WIN server 2008 for the UCS 200

Similar Questions

• Satellite L650D - need drivers for Win server 2008

  Laptop model: Satellite L650D-PSK1SA-03E014

  before that I installed win7 32 bit OS.

  Now I want to change to 64-bit, but he says still no startup disk after the completion of copy and restart.
  I use the recovery disk that I burned after that I bought and used the System Restore Wizard.

  So I decide to install win Server 2008 r2 64-bit, installation is successful, but some hardware drivers can be find and install from the Web site.
  (I use win7 64-bit drivers, I read online, a guy said that it works on his laptop, but do not know why it does not work for me.)

  should I take the laptop to the support center and ask them to install the drivers for me?
  I'm not sure that this service is covered by the warranty or not.

  Or I can ask them to install win7 64 bit OS for me?

  Does anyone have the link to the drivers for win Server 2008 r2 64-bit?
  Thank you very much!

  As much as I know Win server 2008 is not supported by Toshiba, so you will not be able to find the drivers for it. Toshiba offers support for OS preinstalled only and possibly an upgrade if your laptop model is supported for the new OS.
  Warranty has nothing to with Win server 2008 so I think that guys will not be helpful for you. What they can do is to check if the original recovery image can be installed or not. If this is not the case, there may be a hardware problem.

• How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server.

  what I try to do is the following.

  I installed winserver 2008 on a machine and I created a folder for the individual. I want the individaul to connect in the folder ocreated on winserver 2008 directly from their desktop and laptop computers and their work so that all works are recorded directly on the server.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Cannot use remote desktop in Win Server 2008 r2 server

  I installed a Win Server 2008 r2 server and I am unable to use RD to access, firewall is turned off, RD config is configured to accept all versions what to do?

  Hello

  You will need to create a new post on the TechNet site for the server support, please see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Problem installing EM Cloud control 12 c in Win Server 2008

  Hi all

  I have a problem installing the EM in win server 2008 64 bit. I have already installed java run in time but when I click on the setup.exe in the disc 1 after having decompress it does not show the installation wizard and no error message. I missed something? I need to create the user group and the user as described in the installation guide as indicated in this link Installation of Enterprise Manager System - 12 c Release 1 (12.1.0.1)?

  Hi kpchong,

  Please check the following thread to see the solution works for you.

  https://forums.Oracle.com/thread/2558286

  Kind regards

  -Loc

• ORA-12560 on win Server 2008 R2

  I have an oracle DB 11.2 running under win server 2008...
  I can connect to a database, but when I need to make some changes locally, is not possible.
  
  so:
  -the DB and the recipient are running under a local system account
  -I'm loggin in a local admin (Administrator/pwd)...
  -ORACLE_SID is defined in Control Panel-> system (for all users)
  -tnsping locally is running OK
  -status lsnrctl LISTENER will return no error
  -sqlnet.ora has been defined:
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  NAMES. DIRECTORY_PATH = (TNSNAMES)
  
  -There is no remote_listeners
  
  PLS, help :)

  You missed:

  sets the path

  (Please run that on the win 2008 R2 command box and copy - paste the result.)

• Film photo Sony PMB 5.8 browser could not install under win server 2008 R2 SP1

  I tried to install SONY PMB5.5 and 5.8 and PMH on my Desktop Acer with win Server 2008 R2 SP1.

  I tried to installed in mode of compatibility win 7 and win XP SP3 but compatibility mode failed.

  'Cannot be installed because this program does not support the operating system on the computer of th.  This program requires Windows XP SP3, windows vista or later Windows OS"

  Please advise me how can I install it on my win Server 2008 R 2 stand-alone workstation.

  do I need to add some features to aro of role?

  Thanks in advance.

  Aung

  Hello Aung Kyaw Khaing,

  Your question may be the best answer in TechNet. Please click here to transfer your question in the Windows Server forum.

  They would be better able to solve your problem.

  Thank you

  Marilyn

• I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects

  * original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.

