Connectivity using 10.11.3 problem (15 d 21)

Similar Questions

• Connect using Apple Watch does not

  I can not activate the feature that allows you to connect using the Apple Watch. When I check the box I get only a message stating that I needed to activate 2 factor authentication. But it is already enabled. Someone else also knows this problem?

  Thank you
  Oli

  Which iMac model do you have?

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.

• Portege R500 could not establish a connection using Novatel Mobilink

  I am unable to make a connection using the software of Novatel Mobilink on my new R500.

  I installed * XP * and installed the relevant downloads on the Toshiba site, i.e.
  Power RF 3 G v 1.0.1.8 control utility
  MobiLink 2.0.2.1.8 v
  Wireless Broadband Mobile v 3.0.0.3

  My SIM is detected OK. I created my profile and checked that my APN, username and password are correct. When I try to connect I get the Mobilink network connection manager * error 619 * saying that perhaps my profile settings are not correct.

  However, if I create a connection by modem with exactly the same settings that the connection works fine.
  The only difference is that I use windows dial up to start the connection rather than Mobilink.

  Put Vista on the laptop the Mobilink connection works fine as well, it seems that if you want to do with XP, so I think that there could be another driver or patch required.

  Anyone had similar problems using Mobilink to initiate the connection?

  Any ideas would be welcome?

  Hello

  I m not an expert in Mobilink network connection, but I goggled a bit and discovered that if this error 619 message you should do this:

  S ' ensure that the data card is inserted into the laptop.
  -Go to compose (i.e. start-> Control Panel-> network connections) network connections and delete the profile called 3 G connection.
  -Try and launch a data call via Mobilink software. It should work now and the 3G connection profile visible once more.

  The following are the possible causes of an error 619 _Other: _
  -Name (APN) access point is not correct (i.e. incorrect characters for example)
  - or not entered at all.
  -Wrong username and/or password used.
  -The used SIM card is not associated with the required AFN

  Good luck

• Satellite Pro L300: Could not establish connection using WPA / WPA2-PSK

  Hello

  I have a Netgear FVG318 router with the new firmware and problems to connect using WPA-/ WPA2-PSK with Realtek RTL8187B integrated.

  With the help of WEP that works. I did a complete restore of Vista and installed SP1 + all Windows updates. No change...

  Then I tried using a Netgear USB WLAN Stick WPN111--> the same result, works only WEP.
  I rechecked the shared key before!
  After that I tried with a HP laptop, wonder... everything works! WEP, WPA / WPA2-PSK works! What do you mean?
  I think that there is a software problem in Toshiba-Vista version.

  Do you have any idea? The support has not helped me.

  Hello

  What you need to do is first of all update the WLan driver and if possible, you should check if the latest BIOS is installed too.
  I had similar problem on my A210 and all first I've updated the BIOS, then driver WLan.

  This helped to establish the WiFi connection.

  Check it out!

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.

• Get rid of the current wireless network connection so that I can set up a new connection using the same IP address.

  Here's my problem: I got a new computer and a wireless network connection has been set up and I could get on the internet. My daughter then wanted to try her new computer and somehow his computer is defined as the network and I can no longer connect to the internet via my computer.

  The second part of my problem is that when I try to configure my computer, I get the message that I need to go to the Micro knowledge base and article 871122.
  I did it.  By following the instructions for Windows configure my wireless, I get as far as the stage of network connections - go to change the settings for this network connection.  It is said that I had to go to the wireless network tab.  There is no tab wireless network I can say to use Windows to configure my network connections...

  I know it is long, but can someone help.  I use Windows XP Prof 2002 with service pack 3 version. Thank you adpotate

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• Cannot connect to the HP connected using Internet Explorer 11

  Cannot connect to the HP connected using Internet Explorer 11.   When I use another computer that is running a different browser like Chrome, Opera, or Firefox it connects and I can connect without problems.

  Does anyone know if HP is working to correct this problem?

  I guess he tweaks on ie11, others are able to connect (I just do):

• The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server?

