Win 7 driver for Deskjet 950C

Similar Questions

• Driver for Deskjet 9650/9800

  I switched to Windows 7 64 bit and my HP 9650 does not work.  Onlline HP asked me to download driver for Deskjet 9800.  It still does not - it can print a photo and then just spits out the paper without printing.  I downloaded the player for 9800 several times and installed several times - no luck.  Then, I downloaded the latest HP Diagnostics (08/03/11) tool.  He said everything was fine EXCEPT the pilot - instructed me to download the latest driver, I've done many times before.  Need help - love the photos it prints!

  I FOUND THE ANSWER TO THIS PROBLEM!  Yay!  Go to this link and follow these instructions:

  http://support.HP.com/us-en/document/c01796821

• Need Win 7 driver for my HP Deskjet 1000 c printer.

  I need a driver for Windows 7, 64-bit, please, for my HP Deskjet 1000 c printer.  Printer is old but works well with XP and large format.

  Thanks to all those who can help you.
   
  Original title: hp deskjet 1000 c

  Hi John,.

  You can download the driver for HP Deskjet 1000 c printer on the manufacturer's Web site.

  Check out the link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4066377#N216

  If the problem persists, I suggest you contact HP support for help.

  http://h10025.www1.HP.com/ewfrf/WC/contacthp?CC=US&DLC=en&LC=en&os=4063&Product=4066377&sw_lang=

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Tecra M9 - need to Win 7 driver for PCI communication controller

  Hello world

  I've been clean installation Win 7 32 bit on a Toshiba Tecra M9 and thereafter, all drivers.

  Now in the Device Manager it is still an unidentified device called "Communications controller PCI (single)", with several starting hardware ID by "PCI VEN_8086 & DEV_2A04 &.

  I can't identify what device it is, I searched for hours and a lot of people seem to have this problem. Everything works, except that a Campbell Scientific device (USB adapter to an owner interface) does not work and I fear that this could be the cause.

  Can someone help me?

  Best regards
  trash

  If you want to identify the unknown device please check http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  In your case, it's Intel PCI communication controller-Intel Management Engine Interface.
  Have you installed a driver for card slot?
  Try please install the driver of chip card reader and post comments.

  You will find that all the drivers on Toshiba download page?

• 10.8.2 OSX driver for deskjet 5550?

  HP never, ever release a driver HP Deskjet 5550 for OSX 10.8.2? If not, why? It is a printer perfectly fine now, I can't use. Thank you...

  Signed,

  A frustrated owner of HP printer

  Hello

  The printer is no longer supported for Mac OS X 10.6 and will not become supported in the future on new versions of the OS.

  http://support.HP.com/us-en/document/c01856359

  However, you can still find 3rd-party solutions that you can use the printer.

  Try the HPIJS 3rd part drivers printer below, don't forget to install one of the 3 required downloads and and follow the Set Up instructions... These drivers compatible with all the latest versions of OS and your printer list as supported:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs#Downloads_Required

  Shlomi

• Re: Satellite L300-254 - need Win XP driver for WLan and FN keys

  I have laptop satellite L300-254 pslbge and have problems with drivers. This computer was emty (no recovery disk or drivers) then I bought it.

  I installed Win XP SP 2 disabling AHCI. Instaled the common Modules, Chip Set Utility, and when I try to install the drivers of controls (for the Fn keys). It is said that I did not install common Modules.

  Tried to install the WiFi drivers (realtek, but I do not know if the wlan hardware is realtek), but it is not recognized in Device Manager, (? ethernet controller), Lan works well.

  So please help me with wlan and the Fn keys problems

  Hey Buddy!

  I m using a Satellite L300 too with XP and I t notice any problem. It works correctly and the Web from Toshiba site displays all the drivers and tools for this.

  However, firstly everything that you should make sure that you have installed all the drivers for your laptop. The site Web of Toshiba shows only Realtek driver for WIFI then I guess you have Realtek WLAN card. You can run setup.exe to install drivers or if you get an error message?
  If you are not sure, you can also check what WLAN card you have on this site:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can see in-online WLAN card properties Device Manager.

  Toshiba tools for FN keys, I can only say that you must install applications first Toshiba and then all the other common Modules. Common modules are required for all Toshiba applications works. Then remove the tools installed Toshiba and use this installation order that I used successfully on my Satellite L300:
  Toshiba Common modules
  TOSHIBA Hotkey utility
  Toshiba Touchpad POWER utility
  Toshiba Utilities
  Toshiba controls
  TOSHIBA Power Saver (not necessary, but very nice tool).

  I hope I could help a bit.

  Good bye

• XP x 64 driver for Deskjet 6540

  Is there a XP x 64 driver available for a HP DeskJet 6540?

  The driver for a HP DeskJet 6940 seems to work very well.

• Can not find the driver for Deskjet 4180 with the new MacBook Pro and OSX10.9.4

  I can only find 4100 series that does not install.

  Ideas?

  Hi sensho.

  Welcome to the HP Forums!

  I see you are trying to find the driver for your HP Deskjet 4180, with a new MacBook Pro with OS X 10.9.4, and I am happy to help you with this driver issue!