  Hi SCS PCs

   

  I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope this helps.

• Task Scheduler, Win Server 2008 - connected or not 2147942403 error

  I created a task scheduler with the Security Option to "run if the user is logged in or not."  But he fails even though I am connected with an error value: 2147942403.  If I change the Sec Opt to "Run only when the user is connected", the task will run flawless.

  I am a user (not administrator) on a Windows Server 2008.  The user name & pass are configured correctly.  Is that my Admin has to do to fix this?

  Hey Kevin,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• While Installing Win Server 2008 R2 error: 80070017 x 0 & 0 x 80070241

  While Installing Win Server 2008 R2 error: 80070017 x 0 & 0 x 80070241

  Please repost your request in one of the most appropriate Microsoft Windows Server Forums, thank you!

• VDA license includes OS Win license copy for the virtual office?

  Hello world

  We plan to go to desktop virtualization. For access to VDI, we were told that we would need microsoft VDA license that is a subscription based license. Main systems are thin clients and a few old desktops not covered do not SA
  I want to know if the VDA license includes OS Win license copy for the virtual office?
  Kind regards
  Vishal Claudia di Sisto

  Hi Vishal,

  Thanks for posting your question in the Microsoft Community.

  I question you posted would be better suited in the TechNet Forums.

  I suggest you to ask your question in the below link:

  Virtual server:

  http://social.technet.Microsoft.com/forums/en/category/VirtualServer

   

  I hope that the information above helps you.

• Cannot start ip-virtualization in Win server 2008 R2 (server role terminal server) on ESXi 4.1 U1

  Need help, pls

  Cannot start ip-virtualization in Win server 2008 R2 (server role terminal server) on ESXi 4.1 U1. User terminal session or program receives no DHCP or static IP http://technet.microsoft.com/ru-ru/library/ee382306 (WS.10) .aspx.

  

  On ESXi 4.1 U1 hypervizor run configuration:

  1 win 2008 R2 Enterprise (10.0.0.3)

  Roles:

  Servises (RDS) (ON IP-virtualization) remote desktop

  2 win 2008 R2 Enterprise (10.0.0.2)

  Roles:

  -Domain services AD

  -DNS

  -DHCP

  3 win 2008 R2 Enterprise (10.0.0.1)

  Gateway Kerio Control 7.1.2

  Terminal server server events: looks like everything is good

  

  Is of the opinion that the reason can in that the server must be started in the virtual environment.

  Help, please!

  Have you tried to uninstall VMwareTools as test? I remember at one point that there was some question about VMwareTools and R2 IP virtualization...

  VMCI driver provided by the tools has been the question if I remember...

  / Rubeck

• What kind of PDU like people for the UCS?

  I intend to deploy a UCS in the next month.  It seems that every UCS chassis requires four containers of L6 - 20.

  And we get two chassis.  While I was trying to get a couple of Pulizzi as ounces below.  Anyone prefers another

  type for better management or other reasons?  Also - L6 - 20 power is only option for the UCS?  Thank you.

  http://powerquality.Eaton.com/ePDU-LPC208-2p.aspx?CX=3

  There is a 110 plug in a PDU specializes in the basket.  Check with your Cisco representative for the part number - it works fine.  We have deployed about 100 chassis and it worked very well.

  Linda

• Size of the disk for guest Win Server 2008 R2 can be reduced?

  I have a thick provisioned 100GB size I want to reduce to 60 GB. The guest operating system is Windows Server 2008 R2. Does anyone have an experience by reducing the size of the disk with this guest operating system?

  I saw comments on the use of the converter to reduce the size of the disk, but the last Converter Standalone Client does not seem to support Windows Server 2008 R2.

  I tried to convert the virtual machine to a model and then to deploy a new virtual machine for the model too, but if I do that I'm still not able to change the size of the disk.

  The guest operating system is Windows Server 2008 R2. Does anyone have an experience by reducing the size of the disk with this guest operating system?

  VM converter can do.

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye