

    I can't put an end to calls to fixed/mobile phones on Skype for WP 8.1.

    I have the touch screen and it just goes black (as it is in standby mode) while my finger is on it. Screen appears again when I remove my finger. Appeal does not end. The only way is the other person to end the call or me to turn off my phone.

    All solutions? Looks like a pretty major bug.

    Thank you

    Hey,.

    and thank you for your additional info/effort.

    After some research, we have learned that it is a problem experienced with the Lumia 630/635 and she's been fixed to WP8.1 update 1. Wp8.1 update 1 deployment was launched and it will come to the Lumia 630/635 so.

    You can check if it is available by going to settings-> check updates to phone for updates.

    BR

    Jake Kunnari

  • I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

    frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

    Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

    On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

    ``````~~~~`````

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

    When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

    Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

  • Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

    You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

    Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

    t-4-2

  • Cannot put an end to the programs

    Whenever a program crashes on my computer, and I try to put an end to this program, I can't do it.  It's as if the pane "end of program" also blocks.  So, I have to turn off the machine.  Anyone know what I can do?

    Instead of finding ways to put an end to the program when your computer crashes, I recommend you to understand why your computer is locking up and fix it in place.

    If turn you your machine (I guess than the power button), you will soon have a new post that looks like this:

    My system does not boot and I see a message like this:
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Then someone will offer to you try to repair your system with KB307545 and which will not help you either.

    XP has a built-in mechanism that is designed only to help diagnose the locking systems, freeze or crash, and it is very useful.

    I suggest to use (that's what it is) after general troubleshooting basic steps are exhausted.

    You know - easy as questions... What is the program that is locked?

    I would also say everyone with blocking XP problems starting their own new topic so they can be worked separately, or this thread is going to be annoying quickly.

    Thankfully, I'm not a moderator (Fortunately, I don't have no control on the operation of this forum).

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    What you see you don't think you need to see?

    What do not you think that you should see?

    Fill in the blank: my system worked well until: _.

    Click Start, run and enter in the box:

    Msinfo32

    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

    This will minimize back Q & A and eliminate guesswork.

    Perform scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.

    They can be uninstalled later if you wish.

    Do, or do not. There is no test.

    I decided to implement the points for a new puppy instead of a pony!

  • Error code: 0x800CCC0F, your server suddenly put an end to the connection when sending emails with attachments

    Original title: send Inbox problems

    If I attach a pdf file to my outgoing mail, it lies in the Outbox and will not send then I get an error message, send e-mails with no attactments is no problem

    If you have your anti-virus value analyze them, disable the e-mail scanning.
    It is redundant and doesn't interfere with the transmission, especially with Windows
    Mail.
     
    --
    Dave N.
    MS - MVP (Mail)
    Windows 7 Ultimate 64
    "wynnieboy" wrote in message
    News: * e-mail address is removed from the privacy... *
     
    After my rarlier question if I add an attachment to an e-mail, it will be
    do not send and this is the error message
     
    Your server suddenly put an end to the connection. Possible for causes
    It include server problems, network problems, or a long period of
    inactivity. 'A last try', account: 'imap.aol.com', server:
    'smtp.aol.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, Socket error:
    10053, error number: 0x800CCC0F
     
     

    Windows 7 Ultimate 64

  • Why should I renew my warranty for computer dell laptop, what are the benefits?

    IAM from the India.

    I have a laptop Dell-Inspiron-3521 (win - 8.1, touchscreen).

    It's almost a year since I bought this laptop & the warranty will expire on 07February2015.

    I want to know the benefits of renewing my subscription OR what happens if someone has a guarantee on access to his laptop?

    that is, customer gets free or not expensive replacements for batteries etc... OR it's the same cost to repair your laptop, whether in warranty ot not...?

    MY WARRANTY DETAILS ARE;

    Service provider start date end date

    LS (no description available) DELL February 7, 2014 7 February 2015

    POW (parts only warranty) DELL November 7, 2014 7 February 2015

    NBD (on site the next business day) DELL November 7, 2014 7 February 2015

    Accidental damage Service DELL November 7, 2014 7 February 2015

    I APPRECIATE ANY KIND of HELP or you guys can share your own experience here WRT-warranty dell (since I very little time left to make a decision.)

    Batteries are normally classified as consumables and generally covered only for 1 year standard regardless of warranty for the system.

    The warranty will only be for the rest of the equipment of systems; Reference Dell will replace for example, motherboard, hard drive, processor, screen, charger if they fail. These can be expensive for the user to the source and manually replace.

Maybe you are looking for