Win 7 | LR 5 CC: changes do not transfer when I copied my images on new hard drive

Similar Questions

• If I do not support until my MBP before installing a new hard drive...

  Very quick question:

  If I don't support my hard drive before installing a new hard drive, SSD, the MBP (early 2011) "know" download all the OS X software appropriate and that sort of thing? I guess my question is: is the part of the hard drive of the same hard drive recovery? Or on a separate physical disk.

  I don't have a time machine, and it would probably be easier to start from scratch.

  Thank you!

  If your computer comes with 10.6.8 or earlier and did not have its updated firmware updated to use Internet Apple system recovery, it is only on the internal drive. Otherwise, separate recovery methods are in the firmware and the drive internal.

  (139248)

• I have a laptop with a copy of windows 7 that is expired evaluation and I need to reload win xp on it but it does not say that my copy of evaluatioin is newer

  laptop that has a clean load an assessment of win 7. It has been stored and the evaluation copy has expired, so I need to load the copy of win xp it cam with and windows 7 is not let me load Windows XP

  You need to boot from the Windows XP disc:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• AutoPlay does not work when it is connected to an external hard drive

  My system is installed with Vista. Lately I noticed that whenever I connect an external hard drive/USB or load a DVD. the AutoPlay function does not work. I tried to make changes via the Panel control, but without success. to access the device, I opened MY computer and open the unit. Please help how can I reset the auto run System. Thank you.

  Have you tried the "Reset all default settings" button in the control panel?

  See if it helps:

  Reading auto/AutoRun not working do not or not missing not open in Windows Vista
  http://www.mydigitallife.info/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  WARNING: There are some parts of the article that involves the registry editting. Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Modify the registry at your own risk. If you are not comfortable editting the registry request assistance from someone who knows.

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.

• I see an activation which invites when I enter my product key says that's an upgrade install not the device, this worked fine on my old hard drive.

  Prompt for activation!

  Changed the hd on my pc and upgrade to ultimate version so I had to install xp first.  Now, I see an activation which invites when I get home my says product key is for upgrade not clean installation, it worked well on my old hard drive, there is no option in the wizard product activation phone how to turn it on

  Update install requires that the eligible previous operating system is installed and activated until the key is working.

  Yu seem to have correctly installed the OS upgrade - and it will never work without assistance.

  If - and only if - you have a valid COA sticker on your computer, you can try either by calling the line Activation, as suggested by Riz_Ford, or you can also try the method of double-install from here...

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media

  Note that the same procedure applies for WIn 7 for Vista.

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• Satellite Pro 2100 - new HARD drive is not booting

  Hello
  I wanted to update my SP2100 with a WD1200BEVE. (120 GB of WD).

  Copy of disk via USB + speakers worked, but after changing the disc nine does not start: the laptop hangs up with blinking cursor.
  Already checked that the partition is active and even a new installation from a CD of XP has the same result! The BIOS seems to accept the drive (if not installing via CD should have failed) so where is the problem?

  Any tips?

  Hi Kannengiesser,

  Which is really strange that you can t start up disk even it s recognized in BIOS correctly...

  You have the Toshiba Recovery disk? If so, you can try this disc factory settings. If it works, it was just an installation problem.

  But I couldn't imagine also that the new HARD drive is not working properly last week I had a similar problem. Made a HARD drive upgrade, but a few days later Windows didn't start because the HARD drive had a bad sector, now I'm waiting for a replacement drive.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Windows Update does not work after new hard drive

  After you install the new hard drive, when I click on windows update, it opens, makes his scan, then I get the message, (the website has encountered a problem and cannot display the page) I have a Dell Optiplex 745 running XP Pro, Explorer 8, have tried several times and restarted, please help.

  What do you think of will be without safety last cumulative update for IE8 be manually downloaded and installed before going to windows update to nothing at all.  What will happen is the CPU at 100% and a whole lot of nothing else of fortification.

  Do not go in line with the hopes of getting the updates of windows after the installation of SP3.

  Disable automatic updates in Control Panel > automatc updates > disable automatic updates

  Start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  Get the exe to install offline full download for IE8 [should represent approximately a 16 MB file] and then install IE8 after SP3 and the decline of the ability to download updates for IE8 at installation time.

  Then manually download and install the current cumulative security for IE8 update and restart the computer.

  visit Windows Update through your browser link in the start menu.  Consent to any ActiveX install queries and validation / advantage genuine offer and cross your fingers.

  It is possible that you may still have questions, but this will reduce some of the problems if you follow the recommended sequence.

• Acer recovery disks do not install Windows 7 on a new hard drive SSD

  Hi all!