  Please take a look at this website, OS X Mavericks v10.9: installing and using the printer on a Mac.

  Hope this is what you are looking for and have a great day!

• Please help locate the PRINT DRIVER for deskjet 840C

  Hi All-

  I urgently need a PRINTER DRIVER for THE HP DESKJET SERIES 840C. IT APPEARS NOT ON THE CURRENT LISTS OF HP I OWN THE PRINTER AND THE DRIVER WAS INSTALLED. HE LOST WHEN MY SYSTEM WAS WIPED OUT, NOW LOOKING TO INSTALL ON A NEW COMPUTER. I HAVE A WINDOWS 7-64 BIT SYSTEM

  Thank you!!

  Hello:

  Here is the link to the support page and drivers for your printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=19045&lang=en&cc=us&TaskID=135&prodClassId=-1&prodTypeId=18972&prodSeriesId=25399

  Select the windows 64-bit operating system and follow the instructions to install the printer there is no driver windows 7 available for download.

  Paul

• Is there a driver for DeskJet e3520 Android

  I have a Samsung Tablet I want to print on a printer HP DeskJet e3520.  It seems that there is no driver for such a request, despite the fact that HP has an Android tablet.

  Hello and welcome to the HP support community!

  There is no 'pilot' printer installed SE on Android devices.  They need an application that allows to transfer the file, usually wireless to a printer capable of the same way.

  HP offers the ePrint program (free in the game store).  Since your printer is compatible ePrint you can print two ways:

  1 save the printer with HPconnected.com and receive the address you created for it.  Now you can send files as attachments to the printer (if you have connected it to your Wifi network at home!)

  2 using the 'share' built-in Adroid feature, you can 'share' a file and direct them towards ePrint.

  Note: The application ePrint must be activated first, with a code that you request HP.  Open the application to activate.

  Note 2: The 'Print' function integrated in the form of tablets from Samsung will not work unless you have a Samsung printer compatible wifi.  This is the way it has been designed by Samsung.

  I will pass this message to the ePrint section where, printing from Samsung Tablet has been discussed several times.

  WyreNut

• Need win 7 driver for PERC 9 Mini h330

  I need to install Win 7 64 on a workstation Precision Rack 7910. The SP1 installation disc is not a driver for the RAID controller.  Download of 7910 page support is an exe file that is not recognized and won't let me extract the driver to copy. I couldn't find one that I can put on a USB key and the Windows installation routine will recognize it as a valid driver.

  I tried to search for the site of Dell and Googling for him, also tried to find it on another victory 7910 10 running.

  Can you help me to find or suggest a work around?

  No "circumvention" is necessary.

  You can extract the drivers from the Package update for Microsoft Windows format with the switch e, but one you need is the driver hard drive format:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=KMGRV&FILEID=3398353767&osCode=W764&ProductCode=precision-r7910-workstation&LanguageCode=en&CategoryID=SG

  You must download and run the file to extract the content before using it.

• Re: Tecra A7 - Win XP driver for PC card Type II card necessary

  I have not found on the toshiba site, the driver for the PC card slot for 1 x Type II card, type: slot Express Card?
  where is it possible to download?

  The slot for PC card requires no additional driver and, therefore, the driver isn't available for download

• Satellite Pro A100 - need win 7 driver for SD card reader

  I can't find driver for the next HD
  * SD card reader *:
  PCI\VEN_104C & DEV_803B & SUBSYS_FF101179 & REV_00

  other info
  System DMI information
  Manufacturer * TOSHIBA *.
  product * Satellite Pro A100. *
  version * PSAASE-00H004GR *.
  Sagna: * Win7 32 bit *.

  I have my serial number in
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  but for Win7, I found only
  Update the BIOS
  Wireless Lan driver
  and no SD driver

  I also German?

  Your old laptop model no is of course not supported for Win7 but you can try to use the Vista driver and most of them also works on Win7.
  Test if you please and let us know if this will help.

  By the way: as you can see this forum is English language only, so try please post in English. Who cares if you will make mistakes? ;) My English is not so perfect.

• Win 7 driver for Laserjet 2100

  I couldn't know if HP released drivers for the LaserJet 2100 to use in a 64-bit Windows environment. I tried the driver section, but I am unable to check if the driver exists [maybe it's me, my computer or HP that prevents the opening of the section of driver web page, but I've tried and failed several times]. I plan to purchase Windows 7, but will delay for a while if I can't continue to use excellent buddy 2100. I would appreciate any help on this matter. Thank you.

  He there is a universal driver for PCL 5, PCL 6, and PS available for download on HP.com.  Laserjet 2100 drivers are available through Windows Update in Windows 7.

  

• Cannot install the driver for Deskjet F4500

  I get the error message: "the system cannot find the specified file' where to install the driver for F4500 to a new race of ASUS ZEN widows 7 64 bit and install then fails." Everything works fine on my old Lenovo (also Windows 7). Help!

  You try to use disk or have you downloaded the latest drivers on the website of HP series?

  Here is the latest version of the drivers for your printer and the full OS features:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-73705-2&cc=us&DLC=en&LC=en&OS=4063&product=3944758&sw_lang=