Win 7 (Pro) - Dism/online/Cleanup-Image /RestoreHealth - 87 error - could not fix corupted file

Similar Questions

• Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

  Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

  DISM / Online/Cleanup-Image /RestoreHealth

  Management and maintenance of deployment images tool
  Version: 6.2.9200.16384

  Image Version: 6.2.9200.16384

  [==========================100.0%==========================]

  Error: 0x800f0906

  The source files could not be downloaded.
  Use the 'source' option to specify the location of the files that are required t
  o restore function. For more information on the specification of a source location, see
   http://go.microsoft.com/fwlink/?LinkId=243077.

  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  Ran according to this link repair instructions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/dismexe-online-cleanup-image-restore-health-failed/668ef107-5f4c-4959-Ba93-76d052452315

  Network list Service will not start.

  ---------------------------------------------

  Verifying the service dependencies. The following error message

  Win32: A dynamic link library (DLL) initialization routine failed.

  -----------------------------------------------

  Windows Update is able to operate, and I am able to download all of the updates.

  -----------------------------------------------

  Here is my DISM.log file for troubleshooting.

  http://pastebin.com/Z2Fc8JL4

  Excerpt from CBS. Only JOURNAL entries [SR]

  http://pastebin.com/1jn2SWPV

  Complete CBS.log for 2013-06-22

  http://www.sendspace.com/file/hdq0yu

  You get the error 0x800f0906 because you have installed KB3022345. Uninstall it by going to programs and features in Control Panel and then click on the link "View installed updates".

  In the Find box top right, copy and paste (or type) KB3022345 and when it appears in the list, on the right, click on it and choose uninstall.

  See these two articles for more information on the subject: Microsoft confirms patch KB3022345 SFC/scannow breaks

  Windows patch KB 3022345 triggers apparent file system corruption

• IS THERE A PROGRAM MORE SHORT? DISM / online/cleanup-image /restorehealth

  Hello

  Every now and then I check my files on my computer to see if all are corrupt! I run SFC/scannow.  If there is no files corrupted at the end of the scan, usually, SFC / SCANNOW will not fix them! A technician came through this wonderful program called dism / online / cleanup-image /restorehealth! He totally corrects my CBS corrupted log files! The only problem is that this program takes so much time to run, I guess more or more! Is there a version of update, the shortest time of dism/online/cleanup-image /restorehealth program? I don't want another program that does the same thing if she requires a lot of steps!

  Thanks a lot for your help.

  HONEY BEAR 100

  E-mail address is removed from the privacy *.

  Hello

  Thank you for your quick response.

  I suggest you consult the following articles about the System File Checker tool & DISM command:

  System File Checker

  DISM commands to fix the Windows Image

  See also:

  DISM command-line Options Maintenance operating system package

  Hope the helps of information.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• I have synced my files of creative cloud (trial versions) to Apple MacBook Pro laptop. I always get an error message indicating that "some files could not be synchronized. What now? I'm at 2 GB of capacity.

  I have synced my creative files could (trial versions) on my Apple MacBook Pro laptop. I constantly get an error message that says, "some files could not be synchronized." I'm at 2 GB of capacity. What now?

  Links for synchronization of files that can help

  -https://forums.adobe.com/community/creative_cloud/host_sync

  -http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html

  -http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html

  -Size limits https://forums.adobe.com/thread/1488242

• I searched for a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.

• Retrieving error - could not find the path of the image... M:/RecoveryImage/install.wim

  So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.

  I contacted support and they issued me a replacement USB drive, I get the same failure.

  I diagnosed the HARD drive and it passes.  I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.

  [Under the direction of privacy] order number

  What gives?

  Acupro1,

  I you sent a PM with respect to research purposes.

• Error: Could not save 'file name' because the file name was invalid. (PS CS6 + WIN 7)

  I recently bought a new desktop in WIN 7, but also Adobe Creative Suite CS6.

  My first internal hard drive 2 TB is the second installed is from my old PC, 250 GB.

  I get this error when you try to save a file to a file using the Save"" command.

  The message is false, because the file name IS valid.

  This error is persistent.

  This error will not occur when you perform the same operation on my second internal hard drive.

  This error occurs on the files above about 1 MB in weight.

  What is happening is that the original file which I try to do the "Save" command gets corrupted and lost.

  If I do not use the command "Save as" to save my work under a different name, my work is lost.

  The same problem occurs with the CS6 PS 64-bit and 32-bit versions.

  I am very disappointed and annoyed with what is happening.

  Any idea what's going on here?

  Then Yes, sugarsync may have much to do with the error.

