HP laserjet 1300: after updated W10 at another level cannot print locally on connected LaserJet 1300 preinstalled

Similar Questions

• After updating Windows 10, the CPU cannot push frequency.

  After updating Windows 10, the CPU cannot push frequency. The setting of the battery's performance. Alienware 15. Really need help

  You will probably get a better response if you re - post it in the forum of the Club of Alienware

• After update to Firefox 32.0.3 print dialog box will not apear in Win7Pro/XP after awhile, but a restart of Firefox will allow him to appear again...

  After update automatically to 32.0.3 Thursday last Monday on the computers of all of our employees and boss both Win7 pro and XP pro, we saw Firefox sessions that will not bring the print dialog box. The print preview dialog box will return but no button print or print menu to display the print dialog box. After you close Firefox and reopen the print dialog box works again for some time. Web sites that use boss and staff during a session are different and appear to be the cause. Firefox settings are at fault because simply restart of Firefox just solves the problem and no other web browsers or application has any problem with the display of the dialog box print at any time. Again, that has started on all computers as soon as 32.0.3 was automatically installed during the night.

  Thanks Guigs2,

  Our users done restaring Firefox so I couldn't get this info.
  Now, it seems that the issue may have been corrected in v33.

• error after update of the code and cannot re-boot

  After being asked to download an update from Windows on the Web and then to restart my computer two days ago, since then, I could not restart. I tried all the options available to start, restart, safemode, guest C (which I didn't), networking, you get the idea. I'm not savvy computer even if when I get to that screen I ' don't know how to get a "command prompt". I select options and they stop is to ' CHKDSK checks the index / an unspecified error has occurred "or! 0xc0190036! XXX/47373 (wer.dll)"or" Loaded: \windows\system32\drivers\crcdisk.sys please wait "in no case have I've been able to release one of the screens, once they get to this point, did I was able to reboot Windows in any mode whatsoever. I'm in Germany at the U.S. military running on a laptop with Vista. Help!

  1. how to record data, if necessary,

  2. put it back to factory settings.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• After update to version 34.0.5 I can not connect to Storage on windows XP using Firefox or 8. It gives a message cookies are blocked. What should do?

  After Firefox updated Dec. 9, I can't connect you to MyYahoo or Yahoo mail using Windows 8 or XP sp3. When I try to log in it States cookies are rejected. I followed all the directions for removal and confirmed the parameters. Œuvres MSIE. I tried to remove anti-ad and filter Firefox Add-ons because Firefox has started to freeze. I have fixed the freezing point, but still cannot connect to Yahoo. I added Yahoo lists of exceptions, but it did not help.

  Hello speedy65, please try to reset firefox and see if that can solve the problem...

• After updated to 9.3.3 cannot access purchased music

  A user can listen to is music bought from iTunes in offline mode; She is invited to use an internet connection to listen-she was able to listen before offline.

  Any ideas on what's causing this and what we can do about it?

  Thank you!

  If it must be online to play music, then that implies that the music is not downloaded (or sync) on the computer/device - she tried it download/sync and then see if she can play in my music if you use a computer, a music application if you use an iOS device?

• After the upgrade to el capitan, cannot print Canon mp970

  Upgrade to El capitan in snow leopard, and now I can't print from my Canon mp970. I went to the site Web of Canon for a printer driver is compatible with the new operating system - found nothing. Found some threads on Apple support community and found a suggestion that recommended to download and install the Gutenprint (CUPS + Gutenprint v5.2.11 - simplified pre2) software. I did that and removed the driver from Canon, but still cannot print. The message I get from the printer is: 'you need to install the software to use this printer. " To install the software, choose App Store... from the Apple menu. If the software for your printer is not available in the App Store..., contact the manufacturer of your printer. »

  Any suggestions on what to try next?

  Hi Dellis46

  I met the same problem and tried several things before finding the solution for the print job. You must install the drivers 'old' Mountain Lion. They still do the job.

