Win 7 install hp laserjet 1300?

Similar Questions

• Install HP laserjet 1300 Windows XP, SP3,

  When you try to install the HP Laserjet 1300 on Windows XP, SP3, I get an error message and the process rollsback.  The message is

  "Cannot install this hardware there was a problem installing this hardware, HP LASERJET 1300 PCL 6, an error occurred during the installation of the unit,"the specified module is not found."" »

  I used the original printer cd, bought a second new HP cd and downloaded the drivers directly from the HP Web site.  I get the same error message on all attempts.  The show record events Setup printer every time error.  Can anyone help?  Thank you

  Hello

  1. is the specific question of the installation of printer drivers HP LaserJet?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message?

  4. How is the printer connected to the Windows XP computer?

  Follow the mentioned methods:

  Method 1:

  Run uninstall and reinstall correct and check for the issue.

  a. to do this run the FixIt tool from the following links.

  b. click on the link below and select run now button.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  c. After you download and run for the first time

  d. Select run on window smallpop and select run on Internet Explorer-security warning window.

  e. Select detect problems and allow me to select patches to apply.

  f. Select installation.

  g. after the audit selected the option you need to install and click Next to install.

  Question remains always use same method 2.

  Method 2:

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  Method 3:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

  For reference:

  Product HP LaserJet 1200, 1300, 2200, 2300, 3200 and 3300 Series - PCL XL errors occur when printing using the PCL6 printer driver

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=238320&prodTypeId=18972&prodSeriesId=238320&ObjectID=bpl10637

  I hope that the above information is useful!

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• LaserJet 1300 driver for Win7 problem

  Plugged my Laserjet 1300 in my new computer (System 7) via USB - and Windows could not find the right driver for it.

  I cancelled Windows trying to install driver automatically and put the original driver CD disc (Serial #Q1334-60107 ver 2.0) in drive.
  but I couldn't get Windows to recognize the printer, even after re-boots.

  Since I bought the printer some time ago, I checked for the updated drivers online, that would be 64-bit.

  I installed it:
  UPD pcl5 - x 64 - 5.4.0.11744.exe

  During driver installation, I plugged the printer & turned on at what I thought was a good time. I see this:
  'HP Universal printing PCL 5' as printer - but it will not be printed.

  I tried Windows "Uninstall" feature, but it does not show the pilot, to uninstall it - OR where the driver of the located.

  * QUESTIONS: How do I uninstall the driver? Use disk upd pcl5 - x 64 - 5.4.0.11744.exe OR original pilot #Q1334-60107 ver 2.0?

  What is the procedure for installing this?-I can't find anything, despite an afternoon of Googling.

  Thank you.

  Did you follow this guide to install printing? Installation of LaserJet 1300 Windows 7

  You shouldn't have to navigate to the driver you download. Actually stick it in the trash at the moment when you set "Add a printer", you must select "add a local printer. Ignore the writing to the right, which applies only if everything works properly. If you follow the guide at the top it should install correctly.

  No need to feel stupid and no problem at all to help. That's what I'm here for

  -Sean

• HP laserjet 1300: after updated W10 at another level cannot print locally on connected LaserJet 1300 preinstalled

  Recencly upgraded to Windows 10 year old PC.  The printer, usb, is a HP Laserjet 1300 and the upgrade found a driver and local printing works very well.  I have a home network that an old XP pc is connected to and used the 1300 without problem.  Upgrading to W10 came from W8.1 and whatever the driver he had allowed things to work.  On the XP poster print spooler and the error now.  HP Print and Scan Doctor run on the W10 pc indicates bad port, but it cannot be changed.   The port on the pc W10 is DOT4_001.  Doctor print run on the XP indicates that the printer is indeed available, but printing fails.  The W10 pc is W10 home so I can do the print management service to see what real driver has been installed.   The print doctor also pointed out that the full usb support is not installed.  I don't know what it is and clicking on get the software takes me to the center of hp supporot.

  I would appreciate anyones ideas on how to solve this problem.

  I got the printer work from XP to pc W10.

  The upgrade of the W10 has not created a home network as what was there in W8.1.  I had created and made there several days that the residential group names are the same, etc.  Even without the network in place, worked a ping from one to the other.

  I had old information to work for nearly 30 years as a programmer for fortune 500 company system and that he was referring to XP and more recent Windows system, demanding that internal guest account is active.