• I am trying to load Photoshop CS4 of DVDs to computer I5 Win 7 Pro 64 bit and it has an error and will not be installed.  Serial number deleted

  How can I tell if it is a question of 32-bit / 64-bit?  It's an old copy of CS4, but it should work on Win 7, shouldn't it?

  [Please do not post your key to series on the forums]

  Hi Wizbang_100,

  Please try to re - download Photoshop CS 4 after turning OFF all security software, firewall and browser protection tools that are installed on your machine.

  Download Adobe Creative Suite 4 products

  See also, How to download, install and activate Adobe applications

• Win 7 Pro (in the field) pasted on a public network (not clickable)

  On 50 computers in a domain at the moment, I have one that is hurting and stuck in the unidentified network (public) and gives me an IP address of 169.x.x.x.x.  And - the public network is NOT clickable to change this setting for work or at home.

  I tried another one on the same Ethernet cable.  This other computer gets a DHCP address immediately.
  The computer problem - tried another cable.  Not fixed
  So I excluded the Ethernet cable.
  I have reset the TCP stack.  Tired of DHCP and even a static IP address.  Went to secpol.msc and strategies of the network list manager and changed things around.  I restored the computer to an earlier date (like a week before).  I removed the NIC card and drivers and re-installed.  I logged on to the computer as another user and tried.  Tried MS: http://support.microsoft.com/kb/2578723/en-us and that did not help.  Nothing has worked.
  I'm enough ideas here.  Any suggestions?  There was a power outage in my client's office, the other night for about 10 minutes and the computer that has been affected.  User light work, newspapers - view cannot start any client/server application, then notice no (public) network connection and here I am troubleshooting and exhausted all my troubleshooting steps.
  Any suggestions on this?  IV ' e read countless discussion forums, and surprisingly, no one has a solution.  Just weird as this computer that was in production as 3 years - today, goes nuts and decides to change public.  First time ever for this computer.

  He solved.  It was the Ethernet cable.  I should have tried it first - but of course, I tried that last.  Once I put a new cable in - cause instantly connected and no more.

• Error: "could not steal the images and find another place and cover these" while trying to create the panoramic view

  Original title: Image Composite Editor

  Why isn't my images being created panaroma style? I downloaded ms direct Photothèque and then my pictures, then clicked on create composites, it is downloaded. then clicked on new panaroma and he gave me a message, it might not steal images and find another place and cover them.

  Hi NormaValdez,
   
  Here is an article that could be useful for:
  Photo Gallery: creating a panoramic point
  
  If this does not help, post your query in Windows Live Photo Gallery Forums for assistance on this issue.

• Imaging error: could not find indexable webviewable for content item

  Hi Imaging gurus,

  We have a requirement to implement the automation of the AP to Imaging.We did the part configuration.

  The documents are able to invoke the BPEL process and task are created, but we are not able to see the same document in Imaging.

  Layout error such as failed to find platelets webviewable to the content item.

  Please help me need solve as soon as possible in order to continue his tests.

  The default imagery storage isn't webless.

  Issue seems to be that of the storage rule.

  Follow the steps below mention details, this will solve the problem.

  Inside Oracle Fusion Middleware: BPEL Instances created by the imagery does not show Imaging

• Image processor "sorry, I could not deal with the following... * all."

  Hey! I so about 150 files opened in Photoshop. They are for a customer and the customer wanted individually to certain effects on each file. The files are RAW initially, first imported in Lightroom as .dng, then all my tonal changes made in Lightroom. I then opened images as smart objects in Photoshop, with a script of Lightroom. I then did the individual work on each image in Photoshop on the assumption that it would not trouble to save using the Image Processor script. When it came time to save, I tried save as .tif files using Image Processor. I selected the target in the form of open files files, set my destination folder, chose the TIF format and click on run in the top of the window. He shortly after said one very fast without source images, which disappears and then he says: "Sorry, I couldn't deal with the following" and then lists all of the 150 open pictures. It is a big problem because I'm on a lack of time.

  Any help or another idea for how to register all these images open in TIF or PSD even at this stage is extremely appreciated. I think there must be a fix or other road opposite to old fashion one save under...

  Thank you!

  !

  It doesn't look like the IPP will not new document either.

  He can. I added an option that can be set in the script to take care of this problem.

  //

  PROCESS_UNSAVED_IMAGES

  This will allow the treatment of unsaved images. To make this work,

  an unregistered image file is ~ / Desktop. If a file extension is

  not in the name of the image, .psd is used.

  //

  ImageProcessorOptions.PROCESS_UNSAVED_IMAGES = true;

  By default, it is false to get the 'traditional' behavior Set to true will leave PPI to process new images, not registered.