  Go to: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-833845&os=OS%20X%2010.8%20 (mountain % 20Lion) & language = EN

  Download the .dmg package and open it. Dubbel click .dmg package and follow the instructions. Connect your printer by a usb cable and turn on the printer. If not now, it won't work!

  Then, go to the apple/menu logo and choose Preferences system - open printers & scanners - click on the button "+" under and on the left side.

  If the printer is on and the installation of the finished, .dmg package you should be able to see in a new menu 'Add printer' one or more printers. Add one you need. If your mac is connected to the local network you will see a usb and printer of netwerk MP970 canon MP970 canon (network printer takes a while to appear), including its network address. Add the two printers and name them differently to avoid confusion.

  Now everything should work.

  It is for the printer. I can't understand how making the scanner works. Run the .dmg package for the scanner is not operate :-)

  If someone is tried: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio (mountain % 20Lion) nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-966569&os=OS%20X%2010.8%20 & language = EN

  I'd be more than grateful to the person who in fact occur...

  See you soon!

  Tjerri

• HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

  My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

  I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

  On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  Among the many solutions, I tried turning the firewall. No help.

  I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

  Someone who has a solution?

  Hello!

  Thanks for your suggestion of a solution!

  First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

  Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

  In any case, there where the pleasure with your help!

• After the major update W10, Acrobat 9 will not document "% [ProductName: distill] %% found Calibri, using Courier." %% [Error: invalidfont;] "[OffendingCommand: xshow] % '.

  After the major update W10, Acrobat 9 does not create a document not found 'Calibri '.

  It worked doesn't mean anything. 'Inconsistent' means that it was not tested, nor is it updated to work with this version, as it is updated, which can result in what you feel. You can try to run the application in Compatibility Mode, but the chances of work without problems are slim. The real solution is to upgrade to a compatible version.

• HP LaserJet MFP M127fn Pro: Cannot save a HP LaserJet Pro M127fn MFP scan after update Mac Sierra

  I have a HP printer/scanner/fax multifunction, and after updating my Mac OS X Sierra, the "HP Scan" app does not allow me to save my scans more. Printing seems to work very well. Scanning occurs, but when it comes to saving what I scanned, 'save' button is grayed. I have read elsewhere on the forum than what has happened to other people using ordinary scanners (not multifunction units), but the software offered for regular scanners would not apply to my device.

  Hello

  It is incompatible with the Sierra of HP scanning.

  Download and use HP Easy Scan instead, it can be downloaded from the link below:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Kind regards

  Shlomi

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• Slow MacBook after updating to mac os sierra

  Mac book is very slow after updating to mac os sierra. I try to open an app and its very slow, or finder

  How can I fix it?

  I already rebooted it but no luck

  I have a mac book pro end 2011 version 10.12

  Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this please. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac.

  Then, shut down your Mac and restart in 'Safe Mode '. To learn how to do it please read: try safe mode if your Mac does not start-up. Compare works your Mac in Mode for how safe it was.

  Then restart normally. If the same problem comes back, please read the section If a problem does not occur in safe mode for actions recommended to Apple.

  Finally, you can temporarily create a new user account and log into this account to determine if the problem also exists when connected to this account. To learn how to do read how test a question in another account on your Mac - Apple Support. When you are finished troubleshooting, you can remove the temporary user account by following these instructions: OS X El Capitan: remove a user. Before you delete, confirm that you have not need of all the files that you have possibly set in this account.

  Let me know what you decide.

• Anyone Bitmoji keyboard stop working after updating iOs 10?

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  jerseryjones4 wrote:

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• every night does not start after update

  Win 7 x 64
  42.0A1 every night
  Does not start in normal or safe mode after update. Tried - safe-mode and shift method.

  Last crash Crash ID ID: bp-2bd17147-3a07-458b-9c89-4a37e2150718 doesn't mean anything to me.

  I can't put up with these accidents more. I worked on it for over 2 hours today.

  Please, someone help quickly.

  Hi rob86, every night is an early pre-release version where instabilities are expected. If you want to have a more stable environment, please use another channel: https://www.mozilla.org/firefox/channel/#firefox