  All new computer running windows 7 64 bit, outlook and office 2007 installed, initial problems with the temporary user profiles, follow up advice and removed user profiles in the system registry and all seemed to go well. Computer works for about a week with two user profiles and now all of a sudden I get an error message when I start Outlook and from time to time when you browse the internet, it reads:

  The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server? (If I hit Yes then I can send emails)

  When I open view certificate it says: this root CA certificate is not approved. To enable trust, install this certificate into the store certificate authorities roots of trust. (Attributed to and: Cisco device demo certificate - valid from 10/02/2009 to 03/10/2019).

  Problem is I don't know what the certificate is, what I need, to find out how locate, how to move etc, I have read a few forums, but they are starting to be too technical. I need help for step by step easy.

  I tried to uninstall outlook 2007 and reloading and clearing of the States of ssl in internet options, and then reset by default (as someone suggested), but it made no difference.

  Problem is when you leave the store with the new computer, nobody wants to know you if you need assistance!

  Can someone please help? Thank you

  Hello

  Welcome.

  Just a tip, never download and install anything on your PC, unless you know and trust him.

  > «Computer brand new...» I need help for step by step easy. »

  Contact the PC manufacturer emphatically support team.

  > ".. . Office 2007 installed...

  Support to the: http://answers.microsoft.com/en-us/office/default.aspx#tab=1 and ask your question in Outlook it.

  You can also check if this problem occurs when you use Windows Live Mail, which can be downloaded on: http://download.live.com/wlmail.

  > «Server that you are connected using a security certificate which cannot be verified...» »

  Just learn more about the certification of server to the: http://en.wikipedia.org/wiki/Certificate_server .

  Remember: keep the system tools and security update.

  Success.

  Rgds.

  itconcerned

• Users of VPN cannot connect using application using port 3404

  VPN users are connecting using vpn tunnel to destination of a pix 515e however, they are unable to use the connection on port 3404 application. He used to work, or so I was told, but it no longer works. What I am doing wrong? Please notify. Here is the config:

  IP 192.168.0.3 - dealer 192.168.0.5 pool room

  IP pool local DYNAusers 192.168.1.2 - 192.168.1.20

  IP pool local DYNAusers2 192.168.1.21 - 192.168.1.254

  vpngroup address pool DYNAusers PCPVPN01

  vpngroup 192.168.x.x wins server PCPVPN01

  vpngroup PCPVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 PCPVPN01-time

  vpngroup password PCPVPN01

  vpngroup address pool DYNAusers WELLVPN01

  vpngroup 192.168.x.x wins server WELLVPN01

  vpngroup WELLVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 WELLVPN01-time

  vpngroup password WELLVPN01

  vpngroup address pool DYNAusers2 SRVCVPN01

  vpngroup 192.168.x.x wins server SRVCVPN01

  vpngroup SRVCVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 SRVCVPN01-time

  vpngroup password SRVCVPN01

  permit 192.168.1.0 ip access list DYNAsplit 255.255.255.0 192.168.0.0 255.255.25

  5.0

  permit access ip 192.168.0.0 list DYNAsplit 255.255.255.0 192.168.1.0 255.255.25

  5.0

  DYNAsplit list of allowed access host ip 209.42.50.82 192.168.1.0 255.255.255.0

  DYNAsplit ip access list allow any 192.168.0.0 255.255.255.0

  access-list DYNAacl 60 allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0

  Permitted connection ipsec sysopt

  Answer sheet crypto ipsec transform-set esp-3des esp-md5-hmac Dynamics

  Crypto ipsec transform-set esp-3des esp-sha-hmac To_NHP

  Crypto-map dynamic DYNAmap 30 game of transformation-dynaset

  card crypto VPNtunnels 30-isakmp dynamic ipsec DYNAmap

  map VPNtunnels 40 ipsec-isakmp crypto

  crypto VPNtunnels 40 card matches the address 150

  card crypto VPNtunnels 40 set peer 70.151.5.114

  card crypto VPNtunnels 40 the transform-set To_NHP value

  card crypto vpntunnels 40 the duration value of security-association seconds 3600 KB

  s 4608000

  VPNtunnels interface card crypto outside

  partner-30 map ipsec-isakmp crypto

  ! Incomplete

  ISAKMP allows outside

  ISAKMP key address

  subnet mask 255.255.255.255

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 30

  ISAKMP policy 30 3des encryption

  ISAKMP policy 30 md5 hash

  30 2 ISAKMP policy group

  ISAKMP duration strategy of life 30 86400

  part of pre authentication ISAKMP policy 40

  ISAKMP policy 40 3des encryption

  ISAKMP policy 40 sha hash

  40 2 ISAKMP policy group

  ISAKMP duration strategy of life 40 86400

  Hello

  It is good to hear that the problem has been resolved. Please note do you have for the job?

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: the server that you are connected using a security certificate that couldnot be checked when sending emails in Windows Live Mail.

  DEAR SIR

  IM USING WINDOWS7 HOME BASIC

  MY PRODUCT KEY IS:.

  Original title: in the face of security problem.

  * Removed *.

  WHEN IM USIND WINDOWS LIVE MAIL I'M FASING THIS TYPE OF PROBLEM WHEM IM SENDING EACH EMAIL.

  THE SERVER YOU ARE CONNECTED USING A CERTIFICATE OF SECURITY THAT COULDNOT BE VARIFIRED

  A CERTIFICATE CHAIN TO PROCEED BUT TERMINATE IN a ROOT CERTIFICATE WHICH IS NOT TRUSTERD BY the PROBIDER OF TRUST.

  DO YOU WANT TO CONTINUE.

  Y OR N

  WHEN IM CLICK YES THEIR MAIL HAS BEEN SENT.

  WAIT FOR YOUR SOLUTION

  THANX

  Hitesh salvation,

  As you mentioned, you use Windows Live Mail, you can post your question to the Windows Live Mail support for assistance.
  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect using the Cisco VPN client

  Hi all. I recently configured a 5510 ASA to allow remote access using the Cisco VPN client. The problem is that everything works fine when I connect using a modem classic or on a computer with a public address that I use for testing purposes, but whenever I try to connect with on an ADSL line, I can't access to the resources. I have connection and after that nothing, I can not achieve anything.

  I enclose the relevant configuration information in the attachment. Any help is welcome.

  Depending on the version, add...

  ISAKMP nat-traversal

  or

  ISAKMP nat-traversal crypto

  Should be all you need.

• Multimedia file sharing only works if the two devices are connected using the same protocol

  So I'm frustrated!

  I spent an hour trying to get my Windows 7 computer to share my music with my XBox 360. I have two machines on my network, one connected by Ethernet to the router and the other connected by WiFi. I tried everything I could find online to get the WiFi connected machine appears in the "Music Player" on my XBox system - follow all sharing, make sure that my router has UPnP, restarted a bouquet of services, etc..
  Nothing! During this time, my machine connected to Ethernet was watching me in the face. He has appeared on the XBox without problem. I started to compare the settings on both machines and found no difference.
  Then I remembered, boredom, I had setting up WiFi sync for Windows Phone my wife. In fact, it was this session of troubleshooting that lead me to put this machine on the WiFi in the first place! Seems to set up WiFi sync, Windows Phone and the target of the machine must be, not only connected to the same network (obviously), but for some reason any the $ @$ crazy, both connected by WiFi. I just connected this computer by WiFi - not happy, a faster speed with my wired connection - and immediately fixed the problem itself.
  Then, remembering that, I moved my XBox WiFi network and - presto - my second machine appears without a problem.
  My question is... WTF! ???
  This is ridiculous - this is the same network! Why things must be connected using the same protocol?

  Hi, Edward Petersen,.

  Please contact the Microsoft community. I'll help you solve the problem with sharing music using media sharing.

  Some routers isolate the cable connections and wireless, you can check if you have the option in the configuration of the router to share media

  If the problem occurs, you can contact the router manufacturer for assistance.

  Hope this information helps. If you need help with Windows, simply reply that we will be happy

  to help you.