  W10 upgrade is not the active guest account.  I lit with a guest net user / activate: Yes and I tried printing and the bingo it worked!

• LaserJet 1300: Error when sending to print to the HP Laserjet 1300 printer

  Hello

  I've recently updated form Windows XP to WINDOWS 7, then to Windows Pro 10. I have HP lasejet 1300 printer. It worked fine with WINDOWS XP. I had the problem of printing when I got Windos 7, but it was resolved by installing with force provided for XP rather than WIndows 7 driver.

  Now, after upgrading to WINDOWS 10, I am unable to print, even if windows has automatically identified and installed a HP Laserjet 1300 PCL 6 printer.

  I tried to update the driver to download from the HP site. But without success in printing.

  When I send the command to print to this printer, I get the Message error in the list of the printer and document remain with the error. No data seems to be sent to the printer. I used troubelshot option already.

  Help, please.

  Ok. Problem is solved in my case. I have chnaged the printer driver to auto select HP Laserjet 1300 PCL 6 for HP Laserjet 1300 PCL 5

  Now with printing.

• HP laserjet 1300 not receive signals from computer

  HP Laserjet 1300 does not receive signals from my computer. Please explain

  Can you network or USB cable into the printer to the computer?

  What operating system do you use?

  If you are on windows 7 and network, you must check and make sure that the IP address of the printer is listed as the same thing in the port settings.

  If you are using windows 7 and you use a USB cable, you will need to load the printer via the IN-OS driver. See the link below...

  Install the driver included in the operating system Windows 7 (OS)

  If you use another OS or driver, please let me know.

• Windows 7 will not work with a hp LaserJet 1300.

  I have a hp LaserJet 1300.  Also, I downloaded and installed Window 7 Home Premium.  They do not work together. Yesterday and today you have listed as available for download a new driver for hp LaserJet 1300.  But it will not download, or at least something is happening which causes the download to say download window failed.  The 1300 is a very popular printer and is still doing a good job now.  When can we expect a reliable driver?
  Zola123

  When you download from? trusted source?

  have you tried to update using Device Manager and update driver?

  Support for HP LaserJet 1300, HP LaserJet 1300n HP LaserJet 1300xi

  http://h10061.www1.hp.com/ccsearch/search?pname=LaserJet+1300&opname=HP+Officejet+J4550+All-in-One+Printer&qry=driver&method=prodFinder&enc=UTF-8&ctry=us&lang=en&dlc=en&sni=3645097&search=0&submit.x=1&submit.y=12 Help others, tell us which solves your problem. Click useful Vote for those who help.

• Need a manual procedure for PCL 6 software Win8, HP Laserjet 1300

  I recently upgraded my PC to Windows 8.  HP Laserjet 1300 HP softeware compatible must must be installed.  I tried to download the software and installation/configuration but running the automated softeware fails on this printer.  Yes, I know it's old, but it works

  In the past, I was able to Setup and configuration of the drivers for this printer on XP, Vista, Windows 7.  The files ' Park - v1.7.zip "do not recognize this printer on Windows 8.

  Is there a way to download the PCL 6 drivers if I can do a manual install?

  Ed S.

  Hi Ed,

  First make sure you install the drivers USB of your product.

  If you have a 32-bit version to install the following file:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=238320&prodNameId=238322&swEnvOID=4131&swLang=8&mode=2&taskId=135&swItem=fp-109471-2

  For version 64 - bit use instead the file below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=238320&prodNameId=238322&swEnvOID=4132&swLang=8&mode=2&swItem=FP-109468-2

  If you are unsure of the version of your operating system, follow the steps below to discover this:

  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=130&prodSeriesId=4332585&prodTypeId=5169094&prodSeriesId=4332585&objectID=c02002390&prodTypeId=18972&prodSeriesId=238320

  Then the driver should be installed from Windows Update server by pluggin the USB to your computer.

  Also you can use the PCL6 UPD driver rather once installed the USB drivers, that depends on your version of the OS as well:

  32 bits:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=503548&prodNameId=3271558&swEnvOID=4131&swLang=8&mode=2&taskId=135&swItem=ds-99353-4

  64 bit:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=503548&prodNameId=3271558&swEnvOID=4132&swLang=8&mode=2&taskId=135&swItem=ds-99374-4

  Shlomi

• PostScript for laserjet 1300 drivers

  Hi, I'm looking for a pilots postscript for laserjet 1300 that I can't, and I'm sure it was on the site of hp...

  Hi again,

  Please, try the following steps and let me know if it works:

  1. Download driver HP UPD Postscript below:
     http://ftp.HP.com/pub/softlib/software12/COL40842/DS-99376-2/UPD-PS-x64-5.4.0.11744.exe
  2. Follow the installation, and then select traditional.
  3. Click Add a printer, and select a temporary port LPT1 to complete the installation.
  4. After completing installation, right click on the HP PS of universal print icon.
  5. Click on printer properties, enter the ports tab, and then select the port used for your device.
  6. Clisk OK to save the changes and try to print

  You can check the correct port to enter the properties of the existing printer printer icon and check what port is enabled for the installed devices.

  Kind regards

  Shlomi

• How to: Use Smart install wireless install your Laserjet on Windows 7

  Some HP Laserjet printers have Smart Install. This allows you quickly connect the printer USB cable and start the installation. In this way a CD or a CD player is not necessary to install your device. Once the installation program appears you can proceed through the installation. The following video demonstrates how to use Smart Install to install your laserjet on a wireless network.

  Smart Install of Windows 7 - HP LaserJet P1102w wireless

  I hope that the information and the video above helps. If anyone has a problem or has any questions, feel free to ask. I'm more than happy to help.

• LASERJET 1300: fatal error in laserjet 1300

  I bought a 'new' in the Laserjet 1300 to a thrift store box when I turn it on it shows "ready" light, works, all gears seem to be turning, doing this for about 1 minute, then stops and shows fatal error, turn off and turn back on, same thing, any help?  error fatal high school talking about the engine, the engine turns during the minute before the error.

  This is the engine error but it could be the motherboard, but all first I remove the cover and make sure that the Ribbon connector going to the laser/scanner Assembly is in place.  I know that the laser/scanner cable can give the defective engine error.  You will also want to check the other wire that goes to the laser/scanner Assembly to ensure that it is correctly connected at both ends.  It is also possible that the formatter is bad.

• LaserJet 1300: is it laserjet 1300 printer driver for Windows 10?

  I just bought a new laptop for home use - Windows 10 rounds.  I've been using a printer LaserJet 1300 (connected to a docking station, which is connected to the laptop) during the years that I LIKE, but can't seem to find a driver for printer LaserJet 1300 for WIndows 10.  It does not exist, and if yes, what is the link to it?

  The drivers are all the same, no matter what port is used.  The port just determines the method to which the work reached the printer.  Parallel, USB or network.  Parallel ports of will disappear and most computers only support usb and network as well as some who support wireless where the printer has wireless capabilities.  Here is the link to the drivers on the hp site.

  32 bit

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=238321&swLangOid=8&swEnvOid=4191

  64 bit

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=238321&swLangOid=8&swEnvOid=4192

  You may also download driver usb, since it seems that hp has a special for use with the printer driver.

• Win 10 install on vista?

  * Original title: 10 for vista

  win 10 install on vista

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first, make sure that you have the correct system requirementsand the manufacturer of your computer provides the correct drivers to 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• HP 2000: HP 2000 Win 7 Install again after replacing hard drive

  The hard drive has been replaced in my HP 2000 and Win 7 installed from the disc.  Several drivers are not present.  How can I know what drivers I need for these:

  Ethernet controller device Instance path

  PCI\VEN_10EC & Dev_8136 & SUBSYS_1854103C & REV_05\4 & 87C21B2 & 0 & 00E3

  Network controller device Instance path

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01\4 & 15ED5F19 & 0 & 00E0

  PCI Device Instance path

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1854103C & REV_01\4 & 18138212 & 0 & 00E2

  Communications Simple PCI controller Device Path Instance

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1854103C & REV_04\3 & 11583659 & 0 & B0

  SM Bus controller device Instance path

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1854103C & REV_04\3 & 11583659 & 0 & FB

  Without the ability to update the drivers from the network, it has been difficult. I tried searching online with this information, but can't seem to find the required driver.  Any help would be most appreciated.

  Thank you!

  Hello:

  Here are links to the drivers you need in the order you posted the ID:

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56680.exe

  Network controller:

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp56572.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp64801.exe

  Communications Simple PCI controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56675.exe

  SM Bus controller: NOTE: first install this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56670.exe