  I have Ace Aspire 5742 G laptop and I have problems to install the Windows 7 operating system on my new hard drive SSD (I bought the SSD because the original hard drive is defect and do all the time... blue screens)

  For the factory restore, I use the restore disks. I burned the discs a few years back when the laptop has insisted me to do (using eRecovery or something, in total 3 dvds).

  Testing of computer to install the operating system with the DVD (asked to insert a dvd and then press a key). The real problem is that the installer will just in loops, restart and eventuallyfreezing in the end...

  Restart--> Acer--> Windows logo takes over... files-> from windows-> reboot-> etc.

  Which continued for more than an hour (on the first dvd!) and all of a sudden that it froze right on screen "starting windows..." I had to restart and stars on again once.

  I can still use my old formatted HARD drive, should I do the new set of recovery disks or use a USB?

  Thanks for the answers in advance!

  FR.
  Barbarian90

  I was not able to edit my previous post, so I'll make a new...

  So I thought (with the help of Google) that the problem was that I had installed the new DDR3 memory game. When I changed them back to the original ones (2x2gb) everything worked smoothly.

  anyway. Thanks for the help!

• How to install win xp pro (upgrade verdion) on a new hard drive

  I have a win 95, 98 and xp - pro upgrade disks and would like to know how to install the OS xp - pro, one a new 80 gig hard drive. I run two other computers with win xp - pro. years, I installed win 3.1 and updated for win 95 and win 98 and then then to xp - pro. Are there more recent methods today to install xp - pro on a new hard drive?

  . Are there more recent methods today to install xp - pro on a new hard drive?

  Hello

  There is no change in the installation of Windows XP mode.

  The only thing to do is to put the XP disk in the CD-ROM and follow the on-screen instructions.

  How to install or upgrade Windows XP

  http://support.Microsoft.com/kb/978307

  Kind regards

• Hi I reinstalled my Win XP Home because the current drive was getting old. But I installed it on a new hard drive connected as "Slave" but now he can't start

  I have connected the new hardrive as a 'slave', re-installed my Win XP even & re-patched everything on it including SP3, programs & ups back-ups, but oh no! the new hard drive when it is plugged in as a 'master', it does not start!

  But with the old hard drive connected as long as 'master', I have the option of "dual boot".

  I guess because my new drive is not a reader of "system"? I can see that my old drive is listed as 'system '. How to make my other even without having to re - install all over again? Thank you!

  Hi Fishlipps,

  Thanks for posting. Most likely you see it as your boot.ini is located on a drive corresponding to your system on a different drive. The easy way to do this would be to reinstall or do a repair on the computer installation. Please make a backup before attempting this.

  1.	When the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.
  2.	When you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to the Setup screen, press ENTER.
  3.	Do not choose the option to press R to use the Recovery Console.
  4.	In the Windows XP licensing agreement, press F8 to accept the license agreement.
  5.	Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  6.	Follow the instructions on the screen to complete the installation.

  Another option would be to modify the boot.ini located directly on the root of your drive. Below is a knockout with instructions on how to do it. However please backup all your data by doing one of them because both can make your computer unbootable.

  http://support.Microsoft.com/kb/289022 Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sharing Facebook picture is not displayed when I use an image which is transferred to Eloqua

  Hello

  I've implemented the standard functionality of sharing Facebook on a Landing Page.

  Anyone know why the Facebook sharing image is not displayed when I use an image which is transferred to Eloqua.

  As soon as I change the path of the image to an external server/site, the Facebook sharing image does not work.

  Any ideas? Everyone knows about this problem as well? And can it be resolved without the help of an external server/site?

  Thank you in advance.

  I suspect it's the media as well. To test that for sure, drop this URL in bitly to get a shorter URL without brackets and replace the longer URL, bracketed by the short URL. What will you do at least know whether or not that is the question.

• Added raw lun mapped as a new hard drive, but VM does not see it.

  ESX 4.0 with two Windows Server 2008 virtual computer running.

  Created with SAN volumes and put at the disposal of the ESX host.

  I went in with my client vSphere virtual machine settings and added a new hard drive > mapped raw lun, stored with VM, physical and everything seems to set up correctly after hitting good. I also increased the size of the other two disks on this virtual machine. I rebooted the VM and connected to the server to find that he does not see the new drive, or he does not see the new size increases for other readers. I rebooted the host and yet, nothing new.

  What have I done wrong? Why these changes are not recognized by the virtual machine?

  After the increase in the size of disk or adding new disks, you must go the the VM Windows disk management and resize or format/partition/boot disks.